Search results

  1. T

    Who sells Torx style door strikers?

    I've done a lot of searching and can't find new original style door strikers that take Torx to tighten. All I see are the Allen head style. I know both will work but I want to stay with Torx if at all possible. Any ideas? Thanks.
  2. T

    Bottom A/C compressor unthreaded holes vibrating

    See if this comes up: https://www.chicagomusclecarparts.com/products/copy-of-ac-compressor-stud-rear-v8-78-88-chevy
  3. T

    Adding AC after ls swap

    I see this is a week or so old but here's the bracket that I went with to retain a factory LS truck compressor relocated to the top: It's from ICT Billet. Just note: You don't have to run the idler pulley that's in the pic at the top. You do have to buy a different pulley for the...
  4. T

    Panel Gaps/ Body alignment

    I'm doing the same thing on my 78. Where the hinges bolt to the cab there should be enough adjustment to move the door towards the rear. I hope you have at least one helper, it makes it a lot easier.
  5. T

    Not good at ac I need help

    What part of Texas are you in?
  6. T

    Not good at ac I need help

    I had a 73 with CCOT sytem also, I think POA was the previous body style.
  7. T

    Anyone leave their door springs off on purpose?

    Thanks. I did mean grease the rollers while using the springs. I ground off the end of the roller shafts and removed them so I could blast the hinges and clean/grease them up good. I replaced the wave washers on the rollers with some I found at Mcmaster Carr since some were in pieces. I just...
  8. T

    Anyone leave their door springs off on purpose?

    I just got done rebuilding my door hinges using oversize bushings and new pins. My replacement doors are near perfect with no cracks around the door hinge area. My old doors had cracks around the door hinge area. I'm thinking about leaving the S springs off so the doors won't have the...
  9. T

    Anybody know the size of the factory sport mirrors?

    Well, I got the AMD sport mirror in and it measures much smaller than the advertised 5x8 so I guess it's the factory size which is fine. I have a set of the "dumbo's" and they measure 6 1/2 x 9". I'm checking into the 67-72 mirrors now.
  10. T

    Windshield seal/rubber replacement. is there a preferred brand or is all the same?

    I see this is a couple of months old but Summit Racing carries a lot of the Precision rubber seals.
  11. T

    Anybody know the size of the factory sport mirrors?

    I decided to go with factory "sport" mirrors, I believe they're called D49 option mirrors. One vendor states the mirror head is 5 3/4 x 4 1/2" (this may be the factory size). However, AMD has some that states theirs is approx 5" x 8" which is larger and I like that better. Can somebody...
  12. T

    Mirror quality question

    Do you remember what name was on the box? I'm thinking there may only be one place making them and distributing them out.
  13. T

    Mirror quality question

    Ok, I'll take some
  14. T

    What's the factory rear view mirror size?

    I know this is a couple of months old but did you get an answer on the size? I got a 78 that I can measure.
  15. T

    Door Hinge Spring Replacement

  16. T

    Door Hinge Spring Replacement

    What year are the hinges in the pics?
  17. T

    Mirror quality question

    Yes, it surely sux. I originally wanted to use the "dumbo" mounts with the 97 Dodge power mirrors (that look similar) But even being electric and adjustable when you close the door the whole thing would prob still move. I'm leaning to going to the small "sport" mirrors that some came with...
  18. T

    Mirror quality question

    Thanks for the reply. I didn't see any part logo since I ordered from Summit Racing. These aren't really all that bad and I would run them on anything other than this particular truck. I've looked at many other options but don't really like any.
  19. T

    Mirror quality question

    First off I did do a lot of research and decided to post this since things change constantly. I bought a pair of the "dumbo" mirrors from a AMD and they came in a box with another non heard of name. I bought the stainless version. I could have made these work but the cover that slides up...
  20. T

    Door hinge question:

    Thanks for the reply. I thought about just buying new ones, but I don't trust the quality, especially since the factory ones aren't that great themselves.
  21. T

    Door hinge question:

    The little wave washer came out in two pieces. I don't see why the wavy washer has to be there, I'll just press and tack and call it good, thanks.
  22. T

    Door hinge question:

    Ok, I've searched the internet and found nothing so here goes: I disassembled and sand blasted my door hinges and one of the little wavy washers for the spring rollers fell out. These are staked in. Does anybody know if there is a kit or fix for these rollers? These are the two rollers on...
  23. T

    Catch Cans

    Not sure about plumbing on the LS engines, I'll be doing one on a 6.0 soon. But I have two Hemi trucks that have the cans and I get about one ounce every oil change at 5k miles. I'd say they are worth having. Sorry I'm not any help to your question though.
  24. T

    Brake Booster Vac Hose Size

    I'll measure one when I get home this afternoon, maybe somebody else will answer before then. I thought they were 3/8 just by memory, which isn't saying much.
  25. T

    How do I get into the buy/sell section??

    I may get there today, ha.

Latest posts

Forum statistics

Threads
45,561
Posts
986,253
Members
38,644
Latest member
FenderBanger
Top