Search results

  1. lusktommy

    350

    ok well you have LT heads so your gonna have to modify an aftermarket carb intake or buy one all read modified, its your choice on the intake. now a 350 came factory when it came with a carb was a 750CFM rochester 4 barrel and they are awesome carbs personally i love them. but on a 350 your...
  2. lusktommy

    Noise identification lol good luck

    oops if you do count the teeth you may already know this but divide the ring gear by the pinion shaft and and it will give you exactly what ratio is 41 divided by 11 is 3.73 37 divided by 9 is 4.11 41 divided by 9 is 4.56 correct me if im wrong on those counts but im pretty sure thats...
  3. lusktommy

    Noise identification lol good luck

    you can get the numbers off the axle tube (you will need a wire brush) they will be on the passenger side tube on the front side get all the numbers on the tube call a local dealer talk to someone in the parts department and ask them to see what it is. and if you wanna double check it pull the...
  4. lusktommy

    Need Carrier Bearing Crossmember for My 1984 C10

    yes ive been looking but where im at no wreaking yards have these trucks they have gotten rid of them, and i cant afford to drive way the heck off to get one, and wreaking yards are not willing to cut the rivets and get me one. So im in a spot. id would much rather have the original equipment...
  5. lusktommy

    Need Carrier Bearing Crossmember for My 1984 C10

    are you sure? im not needing the actual carrier bearing im needing the bracket it mounts to, that bolts to the frame.
  6. lusktommy

    Dead positrac...

    that 1984 pickup is gonna have bell end driveshafts like mine does and they cant be lenthend he is gonna have to some built more than likely
  7. lusktommy

    Dead positrac...

    if you go with a 8in suspension lift remember your are gonna have to have custom drive shafts made that get very expensive, and you mentioned running low on money i would just make the truck as reliable as i can you are a couple years younger than me and if your like me you have a heavy foot...
  8. lusktommy

    Noise identification lol good luck

    i didnt think about that but yes they can come out very easly
  9. lusktommy

    Noise identification lol good luck

    Wow someone really didnt know how to set up a rear end at all and really cost one hell of a headache. dont you just hate idiots that do stuff they have no business doing. lol as soon as i seen the pic i seen the pin hanging out. someone that wouldnt know what to look for wouldnt notice that but...
  10. lusktommy

    Need Carrier Bearing Crossmember for My 1984 C10

    if anyone knows where i can get a carrier bearing crossmember plz let me know i need on in a bad way lol ive been finding out that they are riveted to the frames it that true and if so where might i be able to one ive found one on ebay but it was already sold so i know they come out some how...
  11. lusktommy

    RCSB one-piece driveshaft lengths?

    ah well thanks man good looking shorty btw
  12. lusktommy

    Fuel guage/sending unit issue

    you might try replacing the switch on my 1984 it did the same thing and it was the switch not sending enough voltage because gauges read off of resistance and not having poor connection will cause them to do exactly whats happening. and a sending unit could i suppose but i would try buying a...
  13. lusktommy

    LED Interior Lights

    i also converted my 1984 to all LEDs its pretty awesome
  14. lusktommy

    RCSB one-piece driveshaft lengths?

    On your 84 with the 700R where did you get the Carrier bearing Crossmember im looking for one ill just build one if i have too i have an 1984 Chevy long bed pickup its in my pics if you wanna check it out. but i shelled the 700R with the motor i built for it and im putting the short shaft 350 in...
View older results

Latest posts

Forum statistics

Threads
45,579
Posts
986,819
Members
38,671
Latest member
Mavric16
Top