Search results

  1. bigcountry78

    Can anyone tell me what this is??

    At the risk of getting attacked here, I’m gonna dip my toe in the water. I vaguely remember reading somewhere that this type of brake controller, that plumbs into the brake reservoir, have been made illegal. The reason being that it could be a problem if installed incorrectly, and if it fails...
  2. bigcountry78

    Towing with an old truck

    I used my 78 as a semi daily driver and as my only truck for a while. Then it got totaled. Anyway, I used it to haul anything that would fit on my 6x12 trailer, but I’d say I never hauled more than 1500 pounds. It handled it well, but if I was going to pull 3,500 pounds I would want trailer...
  3. bigcountry78

    What new tools have you got lately?

    Just got home from Lowe’s. I decided to treat myself a little from some overtime I’ve worked. $180 later I came home with these, a set of folding saw horses, a set of Klein metric ratchet wrenches, and a screwdriver/socket set. I’ll admit that I’ve become a bit of a Klein fanboy lately, I know...
  4. bigcountry78

    Is the polished/chrome tailgate cap stock, on my 87.

    just some advice, the metal bed rail caps will eat into the paint. I had a 2006 Silverado that I used the diamond plate caps on, and they rubbed through the paint. If you use some, I’d go for the plastic tape on type.
  5. bigcountry78

    Which dually - 8.1 vs pre-DEF 6.6?

    I’m just drawing on my own experience, growing up around diesel tractors on a farm. I also made the mistake of buying a 2005 f250 with the 6.0 power stroke. That was a terrible decision that I have yet to live down. For me and my experience, a gas engine in a pickup makes more sense. Diesel for...
  6. bigcountry78

    Which dually - 8.1 vs pre-DEF 6.6?

    Gas gas gas. All day long. Easier, cheaper maintenance. Cheaper oil changes. Cheaper repairs. No anti gel additives in cold weather, no fuel filters, water separators, no glow plugs. And if you end up running out of gas, you just put more in and go. No bleeding lines, just gas and go. And...
  7. bigcountry78

    Towing a diesel 2500 Burb on a 17’ flatbed trailer

    I saw that @bucket mentioned it, but you could load the burb backwards. It would put the longer overhang over the tounge, the narrower axle between the fenders, and the heavy engine bay a little closer to the trailer axles. I know you stated that you already had a rented trailer lined up, but...
  8. bigcountry78

    Whip antenna for CB on a Suburban

    Yes, the rear quarter panel by the tail light would be the best location to put the ball mount. Like you said, it’s not ideal, but it’s the best location for that type of mount. And the 102” whip is the best antenna out there for cb, since that’s actually the ideal size for the wavelength that...
  9. bigcountry78

    Period correct wheels for 86 K10 Stepside?

    Lucky lol. I think I told you about mine, saw some before and after pictures on a random facebook page. He had lifted his truck and put aftermarket wheels on. I messaged him and he said he would sell them, that he had tried to scrap them but the place wouldn’t take them with tires on them. So...
  10. bigcountry78

    Period correct wheels for 86 K10 Stepside?

    Thank you. Took me a 6 month search and a 7 hour round trip to get them lol.
  11. bigcountry78

    Period correct wheels for 86 K10 Stepside?

    I don’t have any idea of the stock dimension. I did do the same thing you’re doing. My dad bought my truck new, and he added 36” tires through the years. As I was working on it and driving it more, I put 33” mud terrains on, then eventually returned to stock springs, 31” all season tires on 8”...
  12. bigcountry78

    Period correct wheels for 86 K10 Stepside?

    This. They’re not super knowledgeable if they can’t tell it has a lift. And, I believe the 4x4 rally wheels would be 15x8.
  13. bigcountry78

    Exhaust Question

    I have true duals in my 78, and have had duals in a couple other trucks. At this stage in life, I would just replace the muffler and be done. I’ve primarily had flowmasters, but I would look at thrush, and magnaflow as well.
  14. bigcountry78

    Looking At A 2005 Z71 4x4

    I had an 04 briefly that gave me ac troubles. I eventually did what you did, cut the belt and move on. But I only had that truck for about 6 months. The 01 we have, and my 06 never gave any ac troubles. I only had my 02 for about 6 weeks before it was totaled, so I don’t count it.
  15. bigcountry78

    Plastic thread repair

    Well, I stopped by the hardware store today and they didn’t have anything that would work. The closest thing I could find is a threaded pipe nipple. But, this specific piece is not a standard plumbing size, it’s something proprietary that falls in between standard sizes. Back to the drawing...
  16. bigcountry78

    Looking At A 2005 Z71 4x4

    everyone has pretty much covered everything, but I’ll add my 2 cents. We have a farm truck, 2001 Silverado bought new. 315,000 miles and it just blew a head gasket, otherwise everything is all original. Even the transmission. Slightly older truck, but the same generation. I personally bought a...
  17. bigcountry78

    Huck's daily - 2005 Z71 crewcab

    I don’t understand the tinted windshield thing. I can barely see at night as is lol. But to each their own.
  18. bigcountry78

    1977 factory installed roof antenna,

    So what you’re saying is, they didn’t work all that well lol. That’s a horrible design for a transmitter antenna.
  19. bigcountry78

    1977 factory installed roof antenna,

    But what antenna did they use?
  20. bigcountry78

    Old Bedliners

    I’ve had both plastic and spray in. I prefer the plastic style, and actually was able to find a used on for my truck on Facebook. In my experience, they don’t cause nearly as much rust and damage as the spray in guys want you to believe. It’s all marketing. However, I would do under the rail, as...
  21. bigcountry78

    1977 factory installed roof antenna,

    I’m going to say that’s an NMO antenna mount, for a cb or public safety antenna. I don’t think GM ever did a factory roof antenna. The NMO can be installed from the top down, snaking the cable between the roof panels, so there wouldn’t be a need for a hole under the headliner. You can either...
  22. bigcountry78

    Plastic thread repair

    I do have a tap and die set, but nothing big enough to fit this. I woke up a little early this morning, and had time to lay in bed and ponder. I came up with an idea, maybe see if I can find a piece of hollow thread. Maybe that’s called conduit, I’m not sure lol. But find a piece that threads...
  23. bigcountry78

    Plastic thread repair

    I like those suggestions. I could probably match it with a trip to the hardware store. It’s not of any real value, just something I’d like to correct so that it’s useful. I keep it under the back seat of my truck, cause you never know.
  24. bigcountry78

    Plastic thread repair

    The smaller end threads into the larger piece, and the smaller threads are worn. ID of the outer piece is 7/8’s of an inch as best I can tell, I only have a tape measure. No caliper on hand. Edit: now that I look at it, it resembles a plastic pipe plug. Now I’m wondering if there’s a way to...
  25. bigcountry78

    Plastic thread repair

    I have an old folding shovel, it may be army issued or it may be a cheap imitation, I’m not sure. I’ve had it forever. Anyway, the handle comes apart and has a saw blade that is supposed to screw into the handle to cut roots. But the threads are boogered and, while it screws in, they don’t catch...

Latest posts

Forum statistics

Threads
45,954
Posts
996,841
Members
39,153
Latest member
Oliver90_08
Top