Search results

  1. V

    Replacement Jeep Steering / Intermediate Shaft

    Thanks guys, I'm ready through the sticky now.
  2. V

    Replacement Jeep Steering / Intermediate Shaft

    Anyone?
  3. V

    Zero Rate for 1" added in rear?

    OK, thanks guys. I checked the Tuff Country website and don't see that they offer any (maybe they do and I just haven't found it). I thought surely they would have a set. Is it common with lift springs that the rear would sit lower? I realize the fenderwells aren't equal and can cause the...
  4. V

    Zero Rate for 1" added in rear?

    I just put 3" EZ ride lift springs front and rear on my '87 k5, and I feel the rear is sitting a little bit lower than the front. I've heard I could add a zero rate to the rear to pick it up an inch, but I don't exactly understand how that works. Is it basically just a small block that mounts...
  5. V

    Replacement Jeep Steering / Intermediate Shaft

    I have a 1987 K5 4x4 (3" lift if it matters) I have read that the Jeep Cherokee intermediate shaft from 1988-96 is a direct bolt on replacement for the Blazer steering shaft. Is there any particular year in that range that is best? I'm going to purchase a new shaft as I need my truck on the...
  6. V

    Do You recognize this receiver hitch brand?

    OK, thanks.
  7. V

    Do You recognize this receiver hitch brand?

    This is for sale locally. It's for a K5 blazer, but seller is unsure what brand it is. Does anyone recognize it? It's from the 70's or 80's. Thanks,
  8. V

    EZ Ride springs: Regular or HD

    Thank you for the responses.
  9. V

    EZ Ride springs: Regular or HD

    I have an '87 K5. I have decided to go with the Tuff County EZ ride 3" lift springs. I have a winch and a winch bumper. I mostly do on-road driving, so ride quality is more important than off-road performance. I'm curious of your experience: Will the weight of the winch and winch bumper...
  10. V

    4" to 3" Lift Springs

    I have an '87 K5. Years ago I bought a 4" lift (front springs, rear blocks) from a friend selling it. My truck has 33" tires. It actually taller than I wanted and now I've got my truck running again. I'd like to go to a 3" lift. The original kit came with an extended steering knuckle...
  11. V

    What reman heads to use?

    I purchased reman heads. My heads were mismatched. One side had the 14102193, 64cc swirl-port head and the other had the 14102191, 76cc, non-swirl-port design. They had not been machined to have the same compression either. When the heads came in, one of them was boxed wrong, so I'm...
  12. V

    What reman heads to use?

    Thanks for the reply. Of the companies that are out there, what are some reputable name brands?
  13. V

    What reman heads to use?

    I need to get a set of reman heads for an '87 K5 Blazer. It has a 350 in it that is not original to the truck. There seems to be an almost infinite number of choices. What is a good, reliable brand to go with? Not looking for a hot rod, nothing fancy... just a stock setup to get my truck...
  14. V

    HVAC vacuum line diagnosis

    I also meant to add that I had to cut the engine off, then run around to the engine bay, because the sound of the leak was so quiet.
  15. V

    HVAC vacuum line diagnosis

    To follow up, there was a very small crack on the vacuum line about 1 inch after it came out of the firewall. The only way I could tell is if I started the vehicle, let vacuum build up, and then ran around to listen to the hose while I moved it in that spot with my fingers. A small hissing...
  16. V

    HVAC vacuum line diagnosis

    Thanks for the replies. As I stated above, all the lines and connections under the hood are OK. I have an '87 so the computer is mounted behind the glovebox and on top of the HVAC box. I haven't been able to reach around it to trace the wires. If I remove the computer would I be able to...
  17. V

    HVAC vacuum line diagnosis

    Hello, 1987 K5 Blazer. After sitting for 7 years, the air mostly only blows out of the floor. I have checked the vacuum line under the hood and everything is good. I have applied vacuum to the defroster vent and it does operate when I apply separate vacuum. I unbolted the dash selector and...
View older results

Latest posts

Forum statistics

Threads
45,583
Posts
986,860
Members
38,672
Latest member
Knightewulf
Top