Search results

  1. M

    35s with 4 inch lift

    Also the stock k20 white wheels what are there back spacing?
  2. M

    35s with 4 inch lift

    I know mine are like this but I didn't do it. Is it safe to do an 8 inch wheel with a 12.5 inch wide tire? Is there a write up on trimming on this site?
  3. M

    35s with 4 inch lift

    Ok so right now I have an 85 k10 with 4 inches of lift on stock 15x8 rims with 35x12.50 15. I am fixing to swap in axles from a V(K)20 from 87 with 4.11 gears. I am looking at some black rock rims on summit racing and I am going to get the 16 inch equivalent of a 35x12.50 but will they still...
  4. M

    Smoking Truck

    It runs strong but shakes some at idle but still has sufficient power no hiccups during hard acceleration and no puffs of smoke during hard acceleration. Why would it smoke until the truck was warmed or started moving and not just one puff or so at start up? I have probably put about 750-1000...
  5. M

    Smoking Truck

    I have not done a compression test yet. I will try to get that done this week. An old man had it and an upholstry company bought it from him and they drove it once or twice a week it may have sat some but I dont know. I am also looking for oil advice. The previous owner said that he used...
  6. M

    Smoking Truck

    Its 150000 original miles on the original 305. Thats what i thought. I want to go ahead and replace seals but im wanting to know if there is a way to check piston rings.
  7. M

    Smoking Truck

    I have an 1985 k10 with a 305. It has roughly 150000 miles. It has been smoking on startup since I got it. It hasnt been much smoke just a puff but it smokes until the truck has started moving or is at normal operating temperature. And then just stops. I feel like it is the valve seals but...
  8. M

    stock height with 31x10.50 wheels

    I don't even know I hadn't given it any thought until the conversation came up in the thread today.
  9. M

    stock height with 31x10.50 wheels

    What all is involved with moving the perches and mounts? I have a truck that my father has that's a 95. So I have those axles for free if the mounts and perches aren't to hard to relocate. Thanks for clearing that up andy.
  10. M

    stock height with 31x10.50 wheels

    Will the 88-98 axles work with the k10 or will there have to be some modding?
  11. M

    stock height with 31x10.50 wheels

    What's the easiest way to swap the rear To have the special U joint or to modify the drive shaft?
  12. M

    stock height with 31x10.50 wheels

    I looked awhile back but I'm pretty sure it's the NP208. What are the difference I the np203,205,208? Is it possible to use the k20 gears and housing but the k10 axle shafts? Just a thought to use the same rims and tires from the k10
  13. M

    stock height with 31x10.50 wheels

    If I found a rear axle before the front could I put the rear in with 4.10 as long as I don't use the 4x4?
  14. M

    stock height with 31x10.50 wheels

    That doesnt sound to expensive. Does anyone have pics to see what the smallish tires will look like with 4 inch lift? The transmission is why i wanted to go with the smaller tires.
  15. M

    stock height with 31x10.50 wheels

    How much would a set of axles cost? Also Wouldnt the 4 inch lift look funny with the smaller tires? Anyone have pictures of that?
  16. M

    stock height with 31x10.50 wheels

    Do they make a k10 axle with a 4.11 ratio? I think ive heard the k20 has some that are 4.11.
  17. M

    stock height with 31x10.50 wheels

    I could probably do it but how much a set of axles be? I have a 700r4 transmission.
  18. M

    stock height with 31x10.50 wheels

    I would love to keep the 35s and the 4inch lift. I think it lloks great.
  19. M

    stock height with 31x10.50 wheels

    I dont have the ability to install the correct gears for the 35s it is a total dog with the 305 off the line. Its got 3.08s with 35s
  20. M

    stock height with 31x10.50 wheels

    tim and john both of those look good thats exactly what im going for.
  21. M

    stock height with 31x10.50 wheels

    I did not know that. Mine is the 235/75r15
  22. M

    stock height with 31x10.50 wheels

    Hi everyone. I wasn't sure what category to put this thread in so it's here cause it is mainly about the tires. I just bought a 85 k10 with a 4 inch lift and 35s the previous owner didn't know he needed to regear the rear end so he was running the stock 3.08s with the 35s. I am wanting to go...
View older results

Latest posts

Forum statistics

Threads
45,570
Posts
986,573
Members
38,662
Latest member
imyourhuckberry
Top