Search results

  1. V

    Let’s see your memorabilia?!

    It is of that series. I think it’s a 4100, but would have to look. The manual says it for the “3000, 4000, 4100 & 7100 series” Word has already gotten out though, as I’ve had several asking if I’ll turn drums and rotors, as no one does that, that we know of, in about a 50 mile radius from where...
  2. V

    Let’s see your memorabilia?!

    Not sure it’s memorabilia, but picked these up a while back. If I can ever finish my shop, they will have a good home. Got all the adapters, manuals etc also. Brake lathe Alt/starter tester from a closed down Napa
  3. V

    Rust removal

    You can also de-rust using an electrolysis setup. One of mine is just a 5 gal bucket. Water, washing soda, wire, some iron and an old battery charger. I Put 4 pieces of rebar around it on the inside, Connected together with copper wire. Fill with water, stir in some washing soda, submerge...
  4. V

    LT1 Swap Vendorss?

    The harness is pretty simple to do, as you are removing wires not needed. Brenden shows what can be removed at his link, https://lt1swap.com/lt1_pcm_pinout.htm He can also program the ecm. If you are not modifiying the engine, the black box ECM is fine. it’s very simple to make standalone...
  5. V

    LT1 Swap Vendorss?

    .
  6. V

    Any black two tone trucks out there?

    I’m considering painting my crew cab square black and charcoal gray two tone
  7. V

    Year ID - Headlight Bezel

    The quad headlamps was available in 1981 as part of the deluxe front appearance package. My 81 Silverado had quad headlights. They are even shown on the 81 brochure
  8. V

    86 C10 with bent frame

    C20 lwb
  9. V

    86 C10 with bent frame

    4wd Blazer
  10. V

    86 C10 with bent frame

    K10 swb
  11. V

    86 C10 with bent frame

    C10 lwb (these are from the KLM/Mitchell manuals) KLM manual on ebay at the moment
  12. V

    86 C10 with bent frame

    Here is the swb sheet
  13. V

    Hi, I’m new here

    Where are you in LA? I’m in SW MS
  14. V

    2.5" or 4" Lift 1986 K10

    I’ve had a 2.5 lift with 33s on my truck for over 20 years with no issues This is an old picture, as it is torn partially apart now, but should give you an idea
  15. V

    0411 pcm labels? how to order the correct one without using a vin number?

    I’ve got a 5.7/4L80 pcm I think I can send you the stock .bin file. You can download Universal Patcher and load it to any 0411 The reason I say think is, I have it on my laptop and believe I can send it as an attachment, but have never tried
  16. V

    Engine Identification?

    The 400 block is the only factory small block block with 3 freeze plugs per side (later 400 blocks only have 2 but the “boss” for the 3rd is cast into the block). Also the factory 400 harmonic balancer has a “notch” roughly 1/2 the way around it, from being externally balanced. Later 400...
  17. V

    SWAPPING 84 c10 body onto 84 k10 FRAME

    81-83 4wds (not sure on manual trans 2wd) also had a bolt in hump, but the floor was shaped different than the 73-80, 84-up 4wd pickups had a one piece floor. I parted out an 89 Blazer a while back that had the bolt in style hump, but was spot welded to the floor from the factory. Here is the...
  18. V

    Hydro Clutch Pedal Assembly...from an S10?

    PM sent Yes I realize that. I’ve never had a daily driver with an automatic in 40 plus years of driving, having 3/4 & 1 tons, usually with aftermarket clutches, which were stiffer even with hydraulics. Plus, my left knee needs replaced. Sold my last gooseneck trailer a while back, so plan to...
  19. V

    Hydro Clutch Pedal Assembly...from an S10?

    Wow, for a few hundred less than what Level 7 wants, i’d sell the whole setup I plan to pull out of my truck, to include the pedals, bell, 4 speed trans, clutch, and tilt standard trans column.
  20. V

    Quad Shocks

    When GM put quad shocks on the trucks, they cut the valving/stiffness of the shocks in half. I have not found a set of aftermarket shocks valved this way. Idea was, as I was told by an old GM parts man, there was twice the oil to heat up when offroading
  21. V

    My parts truck has auto hubs on the Dana 60!

    I have a set of NOS Dana 60 auto hubs (one has a Ford cover, unfortunately)
  22. V

    NP208 Tcase housing wanted

    Think I have a spare front half. Let me look this afternoon.
  23. V

    opinions on my LS swap setup

    I’ve got a 2000 Tahoe 5.3/4L60 that is factory drive by wire. DBW was included in the RPO NW7 Traction Control system.
  24. V

    Issues with being stood for a long time?

    My 84 sat for 9 years without being cranked. I put 2 batteries in it and drove it home. Didn’t take long for me to get the old 6.2 going.
  25. V

    Are locking hubs factory or personal add on?

    They even made auto hubs for the Dana 60 after 81. Here is a NOS set I have (one has a Ford cover, but other than that, they are the same) And from the 1981 pickup brochure

Latest posts

Forum statistics

Threads
48,673
Posts
1,074,340
Members
43,349
Latest member
samelthecamel19
Top