The small, annoying purple(ish) dinosaur… Presenting Barney…

Disclaimer: Links on this page pointing to Amazon, eBay and other sites may include affiliate code. If you click them and make a purchase, we may earn a small commission.

Scruffy49

Full Access Member
Law Enforcement Navy
Joined
Feb 28, 2025
Posts
434
Reaction score
607
Location
Rosemark TN
First Name
Jeff
Truck Year
1985
Truck Model
C10 swb
Engine Size
4.3L
Was my late (died in 2011) brother in law’s last “trucklette”. 1994 2.3L/5spd 2wd, standard cab short bed. Shipped with the “deer track” 14” alloys, I normally ran 1992 Sport alloys, Outlaw 2 clones.

Being a 5x4.5” bolt pattern, opens up back to the 1930s for wheel choices. That crust bucket is an original 1978 Lil Red Express 15x7, and I have all 4… They were on the 69 D100 (green junker) at purchase in Sept 2004. And so was that LT235/75r15… :)
 

Attachments

  • 65879000479__FFA82D37-272D-4B6F-8250-AC366FC6429E.jpeg
    65879000479__FFA82D37-272D-4B6F-8250-AC366FC6429E.jpeg
    235.7 KB · Views: 10
  • IMG_2929.jpeg
    IMG_2929.jpeg
    200.3 KB · Views: 9

Scruffy49

Full Access Member
Law Enforcement Navy
Joined
Feb 28, 2025
Posts
434
Reaction score
607
Location
Rosemark TN
First Name
Jeff
Truck Year
1985
Truck Model
C10 swb
Engine Size
4.3L
No idea what this wheel orinally fit, as Lisa’s parents and brother had Ford cars, Danger Rangers, campers, etc. It fits for now. The Lil Red Express wheels will be cleaned up for my 1949 Dodge.

30” or so front ground clearance on those height adjustable ramps. Have to pull the transmission, for a full clutch job. Disc, pressure plate, master/slave/line, pilot bearing, resurface the flywheel…

Sitting since 2017. Engine turns over fine, in tank fuel pump is deceased.
 

Attachments

  • IMG_6808.jpeg
    IMG_6808.jpeg
    288.7 KB · Views: 5
  • IMG_6809.jpeg
    IMG_6809.jpeg
    258.6 KB · Views: 5
  • IMG_6810.jpeg
    IMG_6810.jpeg
    133.7 KB · Views: 5
Last edited:

Scruffy49

Full Access Member
Law Enforcement Navy
Joined
Feb 28, 2025
Posts
434
Reaction score
607
Location
Rosemark TN
First Name
Jeff
Truck Year
1985
Truck Model
C10 swb
Engine Size
4.3L
Still working on Ralph, waiting for more parts to arrive.
Still working on Whiskey Bent, the 99 K3500 c&c standard cab dually. Need to cut the rear support welds and pull the flatbed, tbi pump swap the front tank for the carburetor conversion. If you ever feel the urge to run a Vortec 350… Don’t.
 

Latest posts

Forum statistics

Threads
48,457
Posts
1,068,297
Members
42,885
Latest member
sebasgravel
Top