#needhelp

  1. I

    Help needed part 1 of 2

    So i posted a couple days ago about my brake switch getting super hot and it never did before so i assume its from my terrible wiring so can anyone tell me if i did this part at least right i assume i did and i think what i messed up is the connections between the two brake lights rather than...
  2. I

    Help needed

    Hey guys i need some help iding what this is and maybe some fixes when in park it is not causing any issues when in drive accelerating it starts to get very hot and shortly after noticing that the truck died and the igntion felt as if the switch blew out no starter or anything a day later i...
  3. Timothy69420

    Replace spark plugs truck runs but dies when it at idle

    I replaced the spark plugs on my 1978 c10, I make sure they were gap correctly to 0.045in and they were the correct plugs which is AC Delco R45TS. Also made sure the leads are in the correct firing order. when replacing them. the truck started when I replaced them, but backfired. second time I...
  4. Jonathan_GMC

    New voltage gauge no work

    So I just purchased a new voltage gauge for my 86' 6.2l, and it is reading in the red just above 8 volts. It does react to key on. (my old one did not hence the reason for replacing) I checked my actual voltage and it is at 14.6 which is plenty good, but my gauge doesn't read above 9 volts. Is...

Latest posts

Forum statistics

Threads
45,930
Posts
996,241
Members
39,126
Latest member
pieceofshift1985
Top