Search results

  1. Rickf

    Driveshaft length for stock k15 short bed

    I've used South Shore Bearing in Quincy for driveshafts.
  2. Rickf

    Help!!! Flywheel bolts keep coming loose

    I'd look at the threads on the crank. What's the 4Bls CFM? What's your redline?
  3. Rickf

    GM 4200 I6 swap?

    Not a square, but I put a mildly souped up GMC 302 and a 4L80e in my 1937 GMC T14.
  4. Rickf

    Black Fuse-like Electrical Connector?

    Sounds like a glass fuse.
  5. Rickf

    Traction Aid for 77 K10

    I vote for dedicated winter/snow tires. I bought a set of "Claws" from TreadWright tire for my 2005 Sierra 1500. I never got stuck during "mud season" or plowing the dirt driveway which is steep in parts. On the minus side they took a lot of weights to balance and are noisy on pavement.
  6. Rickf

    vacuum pump-where to buy?

    Rock Auto, part# VCP108, $100.79.
  7. Rickf

    no electrical power

    First disconnect the battery, then with a multi-meter probe each side of the fusible link to check for continuity. There will be hotness to the starter with the battery connected.
  8. Rickf

    Rain running down metal ramp along cowl onto firewall, thoughts?

    Try it, if it works it's not weird.
  9. Rickf

    For the Handicapped

    That ladder device might work with some square tubing and welding. I installed one on the outer "C" channel of a small dump body. The ladder slid between the frame and dump body when stored.
  10. Rickf

    1986 K30 Silverado Torque converter question

    You will need a different converter and governor with a 6.2 diesel to gas swap. Not that rare, I've had several, think CUCV's.
  11. Rickf

    1985 K5 keeps breaking starters, help!

    I had a 6.2NA that ate starter bolts until I found out the starter to block brace was missing.
  12. Rickf

    Headlights upgrade.

    You might have 4 low beam bulbs, buy 2 high beam bulbs. The blue lights might be daytime running lights.
  13. Rickf

    LMC pre bent fuel and brake lines

    Pre-bent lines are also bent to fit into the packaging and don't always straighten out like needed. I put pre-bent stainless in my old 2005 Sierra, would only use them again on a bare frame. There was too much stuff in the way for easy routing resulting in mass consumption of adult beverages.
  14. Rickf

    heater issues

    I'd check for nesting materials.
  15. Rickf

    2WD to 4WD frame swap. Is it really that simple??? Help me out!

    Mid 80's C10 low trans tunnel cab w/column shift converted to 4wd with parts from a K20.
  16. Rickf

    Rear wheel drive with NP-203?

    As a test, remove the front driveshaft and see if the truck moves. If it doesn't, go to plan "B".
  17. Rickf

    Single din install problem

    or use a radio with a remote control and install it under the seat. I like the two knob idea.
  18. Rickf

    2WD to 4WD frame swap. Is it really that simple??? Help me out!

    The tunnel is different but not a problem with a column shift, ask me how I know.
  19. Rickf

    305 SBC vs 6.2 Detroit: Which would you rather?

    or a 2 stroke?
  20. Rickf

    Small block to big block swap. What do i need to know?

    Depending on the brand of headers, don't be surprised if the a/c box starts to melt. Ask me how I know. :flamingdevil:
  21. Rickf

    305 SBC vs 6.2 Detroit: Which would you rather?

    Real trucks don't have spark plugs. :cheers:
  22. Rickf

    Yet another starter issue

    Might not be related to your starting issue, does it have a block heater and do you plug it in?
  23. Rickf

    Front Fender Well Inspection Covers?

    That's one of the many access points for rodents, get some 20ga. and tin snips.

Latest posts

Forum statistics

Threads
45,561
Posts
986,256
Members
38,644
Latest member
FenderBanger
Top