Search results

  1. greatlakes08

    Steering Improvement Suggestions

    Thanks I will check that as well.
  2. greatlakes08

    Steering Improvement Suggestions

    Thanks very much. I did go out and look and see if there were an obvious cracks but didn't find any. I am definitely going to order the brace though to avoid future issues even if it doesn't do much for the steering it will be worth it.
  3. greatlakes08

    Steering Improvement Suggestions

    I will try this method and see what it looks like. I also will get it aligned again. I think Im expecting too much out of it as well with the oversize mud tires...I don't want to keep throwing parts at her expecting something thats never going to happen...
  4. greatlakes08

    Steering Improvement Suggestions

    John, Thanks for confirming my suspicions about the drop pitman arm situation. Was your steering shaft loose at all before you replaced it? I had someone get in and turn the wheel all the way to lock in both directions while I watched the shaft and shaft/gear box connection. I also had both...
  5. greatlakes08

    Steering Improvement Suggestions

    Thanks very much! I was going to replace the steering shaft but my rag joint looks good and everything is very tight so I don't see the point at the moment.... The steering box brace is the one...https://www.offroaddesign.com/bolt-in-steering-box-brace-for-81-91-gm-4wd-trucks.html and like you...
  6. greatlakes08

    Steering Improvement Suggestions

    I will start off by saying that this is a daily driver and will have minimal offroad use. I purchased this burb out in California and it seems like the previous owner installed the lift (4" according to previous owner) mainly for looks which I also like. There are 5.5" blocks in the rear. The...
  7. greatlakes08

    Retrofit AC upgrade results

    Thank you very much!
  8. greatlakes08

    Retrofit AC upgrade results

    Ive got a 1991 Suburban with rear air. Currently it has been converted with the original compressor still working but its not cooling like I want it to. I would like to do as few mods as possible to the truck in order to achieve cooler air. Can you tell me which compressor you used and where you...
  9. greatlakes08

    Fuel sending units

    When I ordered my sending unit in description it mentioned the size of my tank. When I looked at other sending units not specific to my vehicle they mention different volumes based on what vehicle they are for. When I pulled the sending unit out that was in my tank I looked up the part number...
  10. greatlakes08

    Fuel sending units

    I just installed a new sending unit and fuel pump on my suburban. Make sure the sending unit you get is calibrated for the correct tank size you have otherwise it won't read correctly on your gauge. I purchased my sending unit from Oreillys (Precision Brand) and I purchased my pump from Autozone...
  11. greatlakes08

    Arm rest removal ?

    I have a 91' V1500 with bucket seats and dual arm rests on each seat. I had to force the fabric forward and pull it off the arm rest then I could access the bolt to remove the arm rest frame from the seat. The zipper would have been nice. Anyone know what size foam to use?

Latest posts

Forum statistics

Threads
42,156
Posts
910,225
Members
33,649
Latest member
MikeD
Top