Search results

  1. Doppleganger

    Power window motor?

    Sounds like it. Just curious....have you added any relays at all?
  2. Doppleganger

    Finding Serpentine Belt Lengths

    I have an original AC Delco serpentine belt kit for my motor but with all the customizing, etc. its too short. I ran a cloth measuring tape on the pulleys and found it to be almost 4" longer than the 'original' (this with the tensioner fully retracted). Question I have is: do you measure the...
  3. Doppleganger

    What new tools have you got lately?

    Built one of these setups - some have probably seen it online. FWIW...any vids you see on this setup, pay no attention to their measurements as your shop vac is probably different. Idea is the dust 'cyclone' swirls the debris around, with air being light - it passes on while the particles drop...
  4. Doppleganger

    What new tools have you got lately?

    Local hardware still carries Irwin (USA) taps and thread dies. I buy them 1-2 at a time. They hold up quite well. Like most of everything they sell, the HF junk I dont even consider.
  5. Doppleganger

    A couple more sensor questions

    Heckuva an idea. :hat:
  6. Doppleganger

    Brights pop fuse

    Did the Painless setup involve relays at all? Thats how mine are going in regardless.
  7. Doppleganger

    Ignition Resistance Wire-Needed or Nah

    You fellas know more about it than me, but I'm a huge fan of relays and surprised they aren't discussed more with trucks that had few to none - especially after we mod them. I worked on cars for years that loved to dump 2-3 25A+ circuits on a single 30A relay and then talk about its...
  8. Doppleganger

    Newbie from France

  9. Doppleganger

    Header Gaskets

    So I call Summit - they ask me what I'm working on. I tell them I'm looking to buy a decent set of header gaskets for a SBC. Before I can tell them the PN I looked up, guy suggests....Remflex. lol So I ordered the Remflex header and collector gaskets yesterday. They are out for delivery today...
  10. Doppleganger

    Header Gaskets

    Got ready to install my headers and realized the gaskets I had were some cheap fiber ones that came with the headers. Was wondering what you fellas used that worked. Fel-pro? Copper? etc. I have Edelbrock E-Tec (vortec style) heads and anything I saw that looked interesting never mentioned...
  11. Doppleganger

    What brake lines to get for lifted c10

    Found them. Here's what I ordered: https://www.inlinetube.com/products/ct1018 I used the rear line but the fronts were too long. They are braided stainless and measure 25" long. If you have any use for them, shoot me an offer.
  12. Doppleganger

    factory bumper carriage bolts?

    I went to the hardware and got the same looking carriage bolts only in stainless. Then I polished the heads on a wheel into a mirror like reflection. I think they look better than the bumper (currently). lol
  13. Doppleganger

    What brake lines to get for lifted c10

    I got a set from Inline Tube - was for a 4-6" lift and too long for my use.
  14. Doppleganger

    What are you using to paint wing window frames

    I'd go with a satin - had mine powder coated (satin black).
  15. Doppleganger

    What have you done to your square lately??

    Messing with peripherals until its warm enough out to paint. Finally got all the new parking brake cables installed. Once in, they rubbed against one of my rear sway brackets, so modded a couple of insulated cable straps and made it so the cables wont touch anything. Next up is finishing the...
  16. Doppleganger

    Hello from Indiana!

  17. Doppleganger

    Best media for blasting the body

    Fella I use will do everything but the roof with regular sand (turns the pressure down) but prefers walnut shells. Did mine - gotta do it again to get all the zinc-phosphate off.
  18. Doppleganger

    Where to get quadrajet rebuilt?

    Mountain Man Fuel - I read all the car sites and they sing high praises to him - said his specialty is q-jets and they come back ready to bolt on and go. Couple guys with big blocks both said their mileage went crazy good too. https://www.mountainmanfuelsystemsllc.com/ I sent mine there, then...
  19. Doppleganger

    New from TN

  20. Doppleganger

    Vent hose lines

    Ok...makes sense. THANKS :hat:
  21. Doppleganger

    Vent hose lines

    I have 2 hard lines left over at the rail - one goes from the tanks to the canister - anyone know what the other one goes to (one towards the bottom of pic)? THX
  22. Doppleganger

    New member from North Carolina

  23. Doppleganger

    USA1 Industries door panels

    I see LMC as kind of a Walmart - they'll have what you want just dont expect Lloyds of London quality. The USA panels come loaded (whenever they come). The LMC panels are ala cart. Gotta order every trim detail and install them yourself. I did get a dash from USA in under a year - got lucky...
  24. Doppleganger

    Fuel Pump Sending Unit Main Harness

    Here's one of the pics I have of when I pulled the motor and some of the wiring was exposed. The PO must have gotten a great sale on solid core red wire and fudged it everywhere by cutting out chunks of the original harnesses.....so not sure if what I'm looking for was gone when I got it. I know...
  25. Doppleganger

    1985 Scottsdale, finally getting some love.

Latest posts

Forum statistics

Threads
42,259
Posts
912,421
Members
33,761
Latest member
88chevy
Top