4WDKC
Full Access Member
- Joined
- Jan 27, 2016
- Posts
- 2,366
- Reaction score
- 1,090
- Location
- Southern Florida
- First Name
- Kacy
- Truck Year
- 1987
- Truck Model
- V10
- Engine Size
- 350
Is it a law or something that all 1 tons must have these lights?
Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.
I know here in California if a vehicle is over 80" wide, vehicles are required to have clearance lamps. I think the only thing on my K30 SRW that I think triggers the requirement is the D60 is wider than the 10 bolts in the 1/2 and 3/4 tons.
The front hubs on the d60 stick out considerably farther than the front axles on the 10 and 20 series trucks. If, that is what they measure from, it's possible. I know we've had the discussion about lights on the tailgate being triggered by vehicle width, but it my have more to do with local laws than anything. My D30 doesn't have clearance lights, but it is also ex-military.If its SRW shouldn't it be same width as the 1/2 and 3/4 ton?
The front hubs on the d60 stick out considerably farther than the front axles on the 10 and 20 series trucks. If, that is what they measure from, it's possible. I know we've had the discussion about lights on the tailgate being triggered by vehicle width, but it my have more to do with local laws than anything. My D30 doesn't have clearance lights, but it is also ex-military.
Who wants a set with harness? Lol
Not a fan either I’m thinking by having those ginormous mirrors on the “1ton” it makes the lights nessesary. My CC had normal mirrors do to a door swapI dislike them and why I have a hard time finding cc trucks I want
Not a fan either I’m thinking by having those ginormous mirrors on the “1ton” it makes the lights nessesary. My CC had normal mirrors do to a door swap
I found on this 89 that the roof skin was different and had molded pockets and nutsert made into the outer layer of the roof and thick rubber seals to combat ingress of water. I always assumed the just ran screws into the skin lolHave seen them on SRW with regular mirrors, I dont like the look and dont want to have to deal with rust from them leaking.
Im sure any that didnt come with them from the factory are done that way.I found on this 89 that the roof skin was different and had molded pockets and nutsert made into the outer layer of the roof and thick rubber seals to combat ingress of water. I always assumed the just ran screws into the skin lol
Oh yeah built in sprinkler systemIm sure any that didnt come with them from the factory are done that way.
I found on this 89 that the roof skin was different and had molded pockets and nutsert made into the outer layer of the roof and thick rubber seals to combat ingress of water. I always assumed the just ran screws into the skin lol
The d60 didnt come in every 1 ton seems like those lights are on every 1 ton.
Me Me Me! LolWho wants a set with harness? Lol