Search results

  1. randomTruckKid

    Brakes still dont work.

    Devised a little plan for tmr: Going to correct the adjustment on the drums. If that dosnt work. I'm just going to put the old master back in. I'm tired of this thing not driving. I wanna get it on the road and move on.
  2. randomTruckKid

    Brakes still dont work.

    Father's suggestion. Was going to have to take it off anyway so why not replace it, with something new (and better looking)
  3. randomTruckKid

    Brakes still dont work.

    Thank you. I guess i should've mentioned. I out the thread count of the star gears in case someone was like me and just happend to know how many can come out. The difference is from me messing with one. I have a feeling the master might be bad (aftermarket one i bought). It has always, no...
  4. randomTruckKid

    Brakes still dont work.

    How far out can one of thoes star gears go? I remember yesterday it seemed like neither of my rear drums were properly adjusted. One had 8 threads out and the other had 10. But I didn't know if you could un screw one of thoes or not.
  5. randomTruckKid

    Brakes still dont work.

    Didn't work :/ Though the pedal is pretty stiff when the truck is off.
  6. randomTruckKid

    Brakes still dont work.

    Might be it. I didn't replace the wheele cylender on the driver side drum, a freind did and i saw him messing with it so he might not have put it back.
  7. randomTruckKid

    Brakes still dont work.

    I replaced my master cylender when I was doing my cab swap. I have also replaced both rear wheele cylenders and both front calipers. However. My brakes when the truck was on. Didn't work but the last inch. I decided to take the master off and bench bleed it, then re bleed (gravity) the rest...
  8. randomTruckKid

    Boat speakers in c10?

    Lol. If only the boat would float.
  9. randomTruckKid

    Boat speakers in c10?

    I'm having a dumb idea time again... basically I want to have louder speakers/subs in my truck, however, i don't particularly want to spend much money on it right now. I have a boat that happens to have a amp (rockville phenom rxmf4) that is paired up woth 4x rockville 500w speakers. I'm...
  10. randomTruckKid

    New wiring dosnt do anything when key is on.

    Randomly decided to try my tail light... and all it's functions work! However I don't know why my gauges aren't coming on.
  11. randomTruckKid

    New wiring dosnt do anything when key is on.

    Disconnected the 1 const on the gauges and suddenly it just reads open loop... yay
  12. randomTruckKid

    New wiring dosnt do anything when key is on.

    Ah. So I probobly don't have a short then I haven't tried to turn anything on since I fixed my grounds and I've never tried to crank the truck
  13. randomTruckKid

    New wiring dosnt do anything when key is on.

    So what I'm getting from that i do have a short. Because they key was off when I took that pic and I don't have barely anything hooked up yet. Only thing I belive that is hooked up right now that would have constant power is the dakota digital box.
  14. randomTruckKid

    New wiring dosnt do anything when key is on.

    So I've done some testing and fixed my grounds. But I think I have a short somewhere? Info is a little confusing. It seems I shouldn't be getting a reading or when I touch the positive and neg cable with my ohm reader. (The key off) But I did (as you can see ablove) it's on the m ohm setting...
  15. randomTruckKid

    New wiring dosnt do anything when key is on.

    Where all is the cab supposed to be grounded? All I have/know of is the 2 wires in the back of the cab that jump to the frame.
  16. randomTruckKid

    New wiring dosnt do anything when key is on.

    Guess I never said when I made the original post. It is all new harness. 27 circuit painless performance one.
  17. randomTruckKid

    New wiring dosnt do anything when key is on.

    Finally got to the point where I can try to test my new wiring. I wired pu the frame with the body off. Then yesterday I put on my new cab, from a 1984 c10. Been wiring it all day today but I try to turn it on and nofthing happens. Currently the only thing on is the cab. So no exterior lights...
  18. randomTruckKid

    Ac unit 84 cab.

    Keeping this short. I need some sort of new "factory" ac replacement for my 84 c10 cab. Ac is different than on the 79. Unless I can make the 79 ac fit? I also don't need a compressor. I want to get vintage air which is 1800$. But I am getting a no. I don't mind being told it would be more...
  19. randomTruckKid

    Sway bar for lifted c10

    Good to know.
  20. randomTruckKid

    Sway bar for lifted c10

    35". And it's about a 5 inch
  21. randomTruckKid

    Sway bar for lifted c10

    What makes that one so much more expensive compared to the 150-300$ ones I see? That are also thicker?
  22. randomTruckKid

    Tubular on the c1oh

    That's exactly what I was going to do. I don't particularly want to go off cutting crap off for tubular or moving the shocks. I prefer it to be reversible. If I ever want to de lift it or someone else does.
  23. randomTruckKid

    Tubular on the c1oh

    Well it's also got 35" tires on 15" rims. And the current springs might be kinda weak. They're ebay springs. Can you send a picture of the drop bracket? In my opinion I think a sway bar could do it for the truck. And if not some c20 springs could.
  24. randomTruckKid

    Tubular on the c1oh

    Ive got a few questions. Which i belive I've asked on my build thread but i wanted to expand and explain here. So for thoes who don't know i have a lifted 79 c10. 4.5" spindle lift. It has quite alor of body roll, but no sway bar. I have some peeps telling me I need to do a tubular upper...
  25. randomTruckKid

    700r4 leak

    So something like this? https://a.co/d/bnEzDkH

Latest posts

Forum statistics

Threads
45,558
Posts
986,230
Members
38,644
Latest member
FenderBanger
Top