Aftermarket Cam for stock 350

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Marcus

Full Access Member
Joined
Mar 18, 2019
Posts
89
Reaction score
12
Location
Gans, Ok
First Name
Marcus
Truck Year
1985
Truck Model
GMC K1500
Engine Size
305
Have a fully stock 350 4 bolt main. Looking into buying a rebuild kit that comes with a stage 2 cam. Curious on what everyone thinks about the stage 2 cam in a stock 350 4 bolt main. I’m not looking to get 400hp or anything crazy. Just a little something to put some ump into it. What do y’all suggest?
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,092
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
Thank you for submitting your question.
I suggest you give us more info regarding your needs, equipment and ****, heads, gear ratios.
 

ali_c20

Full Access Member
Joined
Sep 20, 2016
Posts
1,255
Reaction score
1,791
Location
Austria
First Name
Alexander
Truck Year
1974, 1979
Truck Model
C20, K5
Engine Size
350, 350
Depends on what you want to achieve: low end torque? More horsepower at high rpms? Choppy idle?
 

Marcus

Full Access Member
Joined
Mar 18, 2019
Posts
89
Reaction score
12
Location
Gans, Ok
First Name
Marcus
Truck Year
1985
Truck Model
GMC K1500
Engine Size
305
1985 GMC K1500 with 3.42 gears. Everything is bone stock. Only thing I’m gonna do to it is take all the smog crap off. Take apart and rebuild it with all new gaskets, pistons, rings, cam, timing chain, freeze plugs, etc etc. I just want a little more hp and a deeper growl. Something to wake the weak low hp engine up a little
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,092
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
1985 GMC K1500 with 3.42 gears. Everything is bone stock. Only thing I’m gonna do to it is take all the smog crap off. Take apart and rebuild it with all new gaskets, pistons, rings, cam, timing chain, freeze plugs, etc etc. I just want a little more hp and a deeper growl. Something to wake the weak low hp engine up a little
Sadly there is little that can be done with the smogger heads.
If you're putting in new pistons you can certainly raise compression. Nothing crazy requiring high test, but a step above stock.
If your bottom end is rouge and the crank needs to be reground, you might consider a stroker engine kit.

Do you have an engine builder close by?
 

Dave 84

Full Access Member
Joined
May 20, 2019
Posts
88
Reaction score
27
Location
Arizona, glendale
First Name
Dave
Truck Year
1984
Truck Model
K5
Engine Size
5.7
So I would do a cheap set of flat tops and cam!
 

Marcus

Full Access Member
Joined
Mar 18, 2019
Posts
89
Reaction score
12
Location
Gans, Ok
First Name
Marcus
Truck Year
1985
Truck Model
GMC K1500
Engine Size
305
I know of very reliable engine guy 10 miles from here. I’m know I’m taking the heads and crank to him. The engine is not the factory engine for this truck. It originally came in a 1975 Nova police car if that changes anything. I just want it to run good, breathe good, and bump a little hp and tq. Nothing crazy.
 

Marcus

Full Access Member
Joined
Mar 18, 2019
Posts
89
Reaction score
12
Location
Gans, Ok
First Name
Marcus
Truck Year
1985
Truck Model
GMC K1500
Engine Size
305
This is the kit I have been eyeballing. Just don’t know quite enough about all of the specific parts and numbers.

You must be registered for see images attach
 

Marcus

Full Access Member
Joined
Mar 18, 2019
Posts
89
Reaction score
12
Location
Gans, Ok
First Name
Marcus
Truck Year
1985
Truck Model
GMC K1500
Engine Size
305
Still trying to figure this out. Any thoughts on this kit? Should I get something else?
 

shiftpro

Full Access Member
Joined
Aug 31, 2012
Posts
4,855
Reaction score
6,092
Location
BC Canada
First Name
shiftpro
Truck Year
73-87
Truck Model
1500, 2500, 3500
Engine Size
350, 383, 454, 496!
I know of very reliable engine guy 10 miles from here. I’m know I’m taking the heads and crank to him. The engine is not the factory engine for this truck. It originally came in a 1975 Nova police car if that changes anything. I just want it to run good, breathe good, and bump a little hp and tq. Nothing crazy.

Oh well you have a great start. I was wondering because you mentioned you had a 4 bolt block... which I don't think you would see on an '85 smogger engine.

If you're springing for new pistons you will be taking the block to your engine guy too. You'll also want your block hot tubbed and scrubbed and your engine builder SHOULD be able to do this for you.

If you're going this far including getting the crank reground, I would seriously consider a stroker engine kit with the bigger crank.
 

Marcus

Full Access Member
Joined
Mar 18, 2019
Posts
89
Reaction score
12
Location
Gans, Ok
First Name
Marcus
Truck Year
1985
Truck Model
GMC K1500
Engine Size
305
I know that I should send the block off to have everything done but I don’t have the $$ to do everything from inside out top to bottom.
 

Marcus

Full Access Member
Joined
Mar 18, 2019
Posts
89
Reaction score
12
Location
Gans, Ok
First Name
Marcus
Truck Year
1985
Truck Model
GMC K1500
Engine Size
305
Oh well you have a great start. I was wondering because you mentioned you had a 4 bolt block... which I don't think you would see on an '85 smogger engine.

If you're springing for new pistons you will be taking the block to your engine guy too. You'll also want your block hot tubbed and scrubbed and your engine builder SHOULD be able to do this for you.

If you're going this far including getting the crank reground, I would seriously consider a stroker engine kit with the bigger crank.


Well I’m trying to do this on a budget to have a running engine that doesn’t leak, lack power, or have smog crap on it for now. I know for a fact that the block is solid but what is unknown is the cylinder walls and rings. Just trying to do everything right as possible on a budget. Hard thing to do these days
 

Oaasport

Member
Joined
Mar 9, 2019
Posts
48
Reaction score
35
Location
Arizona
First Name
Justin
Truck Year
1987
Truck Model
Suburban V10
Engine Size
5.7
@Marcus how much is your budget? This will allow us to further help you with getting some more go. Headers, exhaust, intake manifold can add a little power and give you that growl you want. It all comes down to budget.
 

Marcus

Full Access Member
Joined
Mar 18, 2019
Posts
89
Reaction score
12
Location
Gans, Ok
First Name
Marcus
Truck Year
1985
Truck Model
GMC K1500
Engine Size
305
My budget is like $600. The engine runs. Just has oil everywhere which I’ve cleaned the outside really well. Just want it running for now but I want a better cam in it cause it doesn’t have a lot of hp. There’s been no loss of compression at all. Just not quite enough hp and growl to it.
 

Forum statistics

Threads
43,936
Posts
946,047
Members
35,982
Latest member
jake26104
Top