Chevybigblock1
Junior Member
- Joined
- Jul 20, 2016
- Posts
- 2
- Reaction score
- 0
- Location
- Pennsylvania
- First Name
- Jake
- Truck Year
- 84
- Truck Model
- K10
- Engine Size
- 540
Lift and tire size
- Thread starter Chevybigblock1
- Start date
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
Cameron84K10
Full Access Member
- Joined
- Oct 2, 2015
- Posts
- 51
- Reaction score
- 8
- Location
- Texas
- First Name
- Cameron
- Truck Year
- 1984
- Truck Model
- K10
- Engine Size
- 350
12 inch and 44s if I was to make a guess. And I dont think that color is stock but its a copper metallic color very beautiful in my opinion.
Chevybigblock1
Junior Member
- Joined
- Jul 20, 2016
- Posts
- 2
- Reaction score
- 0
- Location
- Pennsylvania
- First Name
- Jake
- Truck Year
- 84
- Truck Model
- K10
- Engine Size
- 540
Think I could get that same look with a 6" and 37's or 7-8 inch and 38's?
theblindchicken
Full Access Member
- Joined
- Oct 24, 2013
- Posts
- 1,518
- Reaction score
- 265
- Location
- SoCal
- First Name
- Christian
- Truck Year
- 1974
- Truck Model
- K10 5" lift + 2" BL
- Engine Size
- 350-4, 0.030" over
Tires more than likely wouldnt be nearly as wide. Those look to be 14.5 wide on a low backspacing rim.
Just be wary that you may have a ton of rubbing with a setup similar to that.
Sent from my SM-G935P using Tapatalk
Just be wary that you may have a ton of rubbing with a setup similar to that.
Sent from my SM-G935P using Tapatalk
dirtriderdd
Junior Member
- Joined
- Jun 14, 2015
- Posts
- 13
- Reaction score
- 0
- Location
- Georgia
- First Name
- David
- Truck Year
- 1984
- Truck Model
- K10
- Engine Size
- 305
what the wheel specs in the photo? I'm looking to get a wider stance. Currently running 35s on 15x10 with 4 inch backspacing. thanks
Rusty Nail
Full Access Member
- Joined
- Jan 29, 2015
- Posts
- 9,794
- Reaction score
- 9,698
- Location
- the other side of the internet
- First Name
- Rusty
- Truck Year
- 1977
- Truck Model
- C20
- Engine Size
- 350sbc
Nope. Not even close.
Those tires are almost completely outside the truck body... I bet that suckkks! Hard.
Makes me wonder how it got that clean?
Last edited:
Rusty Nail
Full Access Member
- Joined
- Jan 29, 2015
- Posts
- 9,794
- Reaction score
- 9,698
- Location
- the other side of the internet
- First Name
- Rusty
- Truck Year
- 1977
- Truck Model
- C20
- Engine Size
- 350sbc
I guess 12 inch lift. 15x12s. 4 inch backspace, stretched 40s. The wheel is too wide for that small of a tire.
That burnt copper is a Pontiac color? Trans Am?
That burnt copper is a Pontiac color? Trans Am?
Last edited:
Similar threads
