Search results

  1. randomTruckKid

    700r4 leak

    Ahhhh. Okay. We were looking at it and it is zip tied and we didn't think it was right.
  2. randomTruckKid

    700r4 leak

    I have this leak that I think started after I took the cab off. But I belive it might have been going since before. But it's been getting worse and worse. The plug is wobbly. I thought it was the od sensor but I can't find much info on it. That puddle you see under the truck is from just last night.
  3. randomTruckKid

    Sway bar for lifted c10

    Is there a difference to spring rates between coilovers and regular springs? As in. If a regular spring says it's 850lb in is it stiffer compared to a coilover of the same rate? Or do I have this all wrong?
  4. randomTruckKid

    Electronic speedo 79 c10.

    I actually haven't heard of them. But imma look into that, though I need something that isn't extremely expensive.
  5. randomTruckKid

    Electronic speedo 79 c10.

    I'm wondering if anyone knows of any speedo gauges for a electronic vss. I have a 90s 700r4 in my truck and I need to put a electronic vss in it. However I don't know of any gauges besides one. (Automeeter 7004) that has thw ability for one and to be calabrated. Anyone have some help?
  6. randomTruckKid

    Sway bar for lifted c10

    Any thickness or one you suggest? I don't know what would be considered good.... yet.
  7. randomTruckKid

    Sway bar for lifted c10

    Rear has several removed leafs. I do agree front is maybe contributing a little. It has new springs but they are factory c10 rate. But I think it's a combination of lack of sway bar and really light rear springs... maybe a little front. Also sorry if things go over my head. I have a small...
  8. randomTruckKid

    Sway bar for lifted c10

    Well thank ya
  9. randomTruckKid

    Sway bar for lifted c10

    the front is all new. Def need sway bar.
  10. randomTruckKid

    Sway bar for lifted c10

    I eas looking for front and back bars. Something thicker. But I don't know what size to get
  11. randomTruckKid

    Sway bar for lifted c10

    im also thinking about getting ne rear leaf springs? instead of the blocks. hope that can reduce roll by adding more stiffness, though i have no clue ho to measure hat i need.
  12. randomTruckKid

    Sway bar for lifted c10

    I need a sway bar for my lifted c10. There wasn't one before because there was no need but now that it's so high It rolls alot. So I'm looking if anyone knows about what size I need along with any other info. Thx
  13. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    All done. 37.5" front 37" in rear.
  14. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    Squat.
  15. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    That kinda looks like one of the ideas we had. We were thinking abt taking the old control arm shaft and using it as a giant shim after we welded the bolts. But if getting the studs would eliminate us having to do that.
  16. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    I don't think there I'd many. There is one called project rocky that I've mentioned in a few threads. However they did their lift with some HD springs(whatever that means) and obs balljoints and spindles. Most of my lift is coming from some 4.5" lift spindles that are made now. Along with a...
  17. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    It was 2x worse before. I have 8 extra shims now. Ignore all the plates that has nofthing to do with the truck.
  18. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    :/
  19. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    They're just grade 8 bolts that were the same size/length as what we cut off. We are lifting the truck it was previously lowered 3 in. But I was really suppried when I still had to put quite a few shims in. then the other side. Also the c20 control arms were advertised as c10 ones. They...
  20. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    I got the driver side almost completely assembled. We still need to do the spinning part. But we are still having to shim the upper control arm way out. "1 - 1.5" Like the previous people had to do. So am i missing some facrtory part or is this just how its going to be? Also on the passanger...
  21. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    Nvm. We somehow got it through!
  22. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    Kinda what I figured but I hoped someone knew a way around it.
  23. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    Well I tested the upper and lower w/ new spindle and it fits thankfully But here is a new issue. We have to swap out the bolts for the upper on the passanger side here since last person screwed it up. How do I get the bold back in? I get it put since I got to grind the weld off. But the space...
  24. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    I'm guessing they wouldn't fit even with c10 ball joints on them?
  25. randomTruckKid

    Just want to make shure im reinstalling new control arms correctly.

    Ah. I didn't try too hard to move it since the last time I worked on the truck I was sick. How can you tell they are for a c20 not c10? They were orderd for c10 and are almost identical to the originals.

Latest posts

Forum statistics

Threads
45,558
Posts
986,230
Members
38,644
Latest member
FenderBanger
Top