Search results

  1. Dmack

    Hydroboost front brakes locking up after heating up

    I had the same issue. Cracking the caliper line helped me get home, but would happen again at random times. Finally traced it to the master to hyrdoboost interface. I loosened the nuts securing them together and and it released the brakes. I played with spacing and found a spacer made out...
  2. Dmack

    Missing piece?

    https://www.ebay.com/itm/224924024371?_skw=th350+linkage+bushing&itmmeta=01KVNJCP73YZ32HFAJJZEMHHF7&hash=item345e843e33:g:Z7MAAOSw4VViTYuJ&itmprp=enc%3AAQALAAAA0GfYFPkwiKCW4ZNSs2u11xCJuwaTvjRdPTeRub%2FD1Nu7yErdoJ9J8EqYuTPooRa6vujzmPa%2B4eUJDAeyFfHBSiZWLT%2FlceW%2BqztCzsS9o1UbaIYm4wqlcQvjaktHOeUzM...
  3. Dmack

    What did I do wrong? NV4500 Swap Issues

    It looks like the throwout bearing is grinding in the clutch disc hub. Any chance it's the wrong disc or possibly the disc is installed backwards?
  4. Dmack

    TV & Throttle bracket with 1406 carb

    Easiest way to check is to have someone push the pedal to the floor and hold it. Then go to the throttle lever on the carb and see if it will move any further. If it does, I don't see how changing a bracket would help. You need more travel in the pedal arm. I would try bending the pedal arm...
  5. Dmack

    Help with fuel guage please

    3 o'clock means you have an open circuit. Best i can do.
  6. Dmack

    What new tools have you got lately?

    I modified mine with bigger wheels, and made handles that stick out the front (easier to lift the smaller front wheels and roll on larger pneumatic rears over gravel and uneven surfaces), as well as a tall handle loop on the front for pushing around. And horseshoes welded on for hanging musc...
  7. Dmack

    Driving lamps/Fog lights? Anyone running them on their c10?

    I would see if they would fit behind the grill. If they do, wire them temporarily and see if they still put out enough light to be worth mounting there. I don't think they would fit the look of your truck out front, which looks great as is.
  8. Dmack

    wireing Diag for 6 port Vavle

    Try this
  9. Dmack

    Fuel problems continue

    Simple question...is the pushrod in the block linking the cam to the fuel pump?
  10. Dmack

    Straightening the bed with frame and cabin

    There is some play with the bolts through the mounts. You will just have to loosen them and experiment. I would spray some rust penetrant on them and let them set for a day or so. If you can get a torch in to heat the nut up prior to trying to turn it would be a bonus. Its common for the...
  11. Dmack

    Novice restoration on ‘72 c10. Launch code activated!

    Welcome. Easy trucks to work on. My son has my old 68, and I'm working on a 70 now. If you haven't found it yet, 67-72chevytrucks.com is a great forum too.
  12. Dmack

    Brake Booster question...

    That was my guess before I read your 2nd post. The switch can be accidentally moved fairly easily. That's ok, we like easy fixes.
  13. Dmack

    Anyone going to the Portland Swap Meet this year (2025)?

    We have gone for probably the last 12 years or so. Always enjoyed it. Last year noticed that the Expo Center one was maybe only 50-60% of the booths that were there before. The lower parking lot was now just parking (used to be all booths), and the buildings were pretty empty compared to...
  14. Dmack

    Please help. 84 blazer

    Just a wild guess. Have you pulled the cap and made sure the cam is actually spinning the distributor shaft/rotor? Rotor center button contacting the cap when seated?
  15. Dmack

    No crank. No power at all 1885gmc 2500

    Fusible link?
  16. Dmack

    Lets see them flatbed builds!

    This is how I got my 83 k20 from my son. I'm not a flatbed fan so I took it off. My son is now talking about putting it on his 95 F350 CC.
  17. Dmack

    Rally wheel colors?

    I went to a dark metallic Grey on mine for my 70 C10 project.
  18. Dmack

    dash gauge bezel mods

    I replaced all the smaller factory gauges in mine with some basic 2" oil, volt, temp, and tach gauges. Just opened up the factory holes and taped over the printed circuit in the area so it didn't short out. Good enough for my daily driver
  19. Dmack

    Paul's 1972 Truck...

    Whenever I hear people talking about 3" exhaust, I think back to my high school days when you had to pay extra to upgrade to the big 2" exhaust. Looks great. Reminds me that I haven't done anything on my 70 for a few weeks.
  20. Dmack

    Let’s slay this dragon…

    Pegged past full means an open circuit. Look for a disconnected, broken, etc wire. You may be able to see the connection on the tank while installed at the bed gap.
  21. Dmack

    New wiring dosnt do anything when key is on.

    Just remembering, I think the headlight circuit doesn't work like a traditional circuit. Something like it's the ground side that is switched , so if you were trying to use a different harness, it's tough to integrate the two. Could be way off, so hopefully those more knowledgeable will chime in.
  22. Dmack

    New wiring dosnt do anything when key is on.

    If it's an aftermarket harness, I would guess that if you have the main power input hooked up to the new fusebox, a good ground, and a complete circuit with fuse, that circuit should work. If it's a factory harness, check the fusible links as they feed most of the circuits.
  23. Dmack

    Advice on Transmission Fluid Change for 1980 C10

    TH350, aka turbo 350
  24. Dmack

    Saginaw Steering Gear Rebuild - Special Tools?

    Do a search on the forum. When I was resealing mine, I found a few detailed posts. Vince (Vbb199 had a very detailed write up iirc).
  25. Dmack

    brake pedal has no pressure

    If you can't see any active leaks, you may have a problem with the master cylinder. Either defective or needs bleeding. Did they ever work for you or just go out? Is it a project you just got and had no brakes?

Latest posts

Forum statistics

Threads
48,673
Posts
1,074,336
Members
43,347
Latest member
mo4154
Top