Search results

  1. Donald

    Old Tractors

    Here is my 76 Massey Ferguson pull tractor and it's big brother
  2. Donald

    What non 73/87 parts have you swapped into your squarebody?

    Seat out of 88 c10 with some reworking of seat mounting .
  3. Donald

    Pick the fav car you owned but follow instructions:

    The duce is PPG electric pearl green .
  4. Donald

    Pick the fav car you owned but follow instructions:

    First pick 1962 Chevrolet bubble top bel air 409 second 1963 Chevrolet Impala SS 409 third 1961 Chevrolet Corvette 315 fuel injection forth and my favorite 1932 Ford roadster 355 sbc Richmond 5 speed halibrand quick change rear .
  5. Donald

    What have you done to your square lately??

    Just finished installing a 87 Blazer fuel tank . Because I flipped the axle C'ed the frame and narrowed the rear it I had to move it as far back as possible to clear the diff . I used a 87 tank so I can install fuel injection at a later date , also made my own stainless steel straps . Had to...
  6. Donald

    Axle Swap

    OK , I did it , I ordered axles from Moser . The Chevelle axles are not as thick as the c1500's . I also ordered 3.42 gears and hardware . It is more money but everything will be new . Now all I have to do is cut the tubes . Thanks for the feed back to all . Don
  7. Donald

    Axle Swap

    OK here is what I found , I can use 1970 Chevelle axles 28 spline and 1985 Impala bearings , cut 1.5" out of both axle tubes and redrill bolt circle That will make a 60" wide unit . Don
  8. Donald

    Axle Swap

    I have the wheels I want , all the axles I mention are the length I need to make the overall width I need and I have enough axle tube to narrow with out moving the spring pads . What I need is a axle bearing the will adapt one of those axles to fit the 1500 housing .
  9. Donald

    Axle Swap

    I have a 85 GMC 1500 short bed . I want to narrow the rear axle to 60" about 1.5" per side , tires hitting 1/4s . What GM corporate 8.5 axles will fit the 1500 axle housing and bearings . Will Chevelle , Nova , F body , or ? fit . I have tried to match up the sizes but it looks like the axle...
  10. Donald

    Frame undercarriage prep and paint

    Me being of Scottish descent , I have done several cars and trucks with Rustolum satin and had very good results just make sure the surface is clean . If you don't have or want to spray the paint on , use a brush and when the paint is still wet take a foam brush torn it sideways and pat the...
  11. Donald

    Brake & turn signal light issue

    This may sound dumb but check your bulbs , if you have a single contact bulb in a socket that is for a double contact . It will cause back feed problems like what you are getting . Don
  12. Donald

    Fuel Tank Relocation

    Sorry about the 35 lbs. for the stock 87 fuel pump , I worked for Nissan and there throttle body used 35 lbs. Thanks Old77 for the info. Now all I need is time to do it . Don
  13. Donald

    Identify intake

    Looks like a EGR aluminum manifold that was used on Z28s late 70's to early 80's . They aren't much for performance , you can find them at car show flee markets for $35-$45 . Don
  14. Donald

    My other toys II

    Other toys , 1932 3 window coupe and a Massey Ferguson pull tractor . Don
  15. Donald

    Fuel Tank Relocation

    OK , I have done some looking around and this is what I have found . Using a 87 blazer tank and sending unit to get 65 lbs. pressure you need for a fuel tech throttle body fuel injection use a Delco EP381 fuel pump . Don
  16. Donald

    Fuel Tank Relocation

    Hi to all , I have a 85 GMC short bed (under construction) I would like to install a blazer rear tank and get rid of the side tank . Has anyone done this , I searched and could not find a thread about this . I want to use the smaller tank 20 gal. and would like to install a throttle body fuel...
View older results

Latest posts

Forum statistics

Threads
45,558
Posts
986,228
Members
38,644
Latest member
FenderBanger
Top