Door Glass Channel Replacement 1974 K5 Blazer

[Kurnacopia]

I recently broke the Glass Channel on the drivers side window of my 74 K5. LMC does not stock these and I cannot seem to locate a vendor. Would anyone know where to get a replacement for this particular part? I do see lots of pics on the net but these are all for trucks. The 74 has a full removable top making the door different.

Any help would be greatly appreciated!

 

[Royal Sierra 454]

You might have to order the unit that LMC carries and see if you can make it work? I forgot that your doors are different from my 76? I would start search all CL states/areas. That's one of the things I like the most about the hobby. The search!!!

 

[Snoots]

Use a wire wheel to clean up the broken area and braze it. It'll be good as new.

 

[Kurnacopia]

Snoots your idea of brazing was close to what I did. I soaked my parts and deleted all rust and then used metal rods to stablize a nice mixture of JB Weld. I dont have brazing skills so this is what I could do. Its strong as hell now and I painted all of it to keep the rust out. I then picked up Window Glass Flocked Channel rubber off Amazon:

https://www.amazon.com/dp/B01DE1ZK60/

I used a ruber adhesive and re assembled. Dang thing rolls up and down slicker than snot now.

Thanks everyone for your input. It is very appreciated.

Mike

 

[AyWoSch Motors]

I recently broke the Glass Channel on the drivers side window of my 74 K5. LMC does not stock these and I cannot seem to locate a vendor. Would anyone know where to get a replacement for this particular part? I do see lots of pics on the net but these are all for trucks. The 74 has a full removable top making the door different.

Any help would be greatly appreciated!

I have a set of 75 full vert top blazer doors I was going to throw away. They're in the junk pile. Have all the hardware in them if you still need this.

 

[Kurnacopia]

I have a set of 75 full vert top blazer doors I was going to throw away. They're in the junk pile. Have all the hardware in them if you still need this.

Email me AyWoSch Motors !! I would love to see what you have.

[email protected]

 

[AyWoSch Motors]

Email me AyWoSch Motors !! I would love to see what you have.

[email protected]

My email is a bit funky, but I'll try.

But I'll put them here too.

You must be registered for see images attach

You must be registered for see images attach

 

[Kurnacopia]

So these were in the garbage pile? Its too bad you dont live in AZ, I would take these off your hands. But, i would gladly take the parts inside them. What do we need to do to make this happen?

I really appreciate this as well...so thank you.

 

[AyWoSch Motors]

So these were in the garbage pile? Its too bad you dont live in AZ, I would take these off your hands. But, i would gladly take the parts inside them. What do we need to do to make this happen?

I really appreciate this as well...so thank you.

Well I had planned to gut the parts out first, but yeah, they're junk to me. They're rusty, and I have no use for them on my blazer.

 

[Kurnacopia]

Understood....I will gladly take the inside window channels if they aren't rusted to heck.