Search results

  1. Ron Sebastian

    Dual tanks work, but maybe not switching the gauge?

    Long shot, but after a lot of parts changing, a bad ground on the switch cured a big problem of gauge not reading right. Check your ground wire and ground to the switch.
  2. Ron Sebastian

    Problems with lift kit (ORD) install...

    And I'm sure that shop used that to torque all those nuts, as well as the sway bar disconnect bolt that mysteriously disappeared.
  3. Ron Sebastian

    New discovery on fuel issue

    My fuel pump/sending unit was going bad, replaced all that. The pump was a high pressure model that blew out my selector valve and flooded my charcoal canister. That to some time to figure out Also believe it or not the ground going to the selector switch in the cab was bad, ran a whole new...
  4. Ron Sebastian

    fuel switching valve cover attaching points?

    Come on, I know at least one of you still have this shield on. Go look!
  5. Ron Sebastian

    fuel switching valve cover attaching points?

    Since taking the cover off to replace the valve, I can't for the life of me remember how it all goes back together. I have the furthest hole back attached and the bar attaching it to the frame, but the furtherst forward hole in the cover does not appear to have anywhere to bolt to. Can't find...
  6. Ron Sebastian

    Problems with lift kit (ORD) install...

    Extra long deep socket, right!
  7. Ron Sebastian

    Problems with lift kit (ORD) install...

    I'd like to know what tool they used to torque that long U-bolt?
  8. Ron Sebastian

    '87 V1500 2" Lift Advice

    Also did ORD kevlar bushings and greasable bolts on all points. I think it helped the 35 year old suspension.
  9. Ron Sebastian

    '87 V1500 2" Lift Advice

    Looks great! I know exactly what you had to go through. By the way I also installed the ORD sway bar disconnect and I might be the oddball but I feel it rides better with the sway bar connected.
  10. Ron Sebastian

    Fuel tank sending unit broken hose

    I have had to drop the tank several times over the last month. Six bolts drop the tank. Undo the filler tubes and use a floor jack to lower the tank. Loosen the fuel lines, pull the wire plug and it's free.
  11. Ron Sebastian

    Method 701 milled aluminium rims

    16
  12. Ron Sebastian

    Method 701 milled aluminium rims

    I just added 1" spacers. The tires don't stick out obnoxiously and not much at all in the rear. 4" backspace clears the tierod, 4.5" which mine are hit.
  13. Ron Sebastian

    New Method 701 racing wheels

    I can tell you this, Method claims you can air down to 8 PSI, which I believe. Watching the guy mount the tires, his machine was airing up so slow, it got way up around 65PSI and the tire was bulging all around until it finally popped in. Scared the whole shop x 4. He said if it did ever break...
  14. Ron Sebastian

    New Method 701 racing wheels

    Your guidance was spot on. Could not ride better with that suspension!
  15. Ron Sebastian

    What are the odds

    Took a month but finally figured it all out. What are the odds of having a bad ground on a new fuel tank switch and a bad switching valve. Not being a mechanic or electrical engineer happy to have her rolling along in tip top shape.
  16. Ron Sebastian

    New Method 701 racing wheels

    No more vibration.
  17. Ron Sebastian

    Splash guard ideas

    The second down are my preference. Didn't find specific to squares though.
  18. Ron Sebastian

    Splash guard ideas

    Since changing rims and gaining some inches sticking out, is there nice molded splash guards made for squares? Can't seem to find any.
  19. Ron Sebastian

    Ran out of gas, but tank not empty

    Don't know, just adding my two cents. If he dosen't have electric pumps, he knows to disregard my comments. Someone else reading this might though. Should I have kept my opinions to my self?
  20. Ron Sebastian

    Ran out of gas, but tank not empty

    Careful with the new fuel pump and sending unit you buy. I went through three of the Delphi HP 10255 Hanger Assembly's before I figured out that pump sent out fuel at like 85 PSI which blew out the fuel tank selector valve and over filled the other tank and charcoal evap canister.
  21. Ron Sebastian

    Gauge stuck past full (3 O'clock)

    AC Delco U7001. Bought one on Rock Auto, one on eBay and two on Amazon. What the hell, all the reviews on Amazon say they are great, fixed the problem. Am I buying the wrong item?
  22. Ron Sebastian

    Gauge stuck past full (3 O'clock)

    Dropped the gas tank for the umpteenth time to inspect the brand new fuel pump and sending unit, all good. Disconnected each connector between the tanks and the third brand new switching valve. All good. Can only be the switching valve internal, because the right tank fuel level reads correct...
  23. Ron Sebastian

    Jackman mojock wheels aywhere to buy

    May be getting rid of these shortly. These are Jackman originals, diamonds not spoked though. Never seen another set like them. Heavy steel.
  24. Ron Sebastian

    It's never that easy

    Great info, thanks!
  25. Ron Sebastian

    It's never that easy

    Now that I know it, I can't not see it. I don't like knowing it's not square!

Latest posts

Forum statistics

Threads
45,933
Posts
996,327
Members
39,132
Latest member
mwheats
Top