Search results

  1. skysurfer

    Lawn/ Garden tractors/ Riding Mowers, Cool Mods and tinkering

    Bought this Husky in '05, has 230 hours on it now. These are essentially the same as the Craftsman riders, but I got this one because of its 15hp Kawasaki V-twin engine. Runs really well. I've replaced the spindle bearings a couple of times, and just recently replaced the spindles themselves...
  2. skysurfer

    Factory power steering cooler? 1991 Suburba

    My '89 V2500 has one. Nothing specific in the rpo codes for it, unless it was bundled in with the "KC4 Cooling system, H.D. engine oil" which is the plate-style oil cooler.
  3. skysurfer

    Spray vs Plastic Bedliner

    I did find a good use for the rattle-can spray liner. I've been using Herculiner to coat the underside of my riding mower's deck to keep it from rusting. I'm not as diligent as I should be after I mow, and the wet clippings often get left under the deck. I bought the mower in '05 and the deck is...
  4. skysurfer

    Spray vs Plastic Bedliner

    I've had both. The plastic drop-in liner did far more damage than it prevented. Dirt and sand gets underneath them where it acts like sandpaper, removing paint, then moisture collects in the dirt causing rust. It did the same thing along the top of the bed rails where the liner wraps over the...
  5. skysurfer

    New door seals, new problems.

    I could barely shut the rear doors on my Suburban after installing new gaskets. That was thirteen years ago and they still require a firm hand to close.
  6. skysurfer

    Harbor Freight Tool/Product Review

    Long Term Update: My HF 8" 3/4 hp bench grinder started making some gawd-awful noises last week and removing the wheels confirmed the noise was coming from within. WTF? I just bought this thing in '88 and it's giving me trouble already?? To be fair, this grinder is old enough that it has the...
  7. skysurfer

    Weird level action contraption on rear brakes

    It adjusts brake pressure according to load. Search LSPV, it’s been covered in quite a few threads.
  8. skysurfer

    350 TBI in California

    Having been a Cali smog equipment compliance inspector at one point in my life, I’d say the chances of a tech noticing the different heads are practically zero. Unless the tech happens to be a hardcore square fanatic, he probably wouldn’t know a Vortec head if you dropped it on his toes. These...
  9. skysurfer

    Clearance Light Location

    I'm not sure what link I posted before but I did some digging and found this thread: https://www.gmsquarebody.com/threads/marker-light-question%E2%80%A6.35559/ and looking around in there I found a written explanation that was posted on another site: As your looking at the roof from the front...
  10. skysurfer

    break qustion

    Load Sensing Proportioning Valve. You can enter LSPV in the search bar and it comes up in quite a few threads. That one looks like it has seen better days and should probably just be bypassed.
  11. skysurfer

    Anyone used the old ash tray for something (else) that's interesting?

    Since this thread has been revived and the original 2013 pic died, I wanted to repost it for continuity. I should mention that nothing has been changed and I use it all the time.
  12. skysurfer

    1984 K30 Chevy Chassis Cab Truck One Owner only 42k Miles - $4,400 (Denver)

    The ad claims 42676 miles but they're counting the tenths. It looks like the odometer has rolled over and actual miles is probably 104267.6 Still low miles, but more like 2.5 times what was claimed.
  13. skysurfer

    What new tools have you got lately?

    A friend passed away and I ended up with a couple of his things. The genny on the left was his, but I don’t need two of them so I’ll probably sell it. The wrench set is just ridiculous. I have no need for wrenches in the 1.5”-2” range, and if I did, I sure as heck wouldn’t be using an open-end...
  14. skysurfer

    I need help and to know what this truck is worth

    Lol, my guess is he's been trying to cut down a tree.
  15. skysurfer

    I need help and to know what this truck is worth

    Looking at the pics, I’d say the real value there is the tree.
  16. skysurfer

    Draw-Tite 41938 Hitch

    My truck came with a Draw-Tite already mounted. I just looked but couldn't find any numbers stamped on it, so I don't know if it's the same as yours. Might be different because this one is on a Suburban, but it does have three bolts on each side. As far as location, they just bolted it down as...
  17. skysurfer

    Truck @ The Garage Anxiety

    I've had to leave my truck at my local mechanic's shop just once or twice. Fortunately, he's also a squarebody owner and gets it. When I asked if my truck would be left out overnight, he immediately replied "No way! We'll roll out one of these Toyotas or something and make room for yours." And...
  18. skysurfer

    8-track player install

    Nobody has mentioned yet how much space a collection of 8-tracks take up in your truck. People today can’t appreciate how easy it is to have thousands of songs at your fingertips compared to listening to the same 10 tapes over and over because they don’t have any more room to spare in the cab...
  19. skysurfer

    Factory 3/4 ton wheel replacement.

    The owner, Frank Mauro Jr, committed suicide in 2011. The business closed but was reopened by new owners sometime later. From what I've read, there's no custom work being done anymore and they don't respond to emails or phone calls. Might as well forget about Stockton Wheel. I hear good things...
  20. skysurfer

    thread size for door lock knobs?

    10-24
  21. skysurfer

    Any value in California emissions air pump stuff

    Does the pump turn by hand? They have a tendency to freeze up when they sit for a long time. Probably of no value if it’s equipment specific to Cali unless you’re willing to Ebay it back to someone who needs it there, but I’d hang on to it anyway. (and I would put the fuel evap system back on)
  22. skysurfer

    WANTED: Automatic Pwr. Brake Pedal Assy.

    If @SquareRoot doesn't have what you're looking for, I have just the vac pedal from my '89. Free, of course.
  23. skysurfer

    Any ideas what this is and why?

    lol, you probably have the Cruise Sentry 1 where, after installing that module, you control the vehicle's speed with your right foot.
  24. skysurfer

    Cowl hood

    I don't think it would work. Besides the center seam being much more pronounced on the cowl hood making it hard to mount, the slope would have the ornament leaning forward at a weird angle. IMO, cowl OR ornament, but not both.
  25. skysurfer

    Quiet muffler recommendations

    Same here. Installed a Dynomax ST when I got the burb 23 years ago. Needed something quiet since any excessive noise comes up right into the passenger area. If it ever wears out I won’t hesitate to get another one.

Latest posts

Forum statistics

Threads
45,954
Posts
996,839
Members
39,153
Latest member
Oliver90_08
Top