Search results

  1. calredneck

    windshield washer pump

    Thank you Raider L
  2. calredneck

    Wiper Pulse Module #15598496

    I would pay to have some fixed I have 3
  3. calredneck

    windshield washer pump

    Is any buddy rebuilding these I will pay
  4. calredneck

    '75 top not 'fitting'

    I had a 75 no problem on and off
  5. calredneck

    Terrible camber

    In the old days when dinesors romed we cut one coll off same as a shorter spring we put a 1/4" shim that went all the way across it looks like you have auther problems throw.
  6. calredneck

    Noob here looking for help deciding wether to purchase a new crate motor or do an engine re-fresh

    Have a compression test done it will tell you if your enigne is good or not
  7. calredneck

    Alternator belt slip

    The new belts are not good try sanding the pulleys too and what shiftpro sad
  8. calredneck

    Traction?

    Try wate in the bad in the old days we would put a bale of straw and wet it down with water or more permeant bolt in1/4" plate in the bed wate gives you trackshion pickups are lite in the rear
  9. calredneck

    72-older SBC ram horn manifolds on a 73-up?

    I did it in the 80s on my C5 you have to make the 90 degree bend tight to the manifold or in my case the lower a arm would come up and hit the bend and eventually blow out the donut
  10. calredneck

    74 vs 75 GMC pickup grill

    Look at LMC the 73 and 74 radiator supports and grills are different than 75 to 80
  11. calredneck

    Fiberglass hood

    Try this you will be the only one with this costly but I think it worth it https://autofab.com/i-18131106-1973-1980-chevy-truck-blazer-fiberglass-drop-center-hood.html it bad ass These pic are the 73 to 80 they don't have pic of the 81 to 87 this hood was originally made by Hickey...
  12. calredneck

    Possible Flexplate and Balancer Issue

    Try and see if some one on here mite trade
  13. calredneck

    Aluminum Silverado wheels

    I use Zephyr buffing supplies you can get them at your big truck parts stores and others look up how to do aluminum polishing on internet or you tube it will take some money if you want to do it the easy way
  14. calredneck

    14 bolt semi float factory locker

    Rally wheels 5 or 6 lug 1/2 ton
  15. calredneck

    Body molding

    I am going to cut out some of the front of the 81 to 90 that is different and weld in a 73 to 80 part of the fender now I can run the early side trim and still mach the hood and grill.
  16. calredneck

    2006 Jeep Rubicon Vibration

    Replace steering damper fixed mine
  17. calredneck

    Should I go back with stock engine

    The crank sensor is to plug the hole so oil don,t come out
  18. calredneck

    Should I go back with stock engine

    I put a L31 in my 1984 k20 it looks like they are cheaper now get a duel plane jegs intake and bolts flex plate and bolts I like the way it runs more power than the old 350 good low end power one thing you need crank sensor and bolt when I got on the road then it started blowing oil I went to...
  19. calredneck

    Dash faceplate

    Look at this price is right https://www.rvinyl.com/Dash-Kits-Chevrolet-Pick-Up.html
  20. calredneck

    Refresh a gauge bezel?

    I got this the 4mm dont have pic but I think this works good not quit as good as good original but better than nothing.
  21. calredneck

    Gauge cluster with tach

    That what I did in like 81 or 82 and I needed my brother the wrench to get it right.
  22. calredneck

    Gear and tire height spreadsheet calc.

    Good good stuff
  23. calredneck

    Newbe

    What? that a little outpost on the north fork Yuba river were we turn off to go to our Gold clam
  24. calredneck

    fantasy K5

    I would like some input on a fantasy I have had for some time take a 76 to 89 K5 and put a 73 to 75 K5 top on it. I have an 84 Silverdo and a rusted out 73 with a good top. Cut the A pillars weld on the 73 top of the windshield frame and fill the bed rails behind the doors I think I am there...
  25. calredneck

    Newbe

    I will get sum more pic here is a old one not very good

Latest posts

Forum statistics

Threads
48,673
Posts
1,074,334
Members
43,347
Latest member
mo4154
Top