Search results
-
What have you done to your square lately??
For some reason I thought they mostly used 14bolt in the civilian trucks and usually d70 in the cucv variety Id still count the cover to be shure I wouldn't necessarily trust the book because my 75 srw has a 14bolt and so does my 83 drw cab and chassis truck that has 11k gvw not Shure about the... -
What have you done to your square lately??
Should be a 14bolt FF(full floater) 2 quick ways to check count the bolts on the diff cover and if axles are bolted on it's a FF -
What have you done to your square lately??
I just removed the tank sock and put a filter inline under the truck on the squares I have now are both carb, I sold my tbi truck a few years ago never had any issues with them but now these trucks are getting older the way I see it can't be made at 40-50year old parts going bad I know you'll... -
What have you done to your square lately??
Replaced the low pressure power steering hose on the 75 then drove it around a bit looks like the high pressure hose is leaking just replaced the old oil soaked low side because I had 3/8" hose already busted the generator out and got it running hadn't run it for 6 months also dragged out the... -
What have you done to your square lately??
Reminds me of when my fuel tank sock was completely screwed possibly a issue @JamesSam -
What have you done to your square lately??
Other side bracket getting the holes drilled out made some funny looking notches in some leftover 2x3 tube to see if my idea works to brace the section of 2x3 that the gooseneck bolts up to tie into the main 2x3 that runs along the frame I think it's necessary to keep it from wanting to twist... -
What have you done to your square lately??
It's not much but I did get one side drilled out have to get a few longer bolts and some washers it's not perfect but neither is this truck lol I'm going to have some free time tomorrow I'll get some decent progress then -
What have you done to your square lately??
Keep at it man eventually you will find something awhile back I had a random sputtering and it was a combination of things one I had the original cap and rotor the rotor exploded and I didn't get all the bits out of the dizzy and there was a chunk of metal from the old rotor bouncing around in... -
What have you done to your square lately??
Also got more 5/8" hardware to upgrade the 1/2" on the truck, old vs New brackets, another hitch receiver I'm going to add below the existing one is too high but it is good for my hitch mounted accessories (crane and eventually a vise) -
What have you done to your square lately??
Some progress Remade the front brackets going to use some 1/4" scrap to make some gussets still need to drill some holes but my old drill bit the dust so I'm waiting on one to show up got a few more gussets to make for the rear 2x3 flatbed frame rail and some to the rear bumper to frame -
What have you done to your square lately??
No moving it now either I cut the wood or drop 130$ on the taller ball since I'm only about 40$ into the setup if I have to get the ball no biggie -
What have you done to your square lately??
Ended up grabbing some 2" Dom for the bull bar and some 1/4" 3x4 angle for the goose neck -
What have you done to your square lately??
Fresh photo no screenshot -
What have you done to your square lately??
It was video except picture 4 is screen shot of a screenshot now it's screenshot inception lol -
What have you done to your square lately??
Gooseneck progress cut the cross member shorter by 3in and relocated holes and you can see picture 2 it will sit flush under the bed(I think I have to get the 1" taller ball) upgrading all bolts to 5/8" grade 8 picture 4 I need to run and get some 1/4" 3in angle and re make the bracket(tried... -
What have you done to your square lately??
Thanks will do it's still pretty far north but it's been a dry winter and fires are probably gonna be bad this year my friend is about 30min south of the current fires in Southern California -
What have you done to your square lately??
Had to switch gears from the bull bar to getting the gooseneck hitch on the 83 some pretty bad wildfires near me and my buddy asked if I could get the hitch installed in case they need me to get them out of the dangerzone since he no longer has a truck starting by pulling the deck boards and... -
What have you done to your square lately??
Love that burb man looks great -
What have you done to your square lately??
These are the ones I used for the design all slightly different but the black bull bar is close to the look I'm going for -
What have you done to your square lately??
Progress on the bull bar I used 1/4"×6" plate 2ft Long each some scrap angle iron for the mounts and some 2 1/2" scrap pipe and some tabs for the lights getting dark so will continue on tomorrow -
What have you done to your square lately??
Previously Posted this on the wrong thread... so I'm making a bull bar for the 75 and scored some hella lights for the trucks and a 5th wheel for the 83 -
What have you done to your square lately??
@JamesSam glad to hear that you got it worked out :cool: also a very Merry Christmas everyone -
What have you done to your square lately??
Take the air cleaner off and look at the spray pattern when running, also kinda sounds like something a bad MAP sensor or TPS/IACV could do don't forget the basics timing,cap, rotor, plugs, wires, and coil, check the vacuum advance diaphragm and springs in the dizzy don't leave out the ECU give... -
What have you done to your square lately??
Belts and fan clutch on ready for a good test run tomorrow morning
