Search results

  1. Lu Blunt

    79 k30 steering rebuild

    Ok. Thank you, I really appreciate your help. The psc box was installed with the crossover. I have a new psc box sent as a warranty replacement. I didn’t want to install it untill I was sure something else wasn’t causing the problem. I will have the new steering box installed and report back
  2. Lu Blunt

    79 k30 steering rebuild

    I had the kingpins replaced a few years ago. Idk about the lower the bearings. The truck steered like butter even at a stop you could easily turn the wheel with one finger. After the crossover install the steering wheel takes a lot more effort to turn and seems jerky going down the road. feels...
  3. Lu Blunt

    79 k30 steering rebuild

    With the stabilizer off and the wheels on the ground it’s hard to steer. With the stabilizer off and the wheels off the ground it’s much easier to steer. I’m running this stabilizer https://www.amazon.com/Bilstein-33-170794-Monotube-Steering-Damper/dp/B009FU7ELE
  4. Lu Blunt

    79 k30 steering rebuild

    Copy that. I’ll report back in just a few minutes
  5. Lu Blunt

    79 k30 steering rebuild

    I removed the draglink from the pitman arm and the steering wheel was 100x easier to turn
  6. Lu Blunt

    79 k30 steering rebuild

    I will disconnect the draglink and see how the wheel turns. I appreciate the help. I have thought maybe something isn’t right with the new steering box
  7. Lu Blunt

    79 k30 steering rebuild

    Got the cooler mounted, all the hoses ran and fittings tight. Took my time bleeding the power steering. I have brand new tires on the front. Took it for a test drive this morning. Steering is not any better. Still hard to turn and steering wheel jerks itself back n forth going down the road. If...
  8. Lu Blunt

    79 k30 steering rebuild

    Time hasn’t been on my side. Hopefully I can make some more progress today. So far I have the new pump mounted and pullie pressed on. The high pressure line from pump to hydro boost is done. I had the reservoir mounted to the radiator support. But psc/ord recommended it being closer to the pump...
  9. Lu Blunt

    4x4 Crewcab weight

    My 1979 k30 crewcab dually flatbed with tool box and me in it weighs 7240lbs
  10. Lu Blunt

    79 k30 steering rebuild

    Hopefully I can get everything installed this weekend. I have a brand new steering box psc sent me under warranty. if the new pump doesn’t fix the steering effort, I will swap steering boxes.
  11. Lu Blunt

    79 k30 steering rebuild

    I was told “that’s how the truck drives with the parts you have on it.” Also was told “it was bled within reason.” Not sure if the factory pump is not enough to make the new steering happy or if driving for 50 miles low on fluid burned up the current power steering pump. I ordered the psc...
  12. Lu Blunt

    1979 Crew Cab Dually 496 - Tire Wizard Needed

    235/85 vs 215/85. I’ve had the 235/85r16 loaded heavy no problems
  13. Lu Blunt

    1979 Crew Cab Dually 496 - Tire Wizard Needed

    I have a few squarebody duallys and have ran 235/85r16 on most of them. What tire pressure are your running? Gotta keep the pressure high so the side walls don’t touch on heavy loads. Here’s a pic of my 84 k30 with 215/85r16. Its sitting alittle low due to worn out leaf springs. And a pic next...
  14. Lu Blunt

    Electric fuel pump suggestions - For Carburetor

    I replaced my mechanical pump with the edelbrock 17303 and have atleast 1000 miles since install. I’m not running a regulator. No problems driving. No problems supplying fuel low or high rpm. Ran the tank dry twice n pump still works no problem...
  15. Lu Blunt

    How Fast Can A Squarebody Go?

    I daily drive my 79’ k30 crewcab dually. Has stock 350/sm465/205 with 4.10 and 235/85. Old dually will do every bit of 90mph at 4000rpm. Closer to 100mph on the down hills. Don’t think there’s any power after 4k rpm. Just keep my foot to the floor and the truck will run 80mph all day smooth n...
  16. Lu Blunt

    79 k30 steering rebuild

    ORD said the crossover kit should not increase steering effort. They also said I should be ok with how the plates are welded. Installer said the truck pulls left when braking because of the push style steering stabilizer. They said the plates were welded so they would never move. As for the...
  17. Lu Blunt

    79 k30 steering rebuild

    Not sure why they welded the plates like that. I see the instructions from ORD say to DO NOT WELD THE ENTIRE CIRCUMFERENCE so you are correct. Shop was recommended by off road design. I will contact them and see what can be done about the plates. Also figure out why it takes excessive effort to...
  18. Lu Blunt

    79 k30 steering rebuild

    Could it be alignment? The steering wheel returns to center more aggressively than before. Almost like you’re winding a spring when you turn the steering wheel to lock. when I’m driving the trucks tries to follow the grooves or ruts in the road. I’m constantly correcting the steering to keep...
  19. Lu Blunt

    79 k30 steering rebuild

    Even with the front wheels off the ground the steering wheel takes more effort than before to turn. I bled the power steering but that didn’t seem to help. I’ll have to wait till Monday to call hcp4x4. Anybody experience increased steering effort after switching to crossover steering?
  20. Lu Blunt

    79 k30 steering rebuild

    I painted the rotors n billet steer arm and tie rod with high temp flat black engine paint. something I already had sitting around. Worked out great. I got the rotors n calipers n pads n lines installed and brakes bled. The truck stopped excellent with a firm pedal feel. the next day I drove...
  21. Lu Blunt

    1979 k30 dually in Colorado

    Trucks just been sitting. I’d take $2300 if anyone is interested
  22. Lu Blunt

    1990 ChevyLight Duty 3/4 Ton

    It’s depends on the GVWR. Lite duty 6 lug 2500 is 7200# and Heavy duty 8 lug 2500 is 8600#. 8 lug 2500 was the 3/4ton frame 10.5” full floater rear nv4500/4l80/th400 trans. 6 lug 2500 is more like a heavy 1/2ton. 1/2ton frame with more often than not nv3500/4l60/th350 trans but bigger brakes...
  23. Lu Blunt

    1990 ChevyLight Duty 3/4 Ton

    Nice! Should have the 9.5” sf 14 bolt rear end if it’s a lite duty 2500
  24. Lu Blunt

    No fuel to carb

    I put 100 miles on the day before I drove 150 miles. so at least 250 miles no hiccups with the electric pump. Definitely could have been too much pressure running the mechanical and electric pump together. no return fuel line on the truck. Been that way since I bought it I think the...
  25. Lu Blunt

    No fuel to carb

    Yesterday I drove the truck 150 miles to High Country Performance 4x4 in Englewood CO. The shop comes highly recommended, I’m having them install the ord crossover kit with swaybar, weld on frame repair, PSC steering box & shaft. should be done Wednesday. the truck drove great, never gave me any...

Latest posts

Forum statistics

Threads
45,558
Posts
986,230
Members
38,644
Latest member
FenderBanger
Top