Search results

  1. Truck82

    Sbc 350 vacuum hose help

    Yup, that’s exactly what I did. My swap was a 6.2 diesel to a 350. Very similar to your swap
  2. Truck82

    Sbc 350 vacuum hose help

    When you say the small trans line I’m assuming you mean the line coming from the transmission modulator. Correct me if I’m wrong. Then yes, it goes to the port on the back of the intake. Where does the other line come from?
  3. Truck82

    Sbc 350 vacuum hose help

    Are those vacuum line going to the cruise control right now?
  4. Truck82

    Coil spring lift spacer questions

    Do you have pictures of your truck?
  5. Truck82

    Coil spring lift spacer questions

    Does the aluminum not crush under the weight? Obviously it must not be a problem but seems like it would flatten out a little. As for the lift, 2.5 - 3 inches is what I’m going for! Thanks!
  6. Truck82

    Coil spring lift spacer questions

    Howdy! First, I would like to explain my truck and its future purpose. I have a 1982 c20 that has springs from when it was a 6.2 diesel and now has a 350. This makes it leveled. I plan on doing some off road (gravel mountain roads, dirt trails, and a little snow driving with chains) and I will...
  7. Truck82

    Need help identifying this metal line coming out the back of my carburetor

    That’s what I needed to hear. Thank you :D Just wanted to know, can any vacuum port be capped off? Assuming it isn’t needed on the vehicle.
  8. Truck82

    Need help identifying this metal line coming out the back of my carburetor

    Thanks I’ll get a fitting and cap it off
  9. Truck82

    Need help identifying this metal line coming out the back of my carburetor

    This line was tied into the vac line that went to the cruise control when it was a diesel. No more cruise control, so can this be capped?
  10. Truck82

    Need help identifying this metal line coming out the back of my carburetor

    I’ve got hydroboost brakes so this line is not going there.
  11. Truck82

    Need help identifying this metal line coming out the back of my carburetor

    The title explains this post. What is this metal line coming out the back of my carburetor for? Is it needed or can it be capped off? This is a mid 70s (I believe 1977) Rochester 2gc carb. Thanks so much for the help in advance, everyone!
  12. Truck82

    Can't decide what to do. Suggestions? Thoughts?

    ^^^THIS^^^
  13. Truck82

    Rebuild or Swap?

    In my opinion, rebuilding the 350 is your best bet. It’s easy and can be done on a fairly cheap budget and will look great all painted up again. Plus, nothing looks better than a time period correct engine that’s been redone. Again, just my opinions. You do what you want.
  14. Truck82

    Help with gauge cluster lights

    I’ve got a new circuit board and new bulb sockets in the cart and ready for ordering! Thank you!
  15. Truck82

    Help with gauge cluster lights

    Amazons got em for $11
  16. Truck82

    Help with gauge cluster lights

    This video was very helpful. My bulbs were loose in the socket and this will help the keep a connection. I’ve decided to get a new circuit board and bulb sockets so hopefully that will help too.
  17. Truck82

    Help with gauge cluster lights

    Yup, I found that out real quick… :confused:
  18. Truck82

    Help with gauge cluster lights

    I have been using regular bulbs for diagnostic. Still, sometimes a socket will work when I try it and then it will just go out. Very frustrating.
  19. Truck82

    Help with gauge cluster lights

    Good to know as I am swapping over to LED. I didn’t know that the connection was where it touches the board. I have been trying to clean the inside of the bulb holder.
  20. Truck82

    What have you done to your square lately??

    Were the tires you found new? Do you know of anyone who make a 16.5 tire that’s affordable?
  21. Truck82

    Help with gauge cluster lights

    Half of my lights behind the gauges on the dash don’t turn on. So I got some new bulbs, plugged ‘em in and… still nothing in the ones that didn’t work before. I know absolutely nothing about electrical and need some help here. Are the sockets that the bulb plugs into replaceable? Thanks all in...
  22. Truck82

    What have you done to your square lately??

    Never thought of doing it one at a time. Thanks for the tip!
  23. Truck82

    What have you done to your square lately??

    That looks great! Maybe if I can find some hardware at a local parts store I’ll go that route. I don’t want to wait for shipping because I want to get it back on the road as soon as possible.
  24. Truck82

    New to the forum

    Welcome from Washington, neighbor! ;)
  25. Truck82

    What new tools have you got lately?

    Picked these up on offer up. Lots of good stuff. Very quality and like new! Kal, Craftsman, Snap-on, Thorsen, Proto, and a few off brand pieces.

Latest posts

Forum statistics

Threads
45,954
Posts
996,843
Members
39,153
Latest member
Oliver90_08
Top