Search results
-
73 grille color
From all I've ever seen they are solid 1 color- MarineOne
- Post #2
- Forum: Paint and Body
-
-
-
Swapping seats
I think the forward mounts are the same but rears different. Mine had a bench from a g30 in it though so I'm not sure 100% what holes are new and old but front lined up on factory threaded for correct bench -
-
Fuel Guage issue. Not the average one.
Is it the correct ohm fuel level sender? There's multiple options 0-30 0-90 33-240 That's where I'd start?- MarineOne
- Post #2
- Forum: Tech Discussion
-
Steering column ideas
Unknown but off road design sells one that does- MarineOne
- Post #4
- Forum: Tech Discussion
-
1978 Scottsdale Drag Link Question
Is there a reason you don't convert to crossover steering? That'd stiffen it right up- MarineOne
- Post #2
- Forum: Suspension, Steering & Brakes
-
Steering column ideas
Do you know what part is loose? If it's rag joint / slip shaft area you can get one with a ujoint from a jeep xj- MarineOne
- Post #2
- Forum: Tech Discussion
-
New wheels/tires - 73 K10 w/2” lift
Wagon wheels always looked good on these rigs and that setup should work just fine. Nice they come in correct bolt pattern without having to custom order either- MarineOne
- Post #2
- Forum: Tech Discussion
-
700R4 Drive Gear looks green?
It wasn't an option factory but being nearly 40 years old it could had been swapped at some point Drive gears from th350 and 4l60 fit and a green 15 tooth was common in th350- MarineOne
- Post #5
- Forum: Tech Discussion
-
Increased Cooling with Electric Fan and Electric Water Pump
That be cool 2 row is equivalent to a 4 row as the cores in there rads are thicker Electronic waterpump willnot help your issue as at engine speed they flow significantly less water If it were me I'd get a flex fan with proper spacing a new water pump and put a bottle of water wetter in with...- MarineOne
- Post #17
- Forum: Carb Fuel Systems
-
700R4 Drive Gear looks green?
Green is an option and should be 15 tooth. Best option to know for sure is mark a tooth and count- MarineOne
- Post #2
- Forum: Tech Discussion
-
Carburetor rebuild issues
Sounds like top plate gasket is damaged or top plate is warped. Never seen that screw leak before are you talking the idle screw?- MarineOne
- Post #2
- Forum: Engine & Performance
-
cab/Body mounts
To my understanding the only difference is thickness of rad support bushings- MarineOne
- Post #2
- Forum: Tech Discussion
-
Increased Cooling with Electric Fan and Electric Water Pump
So an electric fan and waterpump will provide you more cooling at idle and low engine speeds (under 1500rpm) a good flex fan and waterpump is far superior cooling power at engine speed. That's why modern 3/4 ton and 1 ton trucks still use mechanical fans and water pumps. Also on that note at...- MarineOne
- Post #2
- Forum: Carb Fuel Systems
-
Grandpa's 85 K1500
Sure is a beauty of a truck. Love the GMC's. Story makes it something awesome. I have memories like that in my Dads 72 chevelle SS and procharged 08 srt8 challenger he had chevelle since I was 4 years old. All his cars are now mine and it's where I feel closest to him. We were looking for a...- MarineOne
- Post #2
- Forum: Introduction
-
Trailer hitch recommendations
Everything is prettymuch going to require drilling unless you find a factory original hitch and your truck had one from the factory. I recommend anything drawtite. it's all I have and will ever put on my vehicles when available. For this application part number is #41938 2" standard... -
Frame differences
Frame will work just fine and yes that's for a spare tire- MarineOne
- Post #2
- Forum: Suspension, Steering & Brakes
-
tire options for a K30 dually with 4'' lift. i
Yeah I hear you on the iroks had them a few years back. A sick 255-85-16 that's awesome for towing and tire life 40k miles or more is the Toyo m55 it's a commercial traction tire Falken wildpeak is a great option that's probably a 35k Mile tire and is more of the offroad mud style but wears...- MarineOne
- Post #5
- Forum: Wheels and Tires
-
SM465 Chatters when I get on it.
What oil are you running in the transmission?- MarineOne
- Post #2
- Forum: Transmission & Transfer Case
-
-
tire options for a K30 dually with 4'' lift. i
Are you looking for a street tire , highway traction tire or an all terrain or a mud tire- MarineOne
- Post #2
- Forum: Wheels and Tires
-
87 Smog Delete
I hope these help Transmission component should be left connected easiest would probably be to get a new pice of hose and go from that intake port to the electrical harness Pcv should be left connected aswell Pcv stands for positive crank ventilation Pcv uses engine vacuum to put crank case...- MarineOne
- Post #7
- Forum: Tech Discussion
-
87 Smog Delete
yes cap at intake on small ones and the valve cover one shoukd stay connected that's your pcv valve.(shoukd stay connected to suck vapors from crank case) If you don't want to run a pcv then replace it with a breather- MarineOne
- Post #4
- Forum: Tech Discussion
