Latest activity
-
ATaylor beat me to it- and now Derek- Master cylinders are not all the same, some have the large chamber in the front, some rear, some...
-
AuroraGirl replied to the thread Rear Brakes Locking Up.I Think the trucks with combination valves which have the bypass are diagnolly split systems, that means it would probably be necessary... -
Radiohead reacted to TotalyHucked's post in the thread What have you done to your square lately?? with
Wow.
Hit a buzzard doing 45-50mph Sunday on my way up to the shop, shattered the hell out of the windshield. Thankfully it hit dead center... -
Thanks DoubleDingo. I made all new steel lines for the truck and routed them the same way as it was when I got it. It might have been...
-
Thanks Blue Ox. The diagram reminded me I bought the tool that temporarily replaces the warning switch for bleeding purposes. It screwed...
-
AIt could be either way. Some of the lighter weight trucks have the front brake reservoir and piston is in the back; heavier chassis...
-
AAndronikos replied to the thread Rear Brakes Locking Up.Thanks DoubleDingo. I made all new steel lines for the truck and routed them the same way as it was when I got it. It might have been...
-
AMaybe mine is wrong, but it is as it came from the factory as far as I know, and the small line is hooked up to the front port of the...
-
AAndronikos replied to the thread Rear Brakes Locking Up.Thanks Blue Ox. The diagram reminded me I bought the tool that temporarily replaces the warning switch for bleeding purposes. It screwed...
-
AFrom the manual: Doesn't provide a lot of answers, but at least you can see what all is in there.
-
legopnuematic reacted to DoubleDingo's post in the thread What have you done to your square lately?? with Like.
It's a tilt column. For a while I had the steering wheel tilted up, and it was harder to turn the key. I don't have a big belly, so I... -
legopnuematic reacted to DoubleDingo's post in the thread What have you done to your square lately?? with Like.
@legopnuematic Speaking of half-broken rack, I had that happen on my Jeep one day at work. Heard this horrendous crackling sound...
-
TI'm the same way, my truck sits ~3/8"-1/2" lower on the pass side front, just cuz I didn't cut the springs the same and have never fixed...
-
legopnuematic replied to the thread Rear Brakes Locking Up.Taylor beat me to it- and now Derek- Master cylinders are not all the same, some have the large chamber in the front, some rear, some...
-
-
geolee reacted to 1STLS1's post in the thread Replacing the TBI engine, suggested upgrades or changes? with Like.
I decided to install a TBI 5.7 LO5 Goodwrench crate motor I pulled from another vehicle in my '87 K10 with a tired 5.0 TBI. It ran and...
