VDO Series 1 3-3/8 inch Gauge

[dragstews]

Wanting to find a used gauge to rob the bezel from it ..

Needs to match the bezel that's on this tach ..

You must be registered for see images attach

Bezel needs to be in good condition, no rust or dents ..

Whatcha got ??
Much thanks

 

[ali_c20]

The part number is VDO 333 355. All bezels of the VDO 333 series 1 should fit.

 

[dragstews]

All bezels of the VDO 333 series 1 should fit.

Thanks ... Good info

As long as it's 3-3/8" O.D. ...

You must be registered for see images attach

I found one, chrome wasn't very good sent it off to have it replated, been months ago ..
Thinking I could find a good one that doesn't need chroming ??

You must be registered for see images attach

Wanting to match the bezel that's on the VDO tach that I'm running ... It's the 333-355 ..

 

[dragstews]

Ran up on one that's listed for sale on Facebook Marketplace ..

You must be registered for see images attach

Fellow got it in with a sack full of other gauges ..
Asking $300 for all ..

Asked if no would sell just that one ??
No answer yet ..
__________________________________

He got back to me ...

Yes Virginia, there is a Santa Claus !!

Here's the deal ..
I subjected doing a trade ..
Had these set back for a rainy day ..

You must be registered for see images attach

Thoughts was at one time putting them on my truck ..
But, really didn't want anything hanging under the dash ..
All the truck's factory gauges work ..

Told him I'd trade the three for his one ..
He jumped on the deal ..
Said the tach was NOS, never used ...

You must be registered for see images attach

 

[dragstews]

Still needing the gauge ..

Don't matter if it works or not as long as the bezel is in good shape ..

 

[dragstews]

Never would I have thought that finding a VDO tach would be this hard to do !

The one I already have been working fine for years on end just got a facelift ...

The factory gauges have a dome lens ...

You must be registered for see images attach

Wanted to have all the gauges to have the same look, found a clock company that offers convex lens in many sizes ..

You must be registered for see images attach

Had to take about .200" off the O.D. in order to fit into a recess of The VDO's bezel ..

You must be registered for see images attach

You must be registered for see images attach

That went super well, attained a matching look to the Oem ..
Now to do the Pontiac vacuum gauge the same way ..

You must be registered for see images attach

If I can find another VDO tach bezel ?

The bezel that you see on the vacuum gauge is in poor shape and requires to be climped on ... Don't want to use it ..
VDO tach bezel is a snap on design, no bending on the lip ..

 

[dragstews]

You must be registered for see images attach