Search results

  1. TPISly-C10

    Power window issue on my 88 suburban

    in fact the relay is is just on top of the gaz pedal close to the firewall not easy to remove, i did it on a 88 suburban at the junk yard! ;)
  2. TPISly-C10

    Steering Column Swap

    agree on that! ;) and swap a square column is not that hard! ;)
  3. TPISly-C10

    Synthetic Lubricants

    on my new Yukon gear posi synthetic is not recomand (they give you yukon additive) ;)
  4. TPISly-C10

    Wheel and Tire thread

    ...and now 20x8 245-45-20 front, 20x10 275-40-20 rear! ;)
  5. TPISly-C10

    Wheel and Tire thread

    on rallys: 15x7 225-70-15 in front, custom made 15x9 275-60-15 rear!
  6. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    and then the modifie Astro shaft is in fit perfect in place and the drive is tighter not a big improve since i remove good OEM parts but for those who have wornout part is a big way to go! :) total cost: $40 for 2 used Astro shaft, $20 of welding= $60
  7. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    Bearing was not that bad just a crack on the bushing :) new one is in! ;)
  8. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    lower steering column bearing arrive today now ready to re-install! :)
  9. TPISly-C10

    1981-87 Chevy & GMC Truck 1 Piece Vs. 2 Piece Vent Window Seals

    here my final test with 2 pieces seal vent window kit! :)
  10. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    now the weld and extended tube is done....just whait for the new lower column bearing kit to get here and all go back in place soon :)
  11. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    i think is 95 and up! :)
  12. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    just need a 90 degrees rotation on the upper bracket holder! :)
  13. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    Yes :)
  14. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    while waiting for the pieces to come back from welding, I will do the notch to retain the upper saft to the steering colum base in the right place! :)
  15. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    all fit well only thing bugging me is the upper shaft is too short...yes can be mounted like that but with only one inch inside the lower tube is not very safe to let it run like this, yes you can tack weld it in place..but for me is not enough so I will lengthen the bottom tube 4 inches more...
  16. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    ok everything work fine! moving 90 degrees upper mount was easy! :)
  17. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    now i got to turn the upper collar 90 degrees and this will be ready to fit! :)
  18. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    so easy to remove from those Astro's...and well protected so part is clean and work good! a take one.....and why not 2!! :D price at Kenny U Pull $17 each :D
  19. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    i think i'm gonna go for Astro solution! :D so tomorow its Hunting time! :)
  20. TPISly-C10

    1986 C10- Is it reliable enough for a daily driver?

    1986 C10- Is it reliable enough for a daily driver? yesss :D
  21. TPISly-C10

    RETRO-Mod: Jeep intermediate steering shaft

    my question is: if you don't have big loose on stock rag joint....swapping XJ shaft still worth it (since you can have some loose on upper bushing XJ shaft)? or maybe Astro 2003 ish is a more easy solution? thx :D
  22. TPISly-C10

    1981-87 Chevy & GMC Truck 1 Piece Vs. 2 Piece Vent Window Seals

    the pros on the retro fit one pieces rubber kit is the rubber is not the same outside as the 2 pieces, youv got a exterior seal fitement that is way better than a 2 pieces! hope that post help some one like me to learn this concept! :)
  23. TPISly-C10

    1981-87 Chevy & GMC Truck 1 Piece Vs. 2 Piece Vent Window Seals

    if i had to do all over again i choose a 2 pieces rubber seal set on a 2 pieces vent set but that will be fine! ;)
  24. TPISly-C10

    1981-87 Chevy & GMC Truck 1 Piece Vs. 2 Piece Vent Window Seals

    for the vent window glass frame not a perfect fit too but better than the old rusty 34 years old OEM! ;)
  25. TPISly-C10

    1981-87 Chevy & GMC Truck 1 Piece Vs. 2 Piece Vent Window Seals

    so try to fit a one pieces on a 2 pieces frame is not easy....you can do it but is not a direct retro fit...you have to glue the portion where the 2 pieces have tabs to hold it in place!

Latest posts

Forum statistics

Threads
45,954
Posts
996,870
Members
39,154
Latest member
cmcqueen
Top