Search results

  1. Zayshley

    400 SBC Build

    Looking to rebuild the original 400 SBC out of my '76 K15 and looking for some suggestions for what I should do. I have a XE262H cam I plan on putting in it. I also plan on getting a set of 062 vortec heads, some flat-top pistons, and other goodies but not exactly sure what else I should do to...
  2. Zayshley

    15x10 Steelies

    Do you have a link for them? Those look really good.
  3. Zayshley

    “Clacking” noise at low speeds and Bad Vibration at 80km/h that goes away at 108km/h.

    Been having this issue for a while and I’m not quite sure what it is. Originally thought it was a bad rotor since it’d slow up at a certain point when rotating through the caliper but after replacing it, and the wheel bearings up front, the noise and vibration is still there. Not sure if it...
  4. Zayshley

    15x10 Steelies

    I was thinking of getting some Super Singles as well but it’d be a hassle to get them shipped up here since I’m in Canada. I’m just trying to find an excuse to hit the buy button on the steelies. They’re only $1150 CAD compared to a set of 15x12 Super Singles which would cost around $2500 USD +...
  5. Zayshley

    15x10 Steelies

    My truck before I put the centerlines on:
  6. Zayshley

    15x10 Steelies

    On the fence about ordering a set of 15x10 Steelies off Coker Tire (about $1200 CAD + finding hubcaps). Currently running a set of 16x10 Centerline Pro Convo’s on 315/75r16’s but I also love the look of the 15x10 steelies. Any opinions? My truck vs what I’m thinking of doing:
  7. Zayshley

    Fair price for a 4x4 TH350?

    I have a TH350 (no torque converter + unknown km) from a ‘80 Blazer that came with a NP205, was told it was working perfect before it was pulled out. Just wondering what’s a fair price to ask for it. ($CAD)
  8. Zayshley

    15x10 Centerline Apaches

    I love them too but my ultimate dream is to get some 15x12 or 15x14 Welds (Super Singles or SR28’s) but chances are next to nothing for finding them up here. Probably not gonna end up getting the centerlines as they’re not worth the effort required to get them.
  9. Zayshley

    15x10 Centerline Apaches

    Already threw him a $300 CAD offer but he wouldn’t take that. $400 + a 6 hour round trip for them doesn’t seem worth it.
  10. Zayshley

    15x10 Centerline Apaches

    Seems to be the consensus. I didn’t know they did, I’ll have to take a look at that.
  11. Zayshley

    15x10 Centerline Apaches

    Guy here is selling some 15x10 Centerline Apaches, equivalent to Weld Roadhawks, for $400. Wanting to get some second opinions on if I should get them for my truck or not (second picture).
  12. Zayshley

    MY 1976 GMC ROYAL SIERRA 15 SHORT BED WITH A 454 SPRIT OF 76

  13. Zayshley

    Highback Bucket Seats

    Bought these a while ago to put into my truck but changed my mind. Just wondering what a fair price to ask for them would be. One small tear on both seats but otherwise in perfect condition.
    • Zayshley
    • Thread
    • #red buckets
    • Replies: 7
    • Forum: Seats
  14. Zayshley

    Will a shortened 2wd driveshaft work behind a slip yoke np205?

    Is it possible to just use a shortened 2wd driveshaft over the normal "4x4" np205 slip yoke driveshaft?
  15. Zayshley

    '76 K1500 NP203 to NP205 swap

    Alright. The rear driveshaft needs to have a slip yoke since its an '80 transfer case unlike the older ones with a fixed yoke so I need to get a new shaft with one.
  16. Zayshley

    '76 K1500 NP203 to NP205 swap

    My truck, 1976 GMC K1500, has the same set-up, 400sbc with a th350. It has the adapter and shifter, but im not sure what modification im suppose to do to the shifter. I've read that it would be a good idea to just do a twin stick set-up but idk if I wanna do that. The NP205 came with the th350...
  17. Zayshley

    '76 K1500 NP203 to NP205 swap

    I just recently bought a NP205, that was bolted to a 400/th350 in a '80 Blazer, that I plan in putting in my truck to replace the beat NP203 which has the locking hubs conversion kit. Besides drive shafts, is there anything else I need to make it work?

Latest posts

Forum statistics

Threads
42,185
Posts
910,917
Members
33,678
Latest member
tnahaus
Top