Search results

  1. M

    Adding 4WD, where does the shifter go?

    Hey, Bill, Yes, that's what I've got. A shifter from the correct truck, with the single linkage rod on the bellcrank on the 208. The hard-to-type kkgp81 sent me in the direction of an aftermarket hump, so I found one and got the pictures, so I have an idea of the placement, but I wanted to find...
  2. M

    1984 k10 700r4 won't shift out of 2nd please help!

    Well, truthfully, this transmission is probably never going to see more than 300 hp, so I should be okay with it for a while, but if I do blow this one, my next step is 4L60E. I don't need an 80. We'll see this summer after I put 9:1 pistons and another new cam in my 400, this time a Comp Cams...
  3. M

    700R4 Hard/Delayed 1-2 shift

    Before you try all that just try loosening up the throttle valve cable about 1/8 of an inch and see what happens.
  4. M

    1984 k10 700r4 won't shift out of 2nd please help!

    I just had a nightmare of a time fixing my 700R4. Two years. Two shops. It did the same thing, stopped upshifting, so I took it in, cost $1800 to rebuild it. Then I forgot to torque two of the bolts on one side of the transmission, it came off the block and destroyed the front pump. Another...
  5. M

    Does it matter where this spring connects?

    Well, Ricko is right, mechanically, and from an engineering standpoint, what he describes is exactly how the system should work. Functionally, if you have the spring a little bit off-center, pulling down on the shaft at the same time it pulls the throttle cable forward, then you are exerting...
  6. M

    Adding 4WD, where does the shifter go?

    Oh. Sorry. That information might be helpful. It's a 1985 GMC K2500 frame with a 208C transfer case, and a 1985 Chevy C1500 cab.
  7. M

    Adding 4WD, where does the shifter go?

    Hi guys, I put a two-wheel drive cab on a four-wheel-drive chassis, because the thing caught fire. Now it occurs to me I don't know the exact measurements where to cut a hole in the floor for the four-wheel-drive shift linkage. Can any of you guys help me out? Got dimensions in hand? Take a...
  8. M

    HELP motor mount issue

    Hi guys, I'm new to the forum, I came here to get some help on just this topic. I have an '85 four-wheel-drive frame I'm putting a '99 5.7 L Vortec into, and I confused myself at first because the motor mounts wouldn't fit, so I thought maybe it was a 454 mounting problem, which is where the cab...

Latest posts

Forum statistics

Threads
42,243
Posts
911,997
Members
33,746
Latest member
lepak
Top