Search results

  1. B

    Sound dampening

    I definitely agree with the Kilmat on the outer door panel. You don't need to use a lot, there or anywhere else. I put one sheet inside each door and totally killed the tin sound. I did the roof as well before adding the headliner, and you don't have to go crazy over every square inch to get...
  2. B

    Hello from Northern MA!

    Welcome from eastern MA! Great you still have her! (And the wife too) :)
  3. B

    A new comer with a problem

    My whole 8 foot fleetside bed, other than the wheel wells and tailgate, is aftermarket. I got the bedsides from LMC, it feels and looks original.
  4. B

    Rebuilt Stock Steering Column or Aftermarket?

    Agreed! https://columnsgalore.com/
  5. B

    Hi - from Upstate, SC

    Wow great backstory too. Definitely keep it TPI, it's amazing at a show how much attention mine gets because everything is LS swapped these days (for good reason, don't get me wrong). I am running the MSD box with a Holley Dual Sync distributor and an MSD Blaster HVC II coil. But my ECM is a...
  6. B

    Hi - from Upstate, SC

    Welcome and nice rig! Love the TPI setup, it's what I put in my '81 C10 back in 1992, that was a high tech swap back then. That motor does indeed not breath well above 4K rpm, but it was made for low end torque, which makes it great in a truck. When I re-restored my truck over the last 10 years...
  7. B

    Check out my rear end

    I also paid $600.
  8. B

    Thinking about a new smaller steering wheel, comfort grip or forever sharp?

    Same here, Actually mine is out of my 1978 Camaro. I bought it when I was 16 for $400 back in 1994. I junked that POS a year later, but kept the steering wheel and put it in my C10 I just finished building at the time. I'm thinking I'm now going to leather wrap it since it keeps getting sticky...
  9. B

    New to GMSB from Oregon

    If they made them for standard cabs, my 5 foot tall wife would force me to get those.
  10. B

    Headers or manifolds for 86k10 350 w/ Vortec heads?

    People seem to really like the newish Hooker manifolds, if you're looking to go that route.
  11. B

    Steering Column needs to be rebuild

    Something like this? This is on my old column, I installed it in the '90's when trucks still got hot wired. It was no fun to remove.
  12. B

    Vendors

    Aren't you supposed to pay to advertise your employer on here?
  13. B

    New dash bezel deleting wiper switch on dash

    For some bizarre reason, when they moved the wiper switch from the dash onto the column lever in 1984, the headlight knob moved up to roughly where the dash wiper switch used to be. I went through this when I put a newer column into my 1981...
  14. B

    Starter - Looking for Quality

    I've been running this Summit mini starter since 2018. Works great. https://www.summitracing.com/parts/SUM-829105
  15. B

    Have you checked your ground?

    Similar to my first response when I get computer and IT questions at work. Someone eventually bought me this shirt since I say it so much,
  16. B

    Dakota Digital RTX gauge cluster

    The ferrules. Did you make that mount? It's way nicer then what I made, I mounted the brain in the same spot.
  17. B

    Dakota Digital RTX gauge cluster

    I stole that idea from you for this. Worked out great.
  18. B

    High Pressure Fuel pump install

    I will have to take a close up pic and post it. Looking at the truck from the side it kinda blends in. You can kind of tell in the above picture.
  19. B

    High Pressure Fuel pump install

    Oh she's freshly painted. Just got to be careful at the pump (and tall haha).
  20. B

    High Pressure Fuel pump install

    I put mine in the wheel well, and have no gas door on the outside of the bed. That really confuses folks.
  21. B

    Steering Column needs to be rebuild

    I bought a rebuilt column from these guys in 2018. Very happy with it. https://columnsgalore.com/SCG1138B/
  22. B

    67 Mile V10

    There's a few. Here's one.
  23. B

    Pro Flo 4 with Delphi FE0114 or ACDelco EP381

    I'm running a Vortec 350 with a decent cam, about 360hp. I have 30lb/hr injectors at 43psi, running a Walbro pump (255 l/hr which is 67gal/hr). Not a Pro Flow 4 but a similar style setup. For me it is plenty, for you it is definitely adequate.
  24. B

    Transgo kit 1&2 vs SK 400

    He's one of the most helpful people on this forum.
  25. B

    Bench Seat Foam Fitment Options

    I think the answer is pretty obvious. Trying to rehab their bad reputation. BTW he joined another Chevy forum the same day, doing the same thing, responding to posts with USA1 links recommending them.

Latest posts

Forum statistics

Threads
45,954
Posts
996,832
Members
39,153
Latest member
Oliver90_08
Top