Search results

  1. nvrenuf

    What is this gauge?

    +1
  2. nvrenuf

    Spark plug gap closed fresh rebuild

    @Cdog_96 Glad it's running good now. Just to say it, while setting the timing are you disconnecting the wire by the harness bulkhead connector down below the wiper motor / master cylinder? (I think it's tan /white stripe)
  3. nvrenuf

    Best Locker for 14Bolt FF in 85 K30

    I ran a Detroit Locker in my old K10 and later moved it to my crew cab, I loved it. I'd buy another one.
  4. nvrenuf

    Whatcha do with that...?

    I don't keep much anymore, I find that a lot of it just ends up being clutter. I really only keep things that have "extra" value for me like mini starters (as opposed to regular), shifters, yokes, locking hubs (Spicer), etc. I do keep a lot of hardware (new & used) and also have a habit of...
  5. nvrenuf

    Need correct core support if my headlights are "dual headlights" with the high under the lowbeams or is dual side by side?

    For dual headlight set ups, side by side vs top and bottom depends on the year. Horizontal and vertical dual set ups were not both available for a given year. It sounds like you’re wanting to convert to a dual light set up from a different year than you currently have. You need to identify...
  6. nvrenuf

    Cruisin the Coast 2024

    OS is great but if you have the time the Long Beach gathering is worth the drive.
  7. nvrenuf

    Cruisin the Coast 2024

    I walked around Ocean Springs and the Long Beach today, lots of amazing cars and trucks! I didn’t see @Redfish truck but there’s so many it’s easy to miss stuff. I’m heading back to Long Beach tomorrow with my Blazer for a full size truck gathering (“Trucks n Tacos”).
  8. nvrenuf

    Msd 8207

    No, the 8207 doesn’t require a box but the wiring sources are different with vs without. I use a 6AL box which supplies the + and - leads for the coil so I didn’t have to find sources from the truck. As for my wiring, I have a secondary fuse block that supplies the constant and ignition 12v...
  9. nvrenuf

    Remembering Kerry "Mike" Perkins (Paladin)

    RIP @Paladin :(
  10. nvrenuf

    Msd 8207

    I’ve got an 8207 but it’s wired with a 6AL, are you using a box?
  11. nvrenuf

    Passenger side axle stuck

    Good lawd, look at the end of those splines. :emotions122::oops: I highly doubt you get your money back on that since it’s obvious you tried to hammer the wrong part in place. In the future, if parts don’t go together, take a minute to double check everything. Ask for help, something. During...
  12. nvrenuf

    Fuel return diy

    Bad news, blue smoke = oil. Gas smoke is black.
  13. nvrenuf

    First time "real" painting.

    Toyota Tacoma
  14. nvrenuf

    Fuel return diy

    I really think the brass fitting in the hose will leak. Find a piece of tubing the correct size, put a nipple in the side and splice it in to the vent hose. I think someone actually makes a tube like I described but I can’t remember who it was.
  15. nvrenuf

    Air Cleaner Stud

    Go your local Autozone, et al and see if they have any all thread / threaded rod. Stores used to keep this in stock in various lengths. Also, check Home Depot or Lowes. Most carbs use 1/4-20.
  16. nvrenuf

    Bearing wear

    To me, it doesn’t look excessive for 160k miles. There’s a lot of wear but no brass(?) showing so it’s not too deep. I wonder about the odd pattern towards the side of the rod bearing though.
  17. nvrenuf

    How to mount 1983 (O-ring style) PS pump on 1975 K10

    I know they make adapter fittings to go from flared pumps to o-ring fittings but I'm not sure about the other way.
  18. nvrenuf

    Cruisin the Coast 2024

    I’m looking forward to seeing your truck again this year, I saw it in Ocean Springs last year - really nice! I’m taking my (not very pretty) Blazer to the Trucks n Taco’s gathering in Long Beach on Friday. I may go to OS on Thursday (without the Blazer).
  19. nvrenuf

    Spark plug gap closed fresh rebuild

    @Cdog_96 any updates?
  20. nvrenuf

    Sm465 sounds like a rock tumbler in 4th gear

    Is it lifted? If so, recently? I’d remove a driveshaft and drive it, reinstall and remove the opposite shaft then drive it. If it’s the trans the noise will continue.
  21. nvrenuf

    How do I test mechanical fuel pump

    Put some sort of catch can on the fuel line or it’ll spit fuel everywhere.
  22. nvrenuf

    Transfer case identification

    What year truck and what transmission?
  23. nvrenuf

    Engine stabilizer bar

    I prefer to keep the bars myself but lots of them get scrapped, it’s not the end of the world. I had a motor with a big Canton pan years ago and had to leave the bars off, I never had any problems. You could get some longer 1/4” flat stock that spans the 2 converter cover bolt bosses and...
  24. nvrenuf

    What have you done to your square lately??

    Drove it some to make sure it’s ready to go to Cruising the Coast.
  25. nvrenuf

    My wife’s new Jeep

    Nice, it looks clean and unmolested. My wife has an 06 LJR, it’s great.

Latest posts

Forum statistics

Threads
45,953
Posts
996,786
Members
39,151
Latest member
grego28
Top