Search results

  1. 1low4x4

    anyone know anything about parts washers?

    My dad has had this 20 gallon parts washer for years, but it never worked. I think it was given to him and after he passed away in May it was just one of the many things that made its way to my garage. Yesterday I took it out and pressure washed it, it had been used extensively back in the day...
  2. 1low4x4

    Oil Leak Pissing Me Off

    Na...oil sending unit is on the wrong Side of the motor. Got under it last night about midnight and wiped it all down clean, drove it, back under it with light, and right as i was about to give up-nice trickle from the corner of the valve cover. Gotcha bitch
  3. 1low4x4

    Oil Leak Pissing Me Off

    Ever find your leak? I'm chasing down a similar problem. I've got a nasty oil leak only when the truck is running, from the rear of the engine. This engine I just had out. I have redone the intake gaskets 3 times. Each time I use silicone, and I clean them like I should and use brake clean too...
  4. 1low4x4

    Best stock head and Aftermarket cam combo

    also, I have a pair of 906 Vortec heads for sale, but shipping to Arizona would break you probably
  5. 1low4x4

    Best stock head and Aftermarket cam combo

    voice texting types what it wants. Do you guys all have jobs? hey to the original poster, give me a while and I will post screenshots of all the part numbers I used on my vortec head swap.intake gaskets and bolts, head gaskets and bolts, intake, springs xcetera
  6. 1low4x4

    Best stock head and Aftermarket cam combo

    which is why I said by the vortex
  7. 1low4x4

    Best stock head and Aftermarket cam combo

    Na, vortec intakes on line are like 150 bucks. But you need gaskets and bolts and all that too
  8. 1low4x4

    Best stock head and Aftermarket cam combo

    Man im all about those vortecs! Woke my truck up real nice. I went with a shit cam too...id call comp and get that 286 H cam or ehatever its called. Supposd to be real nice
  9. 1low4x4

    q jet high high idle and very rich

    Mark I took a look at your website, looks like you go through them very well. Whats pricing and turnaround Tim on something like that?
  10. 1low4x4

    q jet high high idle and very rich

    Ill clean it good tomorrow on my day off, I have no idea what jets or rods are in it but ill call my cousin and ask today what all hes done to it. Hes pretty damn handy with a q jet and this carb has Performed for me for like 6 years trouble free. I think we went through it 2 years ago but not...
  11. 1low4x4

    q jet high high idle and very rich

    hey guys, this Quadrajet has been went through a few times by my cousin, I'm not exactly sure what all he done but I know that he beefs it up a little bit to a higher CFM or whatever. Well I've been fooling with this new engine I've got end adjusting the idle, and trying to figure out which...
  12. 1low4x4

    What kind of tool box do you have at home??

    I buy mostly craftsmen. Built a lot of Shit in my time and broke some tools but cant beat the price for the wuality. I had buddies that had the snap on truck stop by monthly but they were always in debt to him. Like a car note. I don't understand why some one would pay for tools like that...
  13. 1low4x4

    What kind of tool box do you have at home??

  14. 1low4x4

    dual shock option help

    Hey guys...was told I have a dual shock setup on the front. Two frame mounts up top and a single bolt with a stud on bottom. I'd like to put all that back, but don't know what to buy. Anyone have any experience with these? I'm also concerned with the shock length since I have a 6" lift. Any help...
  15. 1low4x4

    finally found a decent square. lots of help needed.

    I asked for a number. Will post when he replies
  16. 1low4x4

    finally found a decent square. lots of help needed.

  17. 1low4x4

    finally found a decent square. lots of help needed.

    Nice, look on squarebody classifieds on Facebook there is a guy posted a stepsidebed for sale in hico tx.
  18. 1low4x4

    Another a/c firewall

    Chengny- what did you use to seal the evap housing back to the firewall. Rtv, duct seal etc?
  19. 1low4x4

    Another a/c firewall

    a crappy drawing of what I'm talking about. This cab pictured is an 85 2 wheel drive, the other cab is an 82 4 wheel drive. But these evaporator boxes or mass produced, I will check the measurements tomorrow and if they are the same then you are good to go
  20. 1low4x4

    Another a/c firewall

    as for good places to measure from, if you want I will take the time and get some. Just take a level and from the right side of the blower motor circular hole pull a measurement 2v evaporator box hole, then from the bottom of the same circular heater blower hole, pull a measurement using a level...
  21. 1low4x4

    Another a/c firewall

    here is the other firewall in my driveway. I think the evaporator housing would seal fine as long as you didn't cut the hole way too big.
  22. 1low4x4

    Another a/c firewall

    here's a picture of my AC firewall. it's open currently right now if you want any measurements. I don't see why it has to be so precise, within a quarter inch would do fine I would think. then you could fine tune it to fit the units you get.
  23. 1low4x4

    questions..head work, cam sizes...etc

    I called comp today and they said I should use the cam below that one...my current cam is 204/214 duration @.050 and the one they spec'd is 212/212. But yours sounds Better and makes Better power probably. Did you have to use a stall converter?
  24. 1low4x4

    Dad has cancer-help me fix his AC please

    Thank you shane
  25. 1low4x4

    Dad has cancer-help me fix his AC please

    Hey guys, dad passed away may 5th of this year from the cancer. Plus the chemo. I gave my brother zach the truck, who was very proud to have it and is taking great care of it.

Latest posts

Forum statistics

Threads
45,566
Posts
986,358
Members
38,654
Latest member
boarder421
Top