Clutch options

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Chris H

Junior Member
Joined
Aug 22, 2019
Posts
20
Reaction score
2
Location
Montana
First Name
Chris
Truck Year
1979
Truck Model
K2500
Engine Size
468
So...clutch is going out in my truck. Have 468 with 465 muncie and 205 transfer case. Trying to find good clutch to put in that dont cost an arm and a leg. Summit racing trying to get me to buy a $2000 clutch. Looking for something that will handle the 5-600hp range. What has worked for you guys?
 

roundhouse

Full Access Member
Joined
Apr 5, 2014
Posts
669
Reaction score
527
Location
atlanta ga
First Name
justin
Truck Year
77,78,79,80 ?
Truck Model
K10
Engine Size
350
I got a new non Chinese clutch and pressure plate from NAPA for about $250 but mine was a stock 350 engine , it was being driven by my 16 yr old son but had no issues with it

500 HP could be a problem with a stock clutch
I guess it depends on if you drive like a 16 yr old or if you drive like a 60 yr old
Although popping a clutch with 600 HP would usually result in a lot of wheel spin
 

Chris H

Junior Member
Joined
Aug 22, 2019
Posts
20
Reaction score
2
Location
Montana
First Name
Chris
Truck Year
1979
Truck Model
K2500
Engine Size
468
Lol. I know how I drove when I was 16....lots of wheel spin!!!
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,924
Reaction score
2,383
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
McLeod makes some pretty cool dual disc stuff for racers. Southbend and Valair (?) make stuff for high power diesel applications, not sure about gas though.

If you’re truly making 500-600 hp then I’d bet you need to spend $1000-$1200 for a real clutch. Cheap stuff is cheap stuff.
 

Nonstop

Full Access Member
Joined
Nov 16, 2014
Posts
775
Reaction score
2,419
Location
Ca
First Name
Nick
Truck Year
1985
Truck Model
K2500
Engine Size
454
I have a Sachs clutch in mine. It has held up to a big block and towing heavy along with pulling stumps. I do not drive like a 16 year old (too cheap to keep buying tires), but it has lasted quite a while. I bought it to replace my Centerforce Dual Friction when the hub on the clutch disc snapped off during normal driving.
 

Chris H

Junior Member
Joined
Aug 22, 2019
Posts
20
Reaction score
2
Location
Montana
First Name
Chris
Truck Year
1979
Truck Model
K2500
Engine Size
468
McLeod makes some pretty cool dual disc stuff for racers. Southbend and Valair (?) make stuff for high power diesel applications, not sure about gas though.

If you’re truly making 500-600 hp then I’d bet you need to spend $1000-$1200 for a real clutch. Cheap stuff is cheap stuff.


No clue of how much horsepower it be making. I just looked up on the Internet about how much horsepower they would put out on average. Just want something that'll hold up just in case. Thanks for the input.
 

Snoots

Full Access Member
Joined
Jan 23, 2013
Posts
8,655
Reaction score
17,743
Location
Georgia
First Name
Roger
Truck Year
1973
Truck Model
Jimmy Sierra
Engine Size
350 w/203
I've used RAM and McLeod clutches and have no complaints.

I don't think you need to spend 4 figures on a clutch tho to get something good and Made In America.
 

Chris H

Junior Member
Joined
Aug 22, 2019
Posts
20
Reaction score
2
Location
Montana
First Name
Chris
Truck Year
1979
Truck Model
K2500
Engine Size
468
I agree. 2 Grand is overkill. I don't mind spending three to five hundred bucks if I have to for something decent
 

Chris H

Junior Member
Joined
Aug 22, 2019
Posts
20
Reaction score
2
Location
Montana
First Name
Chris
Truck Year
1979
Truck Model
K2500
Engine Size
468
So I went with centerforce for a clutch. Installed and throw out bearing position seems too far off center. Instructions say self centering throw out bearing, but it seems too much. New fork same as old but I am wondering if I need longer fork. I will try and post a pic but having trouble doing that. What are some thoughts. Will it all settle into place? Seems unlikely to me. First time changing out a clutch so I'm unsure. Thanks.
 

Chris H

Junior Member
Joined
Aug 22, 2019
Posts
20
Reaction score
2
Location
Montana
First Name
Chris
Truck Year
1979
Truck Model
K2500
Engine Size
468
You must be registered for see images attach
You must be registered for see images attach
 

nvrenuf

Full Access Member
Joined
Jul 30, 2010
Posts
1,924
Reaction score
2,383
Location
Mobile, Al.
First Name
John
Truck Year
1991
Truck Model
K5
Engine Size
454
I believe the bearing should be centered on the clips at the end of the fork, not deep in the fork opening.

I could be wrong, it's been a while. Probably lots of YouTube videos on the subject, maybe double check there.
 

dvdswan

Full Access Member
Joined
Mar 11, 2014
Posts
2,366
Reaction score
2,026
Location
Port Orchard, WA
First Name
Dave
Truck Year
1978
Truck Model
K10
Engine Size
350
I believe the bearing should be centered on the clips at the end of the fork, not deep in the fork opening.

I could be wrong, it's been a while. Probably lots of YouTube videos on the subject, maybe double check there.


I've always thought that it just "floats" in the center over the fingers. The 2 clips were just there to hold the bearing during the install. I've never put grease on the fork/throw-out bearing either. Have I been doing it incorrectly?

As far as the clutch? How many launches are you planning on doing? When I built my 76 K5 as a kid I used a Mcleod clutch kit, had the flywheel and clutch assembly balanced with the engine. Lots of burnouts, launches, and just plan showing off. Never had an issue. Estimate about 450 HP. Lots of fun. I miss my K5.
 

WFO

Full Access Member
Joined
Jan 6, 2017
Posts
3,663
Reaction score
4,989
Location
Texas Panhandle
First Name
Dan
Truck Year
1986
Truck Model
K20
Engine Size
350
That throw out bearing just needs to be slid to the center.
I'd be more worried about that glob of grease slinging onto the clutch plate.
 

Chris H

Junior Member
Joined
Aug 22, 2019
Posts
20
Reaction score
2
Location
Montana
First Name
Chris
Truck Year
1979
Truck Model
K2500
Engine Size
468
I've always thought that it just "floats" in the center over the fingers. The 2 clips were just there to hold the bearing during the install. I've never put grease on the fork/throw-out bearing either. Have I been doing it incorrectly?

As far as the clutch? How many launches are you planning on doing? When I built my 76 K5 as a kid I used a Mcleod clutch kit, had the flywheel and clutch assembly balanced with the engine. Lots of burnouts, launches, and just plan showing off. Never had an issue. Estimate about 450 HP. Lots of fun. I miss my K5.
I got a centerforce clutch that is supposed to handle more than stock power. Figured around 425hp. Said to grease area on for where bearing goes. I have too much. Lol. Will wipe most off. Says good for street and strip. Good grip for some dragging. Mine is a beast with 4/11's so more pulling than racing. Was slipping before I think so looking forward on how it does after break in period.
 

Forum statistics

Threads
43,936
Posts
946,048
Members
35,982
Latest member
jake26104
Top