Search results

  1. rpcraft

    K5 rear window motor - Replacement are garbage - Alternative solution

    Real good feedback. Between the body ground issues that the 80's GM's had and the fact that the the window tracks all wear out from hard/cracked and/r missing weather stripping it's ver seldom an actual motor issue. If you measure the load on your motor if it is having a really high amp...
  2. rpcraft

    Axle Swap

    perhaps you should just try a different wheel offset? Seems a lot easier because finding a slimmer axle is going to be not too easy and it will most likely require relocating axle pads and stuff.
  3. rpcraft

    1986 1 ton 454 Trans swap

    Your correct. It sure about the dodge variant but I believe in the fm it’s just Dexron 2 or something similar
  4. rpcraft

    1986 1 ton 454 Trans swap

    The 465 is a dump truck transmission. Pretty bulletproof overall, but the NV4500 can be just as reliable, and it offers OEM parts replacement and maintenance for the most part. I think if I were looking for OD and simplicity it's still the best route, plus affordable. Also on a SWB (sorry it...
  5. rpcraft

    Texas member meet

    I get it but piggy backing off the other meetups might be a good idea as well. Not sure what harm could come from it.
  6. rpcraft

    Texas member meet

    JUne 29th there is a meetup at Jonestown - https://www.facebook.com/events/564318477370358/?ti=cl
  7. rpcraft

    Texas member meet

    FWIW There has already been 2 or three meetups at car shows this season. I think there will also be a meet-up and drive in before C-10's in the park and then also right before the big meetup in Mexia in Octoboer. I know each of those tend to have a truck give away. The one in Mexia this...
  8. rpcraft

    82 K5 6.2 Axles

    lol
  9. rpcraft

    82 K5 6.2 Axles

    Pretty sure to most of us 6.2's are the definition of grunt already, just a different definition, lol
  10. rpcraft

    82 K5 6.2 Axles

    I think we are mostly talking about squares and the corresponding 10 bolt axles.
  11. rpcraft

    82 K5 6.2 Axles

    Makes sense now.
  12. rpcraft

    Gearing Help

    Pictures or it didn't happen!!!
  13. rpcraft

    Transfer Case

    I don't think the NP203 used trans fluid that was shared with the automatic transmissions but rather something in the range of motor oil, not gear oil though. I'm not 100 % sure on the mix though and can't really verify that.
  14. rpcraft

    82 K5 6.2 Axles

    Not sure what GM was thinking or why but I have noticed that usually GM Diesel axles (like the half ton 10 bolts and what not) usually have absurdly tall gearing, like in the range of 2.72 or best 3.08. I'd avoid them unless you already have plans on rebuilding them and putting better gear...
  15. rpcraft

    Gearing Help

    I doubt you are going to be wanting to spin a straight six gm around 2800 RPM for long. I think there is some things that glossed over in the chart that people forget and that it doesn't compensate for OD, and the thing about that is OD is not for optimum power, but rather for optimum cruising...
  16. rpcraft

    K5 rear window motor - Replacement are garbage - Alternative solution

    Long story short the problem was more with the side rails that guide the window. Once I replaced them thing got so much better. I have gaskets for the tailgate and top which will help as well. Huge difference in the end. I did end up picking up an OEM motor and regulator so I have a spare of...
  17. rpcraft

    Post your interiors

    Kiinda Wanting to figure out if I can use one of those in my Jimmy
  18. rpcraft

    1980 K10 4x4 with 350 Rear End Need Gear ratio

    3.07 was probably one of the more popular gear ratio's put in the 4wd trucks that came with a TH350. They did put some higher numbers of 3.73's in the 700r4 trucks but 3.07's were still more popular by a wide margin. If you are doing maintenance you should plan on changing the rear diff fluid...
  19. rpcraft

    Q Logic Kick Panel Enclosures

    I'm not 100 % sure you can still buy them new and can only find them used from time to time but I may be mistaken. Alternatively you could get some thin plywood or particle wood, and use some fleece and make some of your own. You can youtube search fleece speaker enclosure and would probably...
  20. rpcraft

    Gearing Help

    I've seen some 2.73 front axle gears in 10 bolts. In fact I have one sitting in my garage right now that will be getting converted to 4.10 when all said and done. I think they were typically found under diesel rigs but I am no eggspert on what came in what (gas or diesel). Imagine how much...
  21. rpcraft

    Diesel rear axle help.

    I do not know tis 100 % but I think technically you can take some of the gov lock parts out and it essentially functions as a open diff, not optimal if you need a locking diff but better than doing a major amount of work on something you most likely want to change out in the future. Doing that...
  22. rpcraft

    1 inch lift enough for cab swap?

    I'd try measuring before guessing and installing something you don't need. You might find it all fits without a body lift. Just foot for thought.
  23. rpcraft

    454 with 10 bolt rear end?

    If he has the right gearing it will be ok for daily driving, towing, and mild wheeling. If he puts the truck in a situation where the tires are wedged in and using some serious torque or like the gas pedal is a light switch then yes, there is going to be some carnage, lol.
  24. rpcraft

    77 K10 LS Swap

    There is a sensor they have that is just VSS and also another one that is able to do both. In my case I have a cluster out of a 91 4 x 4 Blazer so I'm using the Dakota SEN-01 on my swap. It will be setup to run to the PCM and then the PCM provides the output to the VSS speedo.
  25. rpcraft

    Rear Pinion Seal

    I would jack the back end up, take the tires off, and measure with just the axles if there was no other option. In that regard go for the greatest rating on the drag range.

Latest posts

Forum statistics

Threads
45,570
Posts
986,618
Members
38,663
Latest member
seattlesquare
Top