Search results

  1. miky2295

    Vin tag on the frame

    Just want to know if the frame is Vin tagged. Found short bed truck with no titles for 500$ and need the frame. Would like to know if and where it's marked
  2. miky2295

    Anyone running 20x9 with 275's in the front

    Thank you. If you could find out the measurements that would be great
  3. miky2295

    Anyone running 20x9 with 275's in the front

    Was more worried about the front rubbing at 9in wide.i know you can run a wide tire out back just done want the front rubbing on turns. Thank you for the info I'll look into the calculator sites
  4. miky2295

    Anyone running 20x9 with 275's in the front

    I wanted to know if anyone was running this size on a sb and what the back spacing was
  5. miky2295

    Anyone running 20x9 with 275's in the front

    I'm looking into wheels in the near future and would like a wider tire on the front also. I'd like to do 20x9 front and rear or possibly 20x10 in the rear
  6. miky2295

    Fuel filter vapor lock

    I think it's a vapor lock after the pump. So the fuel goes to the return line instead of up to the carb. I put 2 new pumps on it and they both did the same thing
  7. miky2295

    Fuel filter vapor lock

    The truck had a clear plastic fuel filter I replaced it with a glass one so I can still see the flow. The truck will not restart when it dies and does not have any fuel in the filter. Tried a hose into a gas can and still wouldn't pick up fuel. There hoses I replaced I ran them the same way they...
  8. miky2295

    Fuel filter vapor lock

    On my 86 c1500 I was having a fuel issue last year. I replaced the fuel pump (mechanical), all the rubber fuel lines, gas tank and sending unit nothing worked. Finally I replaced the fuel filter and it was a lot better. The problem is when it's first started the fuel filter is half full and as...
  9. miky2295

    Should I cut more coil?

    I think they are 1/2 ton springs.2 owners before me used it to tow his race car trailer with it and the lady I bought it off of had someone put different springs in the rear that's how I ended up with the 56in springs jammed into the 52 in location. It ride so bad the rest shackles were...
  10. miky2295

    Should I cut more coil?

    Forgot about the possibility of air shocks guess I would need shock extender brackets also. Didn't want to do bags at this point. If I was going to bag it I'd of wanted to do a 4 link
  11. miky2295

    Should I cut more coil?

    Big block is tempting. I have a few different ideas in mind for the future of this truck
  12. miky2295

    Should I cut more coil?

    In the spring it's gonna get another 350 put in. The current one is with out and has low oil pressure after that was planning on a set of 20's so I'd like it to sit level or slight rake forward
  13. miky2295

    Should I cut more coil?

    Technically shining the back would lower it
  14. miky2295

    Should I cut more coil?

    Also think it ended up lowering the back around 7-8in
  15. miky2295

    Should I cut more coil?

    The truck had 56in springs on it in the 52in hanger location(i moved the hanger to the correct location) and figured it might give me a slightly smoother ride. Might still have use it as an actual truck from time to time. I still have to clean the hitch up and paint it
  16. miky2295

    Should I cut more coil?

    I'm getting it aligned this week didn't want to get it done twice. Thought about aligning it and if it was still to high cut half coil off in the spring and realign
  17. miky2295

    Should I cut more coil?

    Just got finished lowering my truck. I installed front drop spindles, cut 1 coil of the front, flip kit with c notch, and new rear 56in springs 6 leafpack(were 52's). When I put the bed on the rocker in the front measured 1/2 in lower than the rear but to me the front looks high. Was wondering...
  18. miky2295

    Headers?

    Looked in to the Patriot headers if they fit like shown in the other thread that is what I'm looking for.
  19. miky2295

    Headers?

    I did find your other thread but I couldn't find a thread that was specially sbc. All the info is help though
  20. miky2295

    Headers?

    Would like to get a set of headers for my 86 c1500 but all the ones I've found hang below the frame rails. My truck has a 350 and just lowered it. The exhaust on it now have is low and will replace it in the spring when I put another engine in. Just want to know if anyone knows which brand or...
  21. miky2295

    63-72 C10 frame dimensions

    I know this is a squarebody forum but I'm in need of frame rail repair patches for my 86 c1500 and can't find any. I did find frame stiffeners for 63-72 trucks and need to know the distance between the top and bottom of the rails. Also need the width of the rail. If I can't I'll have to get...
  22. miky2295

    c-notch?

    Thank you I'll measure tomorrow
  23. miky2295

    c-notch?

    Do you need to c-notch the frame when you do an axle flip kit?
  24. miky2295

    leaf springs to long

    thank you I'll look in a bit I knew there were 2 different lengths but did not know the visual difference. Right now I think they measure 54" eye to eye
  25. miky2295

    leaf springs to long

    New to the group here. have a question about the rear leaf springs on my 86 sierra 1500 2w. Sitting on the ground unloaded the rear shackle is all the way back and maxed out. what is the correct leaf spring length for my truck?

Latest posts

Forum statistics

Threads
42,160
Posts
910,362
Members
33,658
Latest member
87POPS
Top