Search results

  1. Craig 85

    Vent window adjustment?

    Sorry guys. I have not installed it on my truck as I haven't painted it yet. I did add it to my '77 K5 back in the early 90's with a factory GM part. I'm old enough to have been able to buy new parts from GM when they were still cheap. The screws help it from shrinking over time and pulling...
  2. Craig 85

    Vent window adjustment?

    The secondary trim goes like this. I believe it was only done on 79-80 trucks. I purchased the OEM style that screw into to door on the ends.
  3. Craig 85

    Cab roof lights

    Gotta love when they come from the factory...
  4. Craig 85

    15x10 OE Pickup 71-87 5x5

    David's Rally Wheels shows them for $205 each. Scroll down a bit to 42 Series. https://www.davidsrallywheels.com/wheels
  5. Craig 85

    What have you done to your square lately??

    One last thing I'll add. The OEM GM fuel hose is no longer available. I used this hose from ZIP Corvette (CZ-804) with a small metal section added in the middle to make the curves over the frame.
  6. Craig 85

    Square body full sleeper cab

    Kind of like the old Centurion Ford vans.
  7. Craig 85

    Windshield gasket with groove for trim?

    I would venture to guess yes, but the rear would require you to cut the rear lower corners if it only came as a single strip. I never like the chrome lock strip, so I switched to black. For the rear I just used the standard window gasket, as it was less expensive than buying the gasket and...
  8. Craig 85

    460 BBC Mechanical Fuel Pump

    That's what I used, but they changed numbers after I received the first one to the Carter version and said it fit. It did not though. I used the 41615 on mine.
  9. Craig 85

    Show me your 8 lug wheels!

    US Mag still makes the Indy U101 for our trucks. Its available in a 17x10. Part #U10117008245.
  10. Craig 85

    Tachometer replacement thoughts

    Mine still works, runs a little slow though. I’ll have to look into cleaning it.
  11. Craig 85

    Axle/Suspension Piece Identification

    They used them on the Fall Guy mid-engine jump truck.
  12. Craig 85

    What is this??

    Good catch. I didn't look close enough at his picture to see it's the driver's side. My '85 K30 has it on the driver's valve cover too. Here's the some pics of the other related items.
  13. Craig 85

    Tachometer replacement thoughts

    Yes vacuum.
  14. Craig 85

    Tachometer replacement thoughts

    They should fit no problem. Just don’t know how they wire up. Hard part is finding one. It’s a popular swap.
  15. Craig 85

    What is this??

    Do you have one of these factory aux fans behind the grill? If so it could be the relay to that. There's a sensor on the passenger head that triggers the fan. I added it to mine, but it is the correct location using a Napa parts.
  16. Craig 85

    Pulling Sucks--2001 Suburban 3/4 ton--6.0

    If you're on Facebook join these groups, it's specific to 2500 Suburban owners. Very good groups, basically the same people in each. People behave very similar to this group. 2500 (3/4-ton) Suburban/Yukon Owners Suburban/Yukon XL 2500 (3/4-ton) Owners
  17. Craig 85

    Tachometer replacement thoughts

    I looked back at what your were replying to. That 4000 RPM tach and fuel gauge is out of a diesel C60-70 truck. The gas C60-70 had 5000 RPM tachs.
  18. Craig 85

    460 BBC Mechanical Fuel Pump

    The PO of my truck ran into this problem when trying to install a new fuel pump. I have the 3 port style, but it shows the height difference. TRW used to be the supplier for Napa, now it is Carter. Their catalog is wrong, but I've heard it's been corrected since I did mine 5 years ago. The...
  19. Craig 85

    Dual stabilizer install

    Pictures help. Back in the day my dual stabilizer was a stacked style (I'm old). Is this a horizontal unit? I had one like this, but it mounts reverse of this picture.
  20. Craig 85

    Need H6 AC compressor brackets for 454

    Thanks for the compliment. I’m lucky the truck was parked for 10-11 years before I bought it. It also helped that at the time all those photos were taken I was living in California and had to smog it every 2 years. Everything on there was required to pass.
  21. Craig 85

    Need H6 AC compressor brackets for 454

    It's been 4-5 years since I installed the pump, but in the last picture, I had to transfer that rusty looking nut from my old pump to this new one. I think the other had some type of stud on it. When I had the original A/C brackets on (below) it the pump would not have gone on had I not swap...
  22. Craig 85

    75 k10 lift kit

    You may be able to remove some of the front leaves. The problem you may run into once the spring relaxes from removing extra leaves, it may be too long and the rear spring eye will be too close or sitting on the frame preventing shackle movement.
  23. Craig 85

    Need H6 AC compressor brackets for 454

    A few more.
  24. Craig 85

    Need H6 AC compressor brackets for 454

    @Squarebody1985 here's those pictures. FYI my truck is an early production '85 (11/84) with a single smog pump set up. Trucks produced after 1/1/85 had dual smog pumps, factory stainless headers and a different A/C compressor set up. I'm not sure it those power steer mounts were different.
  25. Craig 85

    Rear Bumper difference?

    I’m pretty sure the van bumpers are wider than the truck bumpers. Track width is 3-4” wider.

Latest posts

Forum statistics

Threads
45,562
Posts
986,311
Members
38,648
Latest member
Stickman
Top