Search results

  1. S

    Lawn/ Garden tractors/ Riding Mowers, Cool Mods and tinkering

    Image what they'd do you if you'd of typed something like "looking to buy newer beaver, prefer under 20 years old, with low hours" lol
  2. S

    Power steering fluid .. what type ?

    I would argue that in most older traditionally built vehicles it just doesn't really matter. In a hydroboost system maybe it does because of the added strain on the fluid. I do run a universal type P/S fluid in my truck but I've known guys that swore by DEXIII andd others DEX6 but we all have...
  3. S

    LS Swap Pollak Fuel Selector Valve

    I don't know squat about LS swaps but I do know plenty about the tank switching system. At the shop we try really, really hard to get guys to go with Pollak PN 42-308P That's the valve, harness pigtail and universal toggle style dash switch. I try to get guys to let me install the switch down...
  4. S

    Softopper - I've been waiting for

    After having used it for serval months I think it's normal.
  5. S

    Softopper - I've been waiting for

    Nearly 4 months later, I've opened the back, accessed stuff from the sides, and open and closed the softopper many times. It doesn't leak a drop even when run though the car wash. It's been really great. Today I needed to haul manure, horse manure for the garden to be exact. I didn't keep...
  6. S

    Show your daily driver

    What about the square, be a fun drive in an old truck but also understand wanting to trailer or ship it...
  7. S

    Show your daily driver

    I've got another friend moving to SC on the 18th of this month. Do you have an intended move date?
  8. S

    Charcoal / vapor / evap canister, how it should be set up and other information

    Do you need an external control valve. It's not absolute requirement, but it really should have one and might solve your problem. On a 5 or 6 port canister the control valve part is built in. If you run a 2 port without a control valve it will purge anytime the engine is running. An...
  9. S

    Charcoal / vapor / evap canister, how it should be set up and other information

    Page 1, let me know if you have questions... I hope that's your problem. But if it ran bad with the caps off then I doubt the canister will fix it, but at 40 years old I'm sure your old canister is not in the best of shape anyhow.
  10. S

    Charcoal / vapor / evap canister, how it should be set up and other information

    I manage Luke's Redmond Automotive. You are absolutely welcome to stop by sometime, but if we happen to be busy when you drop by we might not get much talk time, but I'll turn you loose to look around the shop especially if we have any interesting classic projects going on. Just tell whoever...
  11. S

    Charcoal / vapor / evap canister, how it should be set up and other information

    Oh your pretty close to me, the shop I manage is in Redmond.
  12. S

    Charcoal / vapor / evap canister, how it should be set up and other information

    Here's one >>> https://www.ebay.com/itm/386101290581 <<< But it's the only one I can find now. If you wanted to use the 3 port canister, you'll have the option of hooking it up as described for the 3 port on post 4 of this thread or using an external vacuum controller (I can get you P/N for...
  13. S

    Charcoal / vapor / evap canister, how it should be set up and other information

    Well the 3 port will recover vapor from the tanks, but it would not perform the other funcations, bowl vent, A/F connection and it purges a little different. There are parts (designed for Chryslers) that will make a 3 port function like a 5 or 6. Let me see if I can find a 5 port and I'll get...
  14. S

    Charcoal / vapor / evap canister, how it should be set up and other information

    Thanks for the picture. You can use the 5 port canister (can be setup as 6) GM PN#17064627DS NAPA PN#CRB 229805 The only difference is the 6th port, the solo port on the end closest to the radiator will have a cap on it that you'll need to pop off, and the port faces straight up instead of...
  15. S

    Engine sags

    I think something like this is more likely than a canister / evap problem. @vphouger should try a quick drive with the caps off. My bet is it won't make a difference but a little diagnostic test like this could save a lot of wasted time and money. @vphouger Our units are sealed from the...
  16. S

    Charcoal / vapor / evap canister, how it should be set up and other information

    How many ports are on the canister? There are a lot of specific P/N #'s that have been discontinued. These part numbers below will work in place of most of them, and if not a direct fit they can be adapted. If you have your old canister and can take a picture of it from the top I can tell you...
  17. S

    GMC Savana, Plus a Chevy Express Now Too

    @bucket thanks of thinking of me in the motel pick. I need to off load the photos from my phone, I've got a motel stay kind of recent that's worth looking at. I'll get on it....
  18. S

    Busted Alternator Bolt

    I don't minecraft, but it's good to hear from ya, hope you been doing well.
  19. S

    Busted Alternator Bolt

    I know....
  20. S

    Engine sags

    That could be a real possibility, either that or the canister has had lines off of it for so long it's totally plugged and nothing gets through it. Regardless it sounds to me like the evap system isn't working. @vphouger See this thread >>>>>...
  21. S

    Busted Alternator Bolt

    Well IDK how much trouble this would get us in but I'll take a quart shipped! Oh and it wasn't brandy, I asked my wife because I wasn't 100% sure on that and she said it was rum, and that's right. It's been that long since he moved.
  22. S

    Busted Alternator Bolt

    Yes I know you were joking, and I'm half joking / half dreaming. I ain't coming.... I use to have a friend in McMinnville Oregon that use to make black berry brandy. I loved that stuff. IDK the proof but it was soooo strong.
  23. S

    Busted Alternator Bolt

    Those emoji's are about how I feel some days at the shop. What I have learned from the various shops I've managed. My primary job is answering questions and putting out fires. The company we use for towing does not specifically give a forum discount, but they give 10% off for invoices...
  24. S

    Busted Alternator Bolt

    IDK which day you were there, but for some reason square bodies are attracted to the shop. It's rare when we don't have one in there. But right now it's only you. There is a guy at the instrument shop (not automotive instrument type shop) he's got an old 70's C20 that's had the snot beat out...
  25. S

    Busted Alternator Bolt

    That's a hell of long tow, but I do know a company that would do it. Then you'd just have to fly in when it's done! If I was a single man and didn't have to work a day job, I'd load my tools up and take a trip in the square down to see ya both. That would actually be a lot of fun. But since...

Latest posts

Forum statistics

Threads
45,558
Posts
986,231
Members
38,644
Latest member
FenderBanger
Top