Search results

  1. rpcraft

    Front door hinge spring replacement

    Why in the world is anyone still using photo bucket?
  2. rpcraft

    Front door hinge spring replacement

    Can't beat flat rate so much they no longer do it...
  3. rpcraft

    5.3 build pushrod question

    I think summit has an AFM and DOD delete kit that includes everything you need to do it. Not sure what is included
  4. rpcraft

    Front drive shaft is hitting

    You can get new rubber mounts online from all the etailers... I would recomend getting some of the poly ones for the transmission though, especially since it looks like he has a lot of leakage going on.
  5. rpcraft

    77 K10 LS Swap

    Great to hear man. It's a shame you had to spend the extra time with the driveline stuff but at least it worked out in the end.
  6. rpcraft

    Side glass installation

    Ah thanks. Late night and LMC has a different way of listing the differences than most other catalogs.
  7. rpcraft

    Side glass installation

    Just got my solid windows cut out of the spare K5 top I have. I was going to try and remove them without cutting but the old gaskets were so hard I figure installing them is going to require new gaskets. My question is has anyone ordered the gaskets from LMC and do you know what the difference...
  8. rpcraft

    77 K10 LS Swap

    Well, shit man, sorry about that. I guess that is one of those differences very few people find out...
  9. rpcraft

    small block to big block radiator

    Yeah but they seem to think the new fans are made of platinum or gold for some reason. Wrecking yard is pretty affordable to me, plus you can get the relays and harness and just wire it in like an OEM piece.
  10. rpcraft

    small block to big block radiator

    Nice, I am going to be using the Spectra OEM replacement for the LS trucks and I have not settled on the shroud yet. probably the OEM with an extension piece, depending on where it lines up with the fan. In the long run though I am probably going to swap to an Electric dual fan setup, using...
  11. rpcraft

    small block to big block radiator

    what's the donor on that shroud? Looks nice and tight on that Rad!
  12. rpcraft

    700R4 and Correct Gearing

    I'm not worried so much about me doing it or about it accidentally going into 4wd. I'm worried about other family members who do not pay attention to things I say, lol. Call it a life lesson if you will.
  13. rpcraft

    2" or 2.5" Lift

    I would go with the ORD parts and take their advice in order to have a good riding truck regardless of what amount of lift you end up going with.
  14. rpcraft

    700R4 and Correct Gearing

    I was thinking down the road of going with a 4l80 but it's just too much work to swap for now. I figure if I burn up the 4l60E I have then I will look into it more. I was hoping to avoid the shift down from the slight hills, like you mentioned. On my setup its an LS swap so the trans can be...
  15. rpcraft

    50W in a 454?

    If you really want to know what the oil is doing maybe you should pop off the valve covers and the intake and see what you have going on there. Buildup will be there if it's not been oiling well and if you find nothing visually wrong then its just a matter of keep on using what has worked.
  16. rpcraft

    700R4 and Correct Gearing

    Maybe I am not used to hearing about cruising speeds for 500 horsepower motors but why would 2700 at 70 sound good to anyone if a modern 400 horsepower truck does 70 at around 1700 to 1900 rpm? I'm just curious because I am trying to make up my mind what the best gearset will be when I go to...
  17. rpcraft

    241c transfer case

    Just curious why you are using the pass through version? Trying to stick with the stock speedo? if so just find a electric unit out of a 90-91 Blazer, burb, or crew cab 4wd and you will simplify your problems. You can usually find the clusters for around 80 to 100 bucks.
  18. rpcraft

    241c transfer case

    This is the unit that I have seen people say to use (that is not a pass through).. Some tunes will say it doesn't work but it is often because they do not know how to set the PCM to read the 8K signal (or maybe just do not like to)...
  19. rpcraft

    241c transfer case

    Also might be worth usign a multimeter or some other test device to measure the output that is coming off the current VSS. Might be dead for all you know?
  20. rpcraft

    241c transfer case

    I can't accept that he is saying they can not account for zero speed input because of the fact that it can be tuned on the PCM for zero on manual transmissions with no VSS input (2wd or otherwise) and then it will not have the idle stop/cut out I think you are talking about. I am going to make...
  21. rpcraft

    241c transfer case

    The problem with using the output on the 4l80E is your truck is not going to do 4wd properly without a tcase output to match it as well from what I have been told. something about it not being able to match engine speed to the proper output shaft speed. I am not a tuner though but plenty of...
  22. rpcraft

    small block to big block radiator

    Probably because the general knew about it's penchant for running hot.
  23. rpcraft

    77 Rear Speakers

    I believe the difference in where the seat belt mounts is due to the difference in a half ton vs one ton truck. I'm not 100 % on this but I think there used to be a provision up until the mid 90's where Hd trucks could be operated without seatbelts and this affected where they put the shoulder...
  24. rpcraft

    New here from Texas

    Your going to need a bigger gas can for that big block neighbor, lol!!
  25. rpcraft

    What is this other relay plug for?

    Train horn relay!!

Latest posts

Forum statistics

Threads
45,566
Posts
986,358
Members
38,654
Latest member
boarder421
Top