Search results

  1. M

    Oil Pressure

    I thought it was only the High Pressure pumps that required looser clearances ?
  2. M

    New to chevy

    You'll never go back! :)
  3. M

    Carpet from brothers

    Small Hump = 2wd automatic. Big Hump = 4wd Automatic/Manual Transmission and 2wd Manual Transmissions.
  4. M

    Quadrajet question

    I have tried that stuff before but it wont last. Just for the simple reason that its just simply smeared over the top of the plugs.
  5. M

    Which headers?

    http://www.summitracing.com/int/parts/hed-69090/overview/
  6. M

    Quadrajet question

    You could just wait for them to start leaking again. And then you just have to get some pics and small screw drivers and just pick the epoxy off. The set screw job will probably take you all day to do and maybe more to make sure you get it done just right! So I would just use it and in the...
  7. M

    Removing a broken key?

    Tweezers ???
  8. M

    New Shoes for the Ol Girl

    I like the matching bumpers and mirrors! I really like how those old trucks looked like real beasts!
  9. M

    Front axle shaft joint replace

    bump
  10. M

    Quadrajet question

    The Epoxied plugs will leak again they all do. That's why you have to install the threaded set screws. One other thing if any one does this fix, is that obtaining aluminum set screws will work better so that when the carburetor body heats up the aluminum will heat at a similar rate vs...
  11. M

    Steering arm

    Ya if you cant get the cones to move you could beat on it all day long and never get any where. Another trick is to heat it up but not red hot(so you don't mess the temper up). just warm enough so that when you spray WD40 on it, the WD40 gets sucked in from the heat. This greatly speeds up...
  12. M

    No filter, making a setup

    Do I look like Im concerned with 1/4 mile rules ? LMAO MY K20 running the strip? Now there's a laugh and a half LOL FYI that is high pressure reinforced and braided fuel line. And like I said it wouldn't take much to bend up a metal line in place of the rubber line in the pics. The point...
  13. M

    My 1991 v1500 suburban

    Dude don't waste anytime on a drop steering arm. They are junk and shouldn't even be made in the first place! It will throw your steering geometry way off. That's why there junk. ONLY USE A RAISED STEERING ARM !!! You could use a block but they can be dangerous! Just spend $80 on a raised...
  14. M

    What have you done to your square lately??

    No it would be 27 splines. The Th400 and sm465 used 32 splines with a 208. But if you just want the case half then it doesn't matter or take the 32 spline input gear out of your broken one and put it into your transfer case from the th350. Or take the whole transmission and transfer case and...
  15. M

    shake

    I dunno. HotRodPC
  16. M

    Resurrecting Clifford the big red 87 R3500

    Ahh it might not be a POS but it sounds like the guy is letting you know he wants to milk you on the price. I had a friend who thought he was being low balled. But honestly I wouldn't even offer him what he was being lowball offered lol. His idea of fair value was double what it really was...
  17. M

    What have you done to your square lately??

    No its not the slip yoke its the input gear that is different depending on which transmission you get it from. All the slip yokes are the same.
  18. M

    Please identify these parts!

    Ya that sounds more like it actually
  19. M

    What have you done to your square lately??

    Ya I see. Well if you can find one. You could do that. Any TH400/4L80 or SM465 with a 208 or NP241 will work to swap. I guess any 208 will swap case halves if you swap all your internals
  20. M

    No filter, making a setup

    I had planned on using an actual -6AN fitting to connect to the filter. Well actually it is but the 2 piece fitting design stripped so I just have a C clamp on it for now. One of these days I will get a proper looking flex line made up or maybe a solid metal line. Any ways the way I plumbed it...
  21. M

    What have you done to your square lately??

    Oh shit man that sucks. Yep you need a whole new case. Or a whole new transfer case. Its probably easier to just find a good working case and swap it. IF I were you I would try to upgrade to an 88-89 NP241 90' up use VSS for the speed signal, otherwise they fit just fine too. What...
  22. M

    Quadrajet question

    I should mention that when you epoxy the primary fuel well set screws, that you have to be very careful that you don't tighten the set screw all the way down, or you will block off the main jet passages. Take a flash light and look down the main jet opening while at the same time tightening in...
  23. M

    Quadrajet question

    Better off replacing the intake with an Edelbrock 2101. But ya for sure plug the tubes off that come out of the intake or make an actual block off plate for where the heater tube goes.
  24. M

    Quadrajet question

    I could post some pics if that would help? You can just remove everything as one piece and then its just a matter of getting the little lever on that goes from inside the body on the choke coil shaft to the actual choke plate. Its actually really simple if you use the right technique.
  25. M

    What have you done to your square lately??

    Where is it cracked? Probably the reason it cracked is cause it had no torque bar. What is it? 208?

Latest posts

Forum statistics

Threads
45,562
Posts
986,306
Members
38,647
Latest member
rumph13
Top