Search results

  1. shanegtr

    windshield wiper return issue

    Need a bit of a thread dig on my own thread here. So I haven't really looked into this issue much since 2018, but for us here in Australia winter is on its way so I'd like to sort this issue before then. Whats changed since I last posted is a new pulse module and new wiper motor. Both of those...
  2. shanegtr

    Wanted Suburban 3rd row seat parts - Australia

    Hey all, the third row seat in my burb is not the same colour as the rest of the trim. As squarebodys are kinda rare in Australia finding a replacement in the right trim colour will be next to impossible. So my next best option will be to retrim it and paint the metal parts that are brown. I was...
  3. shanegtr

    What have you done to your square lately??

    My Suburban is now driving nice and straight thanks to a change out of pitman arm, idler arm and tie rod ends, plus new front calipers has helped under brakes. Its always pulled slightly to one side under light brakes but straightened up once heavy pressure was applied. Turns out a stick caliper...
  4. shanegtr

    Zinc, Engine oil and flat cams

    Detergents also neutralise acids as they are alkaline based, its the main additive for the reserve alkalinity of engine oils. They will often (especially in the case of diesel oils) be used with a dispersant additive - thats all about preventing soot particles from agglomerating and keep them...
  5. shanegtr

    Rear bumper pad for 1991 suburban r1500

    If you find a source let me know, I'm also interested as mines been butchered a little
  6. shanegtr

    TH400 shift problems (At the column)

    I've been having a similar issue lately with my burb. Very hard to shift from P through to D, cant really feel any of the gear detents. Cant get the trans into 2 or low with the shifter. I need to disconnect the shift mechanism and see where the issue lies - in the trans or shifter
  7. shanegtr

    Hi From Melbourne Australia

    I guess everyone else did too, that's why they no longer exist
  8. shanegtr

    Hi From Melbourne Australia

    Welcome from Perth
  9. shanegtr

    R20 Stock Ride Height?

    Full airbag to the rear would be ideal, but where I am it would likely be too much $$$ for registration engineering certification for me to bother with.
  10. shanegtr

    R20 Stock Ride Height?

    I thinking front could do with some drop spindles and then change the springs to something with a softer rate and maintain the current height. Or change to full airbag on the front as well could be an option I'll likely get the rears reset locally and I'll look at getting some leaves removed to...
  11. shanegtr

    R20 Stock Ride Height?

    Bit of a thread mine, but I'll blame google for unearthing it:) Anyway I've been thinking about doing something to make my 3/4 burb ride a little nicer. But first I wanted to see what sort of drop its had. Is there anymore specific measurements available to the above chart - anything that takes...
  12. shanegtr

    Noob here with my 1973 Suburban

    Welcome, very nice burb
  13. shanegtr

    What have you done to your square lately??

    Threw a new distributor, coil and leads into my Burb. Found the harmonic balancer has slipped the outer ring when timing her up, so guess I'll be adding that as one of the next jobs to do
  14. shanegtr

    Greetings from 89 Suburban owner in New Zealand

    Welcome from Western Australia
  15. shanegtr

    removing cluster from 89 burb

    It wasn't a tap I believe that may have been a typo and was supposed to be tab. At least that's my interpretation as I did have to depress a tab/spring clip. That was a new one for me as every other car I've worked on with a mechanical speedo the cable was screwed to the back of the cluster.
  16. shanegtr

    removing cluster from 89 burb

    well, I found the issue and that's not it:p
  17. shanegtr

    removing cluster from 89 burb

    So now I just need to figure out why the speedo cable drive is dropping out after 5-20min worth of driving....
  18. shanegtr

    removing cluster from 89 burb

    Bingo - you where on the money. Thats the info I required. Instrument cluster out!
  19. shanegtr

    removing cluster from 89 burb

    Well that method wont work for me - full fibreglass dash from the right hand drive conversion.
  20. shanegtr

    removing cluster from 89 burb

    I've had some feedback on a facebook group to just pull the cluster forward and then remove the speedo cable. Unfortantly I cant pull it forward due to the dash design. The cluster needs to move to the right in order to clear everything. Theres a metal beam behind the cluster and the speedo...
  21. shanegtr

    removing cluster from 89 burb

    Hi All, Im in the process of trying to remove the instrument cluster in my 89 burb due to an intermittent speedo issue. Just have a quick question regarding removal of the speedo cable. It looks like theres a couple of screws that are required to be removed for the speedo cable to come out...
  22. shanegtr

    Emissions removal instructions thread?

    While we are on this subject, I just started removal of the smog pump from my 89 burb - 454 TBI. I've just removed the pump and idler pulley along with all the brackets for those. Although I do need to cut it down a bit as it had a support for the front of the A/C compressor and without it I can...
  23. shanegtr

    Lets see those 20" rims!

    Heres my Burb on 20's. Tyres are 275/45/20
  24. shanegtr

    454 TBI manifold - air injection

    Hi All, I've got a question for you all in regards to the air injection ports on a 454 exhaust manifold. Im looking at removing the air pump and all the pipework (I dont need to worry about emissions stuff here). I'd like to know what size plugs would be required to block up the manifolds once...
  25. shanegtr

    Welding or Lunchbox front Diff locker for K10?

    If your going to spool or weld the diff do it to the rear one not the front. If you do it on the front axle then steering will be affected any time you have the hubs locked in. Auto locker, LSD or selectable locker in the front only IMHO

Latest posts

Forum statistics

Threads
45,579
Posts
986,819
Members
38,671
Latest member
Mavric16
Top