Search results

  1. Edelbrock

    Fuel pump

    When its hard to start, give it a shot of fuel or starting fluid. If that makes it start right up, then you are lacking fuel. If it makes it worse, you were already flooded.
  2. Edelbrock

    Toe adjustment 1987 V10

    You can basically just lean a board up against the front tire, and use a tape measure - like this: (Use one tape measure, not 2).
  3. Edelbrock

    New whitewalls

    Nice tires. I have seen worse....
  4. Edelbrock

    O2 Sensor

    Maybe install an O2 sensor that comes from the factory with a heating circuit? So the sensor heats itself up on its own. You would have to get one that has the same performance values though.
  5. Edelbrock

    Headers and O2 sensor

    From my understanding, headers will not improve the performance of the engine on their own. Headers only allow the potential for other performance upgrades to be utilized in the most effective way. For example: (These numbers are not precise, they are just to illustrate a concept) Stock engine...
  6. Edelbrock

    No crank, no start.

    Yep, hot wire it. That will tell you a lot about what the problem is.
  7. Edelbrock

    Alternatives to anti-sway bar?

    Shocks?
  8. Edelbrock

    1978 k10 hood

    link? For $100 each, I will take two.
  9. Edelbrock

    Headers and O2 sensor

    Another resource might be to call custom exhaust shops. I'm sure they do that kind of work all the time, and would have some experience with what works best.
  10. Edelbrock

    Missing sway bar bolts. Anyone know what size they are?

    Thanks for the info.
  11. Edelbrock

    Skool me on timing w/o timing tab

    Dis lady can skool ya real good about time:
  12. Edelbrock

    What lift do I have? How do I lift it more?

    How long do you figure a 3" body lift would take to install for an experienced fabricator / mechanic that has never done a body lift before?
  13. Edelbrock

    What lift do I have? How do I lift it more?

    The price is right. How hard is the install?
  14. Edelbrock

    What lift do I have? How do I lift it more?

    Pretty sure I have a 4" currently, and Im running 37's. On a flat surface, no rub. But on uneven surface, it rubs even with trimming. That link would be good if I was stock, but that kit would only provide 2 more inches for $900.
  15. Edelbrock

    What lift do I have? How do I lift it more?

    Budget - $1,000 give or take. Tires - the bigger the better. Currently running 37's. 42's would be nice. Trimming has already been done, might be able to do more. Tall over the tires. Body lift? Might be OK, if its not too hard to install and if I can raise the bumpers.
  16. Edelbrock

    1978 k10 hood

    To get it to sit flush, you need to use large screws to attach a piece of square tubing. Press down on the hood to straiten it. Then insert the center screws, and then the outer screws. You drill through the first layer of sheet metal, not all the way through the hood. Don't make the steel tube...
  17. Edelbrock

    What lift do I have? How do I lift it more?

    Thanks for the link. but $1,709.99 for an extra 4" seems kinda spendy. Don't get me wrong, $1,709.99 for an extra 4 inches might be a good deal in some cases, just not for a truck.
  18. Edelbrock

    Can anyone tell me what this is??

    Well, I would call it a broken finger. You slam it in the door or something?
  19. Edelbrock

    What lift do I have? How do I lift it more?

    So it looks like I have a measurement of 12" with the rig parked nose up hill on a fairly steep driveway. So I would guess its a 4 inch lift with some sag, due to the wear and tear. So using the rough estimate of a current 4" lift, what all can I get out of a lift without it getting overly...
  20. Edelbrock

    Blower Motor not working

    This isn't really the answer you were looking for, but it would be a temporary workaround.
  21. Edelbrock

    Alternatives to anti-sway bar?

    I took mine off my 77 K5, and it smoothed out the ride a bit, but the rig can get into a situation where its rocking back and fourth repeatedly when going about 50MPH, and I have to slow down to get it to stop. The whole cab leans to the right then left then right and so on. Its very annoying...
  22. Edelbrock

    Missing sway bar bolts. Anyone know what size they are?

    So I'm missing the bolts that connect the sway bar ends to the top of the leaf spring. Anyone know what size they are? What bolts would I order?
  23. Edelbrock

    What lift do I have? How do I lift it more?

    So its a 77 K5 Blazer. No idea what lift it has on it, but I would like to find out. Looks like about 4" blocks in the rear. Rear sits a little lower than the front. 37" tires that rubbed a little before I fixed the issue with a sledge hammer. Still rubs on tight turns on uneven ground...
  24. Edelbrock

    Where are you tapping into for ACC power?

    Unless you are powering an amp, I would not run the power wire all the way to the battery.
  25. Edelbrock

    Buying a rebuilt transmission th350

    Your current trans is still working properly? My advise would be to stop right there. Crud in the trans pan is normal, and does not mean that there is a problem. Now if your transmission starts acting up, then you would want to start looking for a replacement. What if you buy that spare...

Latest posts

Forum statistics

Threads
45,934
Posts
996,393
Members
39,138
Latest member
Dadoo
Top