What have you done to your square lately??

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Drauka99

Full Access Member
Joined
Apr 24, 2023
Posts
69
Reaction score
139
Location
Northwest Florida, USA
First Name
David
Truck Year
1981
Truck Model
C-10
Engine Size
6.0 LQ4
I started body work a few weeks ago. Yesterday I put a door I had bought on the stand to get cleaned up. It looked great other than some chipped paint. I pulled the molding off and lo and behold a 1/4 inch thick chunk of bonding came with it. The previous owner had bondo over the rust under the original trim and it was a solid 3/8” thick in some places. In no world did the repairs they did need that much fill. I got it back to bare metal and began a more reasonable repair.
I looked at the bed that I got that came off the same truck.... the back corner below the taillight has a "new" body line on one side. LOL at least I am prepared this time. The door was supposed to be a "quick" clean up the flaking paint and get prepped for eventually painting the truck. I'm glad I got theses parts for a really reasonable price.
 

1lejohn

Full Access Member
Joined
May 14, 2012
Posts
201
Reaction score
390
Location
texas
First Name
john
Truck Year
1985 , 2004
Truck Model
k-1500, 2500 HD
Engine Size
350, 6.7
Replaced the rear driveshaft U-joints. I had to melt out the plastic locks from the old ones. I'm thinking they were from 85.:oops:
I have the one-piece shaft. I used the C-clamp from My Maddax ball joint kit and a Dewalt impact to remove and install the joints. There was still grease in the old ones. Now on to the front shaft.
 

Attachments

  • heavy duty.jpg
    heavy duty.jpg
    127.5 KB · Views: 17
  • shaft.jpg
    shaft.jpg
    154.7 KB · Views: 15

Travlr

Full Access Member
Joined
Sep 18, 2023
Posts
182
Reaction score
547
Location
Central Utah
First Name
C
Truck Year
1978
Truck Model
K20 Camper Special
Engine Size
350
Replaced the rear driveshaft U-joints. I had to melt out the plastic locks from the old ones. I'm thinking they were from 85.:oops:
I have the one-piece shaft. I used the C-clamp from My Maddax ball joint kit and a Dewalt impact to remove and install the joints. There was still grease in the old ones. Now on to the front shaft.
I like the original u-joints. They last a lot longer than joints you have to grease every so often. Why people like joints they need to grease is beyond me.
 

perky

Junior Member
Joined
Mar 17, 2023
Posts
24
Reaction score
97
Location
Eastern Washington
First Name
Perky
Truck Year
1978
Truck Model
C20
Engine Size
V8
Built a center console with cup holders. Didn't like the look of other aftermarket ones, so I made my own. Should match that carpet once I finally buck up and buy some lol. Pretty happy with it, single cabs need all the useful storage they can get.
You must be registered for see images attach
 

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
925
Reaction score
2,636
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
Changed the oil today. After some reading, the closest affordable synthetic alternative to 20w50 VR-1 is Mobil 1 15w50. High ZDDP content (more than 1300ppm Zinc and Phosphorus) and reasonably priced at O’Reillys- 30% discount for 6 quarts or more. Used a K&N Gold filter as well.
 

82sbshortbed

Fuckemall!!
Joined
Mar 1, 2018
Posts
14,881
Reaction score
49,331
Location
SE Texas
First Name
Doug
Truck Year
1982, 1984
Truck Model
1500 shortbed, 1500 longbed
Engine Size
454, 305
I just bought 2 quarts of 10w-30 mobile oil for the generator. Over 10 bucks each at advanced auto. Wtf?
 

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
2,741
Reaction score
8,880
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
I filled up my one lazy rear tire this morning, noticed it was near flat when I came in
 

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
2,741
Reaction score
8,880
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
Changed the oil today. After some reading, the closest affordable synthetic alternative to 20w50 VR-1 is Mobil 1 15w50. High ZDDP content (more than 1300ppm Zinc and Phosphorus) and reasonably priced at O’Reillys- 30% discount for 6 quarts or more. Used a K&N Gold filter as well.
Curious why you run such high dollar oil? Not being a dick, genuinely curious cuz I don't remember the details on your motor. I've always run Rotella 15W40 in my small blocks cuz it has all those good vitamins and minerals without the expense of the fancy stuff
 

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
925
Reaction score
2,636
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
Curious why you run such high dollar oil? Not being a dick, genuinely curious cuz I don't remember the details on your motor. I've always run Rotella 15W40 in my small blocks cuz it has all those good vitamins and minerals without the expense of the fancy stuff
Great question, and I don’t take it that way at all. Mostly it’s because it has all the red white and blue colors on it and checkered flags and stuff, the Mobil even says NASCAR on it.

No, it’s because I’m extremely distrustful of the “rebuild “ after driving it. It runs low oil pressure sub 30 in warm weather with 10/40 in it. I didn’t rebuild it, I bought it this way. But I don’t know how much attention to detail it had on the bottom end and suspect more bearing clearance than should be. So, I’m going with thicker/more expensive oil. Not expecting anyone to agree, but it’s what I’m doing.
 

TotalyHucked

Full Access Member
Joined
Feb 24, 2020
Posts
2,741
Reaction score
8,880
Location
Auburn, Georgia
First Name
Zach
Truck Year
1985
Truck Model
Sierra 1500
Engine Size
5.3
Great question, and I don’t take it that way at all. Mostly it’s because it has all the red white and blue colors on it and checkered flags and stuff, the Mobil even says NASCAR on it.

No, it’s because I’m extremely distrustful of the “rebuild “ after driving it. It runs low oil pressure sub 30 in warm weather with 10/40 in it. I didn’t rebuild it, I bought it this way. But I don’t know how much attention to detail it had on the bottom end and suspect more bearing clearance than should be. So, I’m going with thicker/more expensive oil. Not expecting anyone to agree, but it’s what I’m doing.
Ahhh, makes sense. Definitely worth a few extra dollars at each change to not hurt it until you're ready to rebuild/replace
 

ChuckN

Full Access Member
Joined
Nov 8, 2022
Posts
925
Reaction score
2,636
Location
Bellinham, WA
First Name
Chad
Truck Year
1981
Truck Model
C10
Engine Size
350
Ahhh, makes sense. Definitely worth a few extra dollars at each change to not hurt it until you're ready to rebuild/replace
Yeah, that’s the plan- I’d like to keep it going for around five years, until I can get the bodywork done and then the plan after that would be a big block and maybe something like a Gearstar transmission.
 

Travlr

Full Access Member
Joined
Sep 18, 2023
Posts
182
Reaction score
547
Location
Central Utah
First Name
C
Truck Year
1978
Truck Model
K20 Camper Special
Engine Size
350
Its the price you pay when you have an anti oil administration in the White House.
Hate to tell you this Buddy... but anti or pro, oil prices are going to rise. The Saudi's are in control of the world market regardless of who's in the White House.
 

sidschev

Full Access Member
Joined
Oct 2, 2023
Posts
279
Reaction score
495
Location
Arkansas
First Name
sidney
Truck Year
1984
Truck Model
c1500
Engine Size
350
Hate to tell you this Buddy... but anti or pro, oil prices are going to rise. The Saudi's are in control of the world market regardless of who's in the White House.
not true well maybe a bit... but if the F32432King liberals would let them pumps run we have much cheaper fuel and that pipe line as well......................we have enough oil here to not buy from sand people.............................
 

Forum statistics

Threads
42,140
Posts
910,027
Members
33,642
Latest member
Bhardiman1
Top