Search results
-
New For Me 1985 Silverado 20 6.2 Diesel
Naches/Selah. I worked in Tuckwilla for Ingstrom machine works. I almost bought a house down there black diamond but at that time interest rates are like 17% heck no.- Craig Nedrow
- Post #185
- Forum: Introduction
-
1964 Chevy ll ls1/t56 swap
That’s part of the front end stuff that I got from Clay at Full Tilt Street Rods I could measure and see if I can find any numbers. The driver side has not been assembled yet brother, I’m doing that this morning. I’ll post photos.- Craig Nedrow
- Post #67
- Forum: Other Vehicles
-
1964 Chevy ll ls1/t56 swap
After everything is assembled and rolling around, I will scruff up everything with 120 prime and paint with PPG lama base. I’m looking for a 60 to 70% Sheen, but that will be down the road a little bit probably a couple weeks.- Craig Nedrow
- Post #66
- Forum: Other Vehicles
-
1964 Chevy ll ls1/t56 swap
So the spindle, hub, calipers and disc are from CPP Corvette big break kit for Mustang ll. I will have to use at least 17 inch wheels. My buddy Longie, ( he is a Longmire hence the nickname name) has been up and we are having fun building the car. He has some 18 inch wheels that might fit to...- Craig Nedrow
- Post #64
- Forum: Other Vehicles
-
1964 Chevy ll ls1/t56 swap
So I bolted the down tubes onto the firewall loosely, positioned them on the clip and then clamp them down. bolted everything tight, and welded in place. I then let them cool in place. so down the road I should be able to pull the whole front end off as a unit and it should line back up if I...- Craig Nedrow
- Post #63
- Forum: Other Vehicles
-
1964 Chevy ll ls1/t56 swap
Pics tell the story. Mustang two front and stuff is from Full Tilt Street Rods. Clay is a good guy, parts are quality. Have had trouble getting parts, and getting all the parts. so I’m missing a bunch of bolts to bolt it on the front clip waiting for those, but decided to continue fab up with...- Craig Nedrow
- Post #62
- Forum: Other Vehicles
-
New For Me 1985 Silverado 20 6.2 Diesel
Well Aasleson, I have an original bracket for the diesel, with the TH400. Ricko and others have said I will have to fab up something, and there are some pics in prior posts. The new transmission does have a cable on it, and was out of a square. I was going to fab up a bracket, but if you have...- Craig Nedrow
- Post #184
- Forum: Introduction
-
1964 Chevy ll ls1/t56 swap
Front end was not a perfect fit, but it fit got it straight and square will put the upright arms on today. They forgot to send bolts and they’re really expensive so I’m going to wait for those as well but at least I can get that started and then move onto the rear end while I’m waiting for the...- Craig Nedrow
- Post #61
- Forum: Other Vehicles
-
1964 Chevy ll ls1/t56 swap
Starting on assembly today, still have some body work to do, but will install the front end to make it a roller. Will show you the progress, if Jan will leave me alone.- Craig Nedrow
- Post #60
- Forum: Other Vehicles
-
New For Me 1985 Silverado 20 6.2 Diesel
Damn you Ricko, right again…. That four wheel drive trans is just to much trouble, but I have a friend now in the auto recycling biz, has a two wheel r4. Wanted 725, got him down too 600, showed up with the truck, sold it to me for 500. Just a kid but has three squares, all he drives so...- Craig Nedrow
- Post #182
- Forum: Introduction
-
1964 Chevy ll ls1/t56 swap
Went to town yesterday, talked to my buddy that owns the best body shop in town, and has a nice square as well. Told him about my K20 and asked for advice on paint, He said if the body is really nice, (it is,) to go base/clear coat. Went to the local paint (westco) store and bought a metallic...- Craig Nedrow
- Post #59
- Forum: Other Vehicles
-
New For Me 1985 Silverado 20 6.2 Diesel
Update: found a 700R4 out of an 88 square, going to check it out today, 600 bucks, ouch, but they are hard to find around here. Guy said it worked good, so Slap it in and see......Looks like I need to sell the R4 4X4 with the 208 transfer case.- Craig Nedrow
- Post #181
- Forum: Introduction
-
How challenging is replacing brake master cylinder?
I wanna have a beer with this guy, I bet they have great beer there!!!!!- Craig Nedrow
- Post #14
- Forum: Brakes
-
G series camper van forums
Geez you guys.......you don't know Jan, she gets an idea and I get to do it. I haven't worked on my stuff for weeks. It is imperative she not see this.- Craig Nedrow
- Post #67
- Forum: Introduction
-
How to turn a half ton into a 3/4 ton?
My cab was the same, found a doner, much easier. Yeah I did but all the parts, floor, inner and outer rockers etc, but much faster to swap the cab IMO.- Craig Nedrow
- Post #19
- Forum: Tech Discussion
-
G series camper van forums
Today Jan took the van in to my cousin to get the Cardon steering box installed, new hoses, and to get the oil pressure gauge working, be done tomorrow. Next up is the unistrut roof rack. Jan and I have both been really sick, ( ivermectin has helped) but are much better, and I am antsy to get...- Craig Nedrow
- Post #64
- Forum: Introduction
-
OEM "Original Equipment Remanufactured" company - any good?
Cardon seems good to me. We have Jan's 91 van down at the cousins to install a rebuilt steering box. Time will tell- Craig Nedrow
- Post #11
- Forum: Tech Discussion
-
Hydro Brake Part Number 85 Blazer
Awesome Russell. Keith, you are a gem to all of us here on the forum, grateful for your presence among us.- Craig Nedrow
- Post #18
- Forum: Suspension, Steering & Brakes
-
Bedside repair- wheel well
The only person that can't do it is the person that say's they can't do it. Sure you will make mistakes, but you will learn from them. I had a MUCH worse dent than that in my square, took a day or so, but perfect now- Craig Nedrow
- Post #18
- Forum: Paint and Body
-
Bedside repair- wheel well
The only person that can't do it is the person that say's they can't do it. Sure you will make mistakes, but you will learn from them. I had a MUCH worse dent than that in my square, took a day or so, but perfect now- Craig Nedrow
- Post #17
- Forum: Paint and Body
-
G series camper van forums
So Jan (evil step mother), cohoused my eldest daughter Leah, (evil step daughter), to help her install new window channel and wipers on the front doors. It took them ,me, about three hours, and was surprisingly straight forward. In the third picture, you can see her video on her new radio and...- Craig Nedrow
- Post #63
- Forum: Introduction
-
G series camper van forums
Before and after pics of jans Van roof, Jan did a lot of the sanding herself and then I sprayed the raptor liner on there. She helped with the masking too. What a girl.- Craig Nedrow
- Post #61
- Forum: Introduction
-
G series camper van forums
Yes HotRod. We’re just going to use one battery and see how that works. We can purchase another one down the road, but they’re very expensive. We will use a DC DC converter to lower. The voltage. Will probably put a small inverter in there as we need that for a shore power when we want to charge...- Craig Nedrow
- Post #60
- Forum: Introduction
-
New fella sweet truck!
Welcome, that holly has a mechanical choke but no cable to it, so basically not being used. Two things you can do. 1) get a sheathed choke cable and install through the firewall, and attach it to the choke mechanism, 2) buy an electric chile from holly and install that. I much preferential...- Craig Nedrow
- Post #17
- Forum: Introduction
-
New fella sweet truck!
Welcome, that holly has a mechanical choke but no cable to it, so basically not being used. Two things you can do. 1) get a sheathed choke cable and install through the firewall, and attach it to the choke mechanism, 2) buy an electric chile from holly and install that. I much preferential...- Craig Nedrow
- Post #16
- Forum: Introduction
