Search results

  1. AyWoSch Motors

    What have you done to your square lately??

    Not my work, but my old square. The guy that bought my 75 c30 is keeping me updated on his work hes doing to it. He used a heat gun and some oil to restore the door panels and the dash, and he cleaned the steering wheel gauges and bezel. Alot nicer than it was. Glad hes enjoying it more than me.
  2. AyWoSch Motors

    First post from Tahiti

    These, right?
  3. AyWoSch Motors

    First post from Tahiti

    Oh okay. Yes i do, the bolts too. I do know where those are, but ill have to look for the rods. May take me a bit with the weather, but i know i have them..
  4. AyWoSch Motors

    No start - fuel issue?

    Im about 10 miles outside of Las Vegas. Not too far away.
  5. AyWoSch Motors

    First post from Tahiti

    You mean the torque rods? I do have a set, i just dont have a clue where, will have to look around. Did you still want the hindges too, or no?
  6. AyWoSch Motors

    No start - fuel issue?

    Whereabouts in New Mexico are you?
  7. AyWoSch Motors

    No start - fuel issue?

    Another thing to think about on top of what has already been suggested, is possibly a massive vacuum leak, and it's been tuned to run with it. My 86 had a massive vacuum leak on the q-jet I had in it, I tuned it so it would run, and sounded pretty good, but I'd put 5 gallons in it, and itd...
  8. AyWoSch Motors

    K20/K30 bolt patterns

    Never knew that, interesting. Never seen a 15in 8 lug. Cool
  9. AyWoSch Motors

    K20/K30 bolt patterns

    They should all be 16in. Newer ones that are 17 or bigger are the new metric ones, and I'm not sure they ever made 15in 8 lugs, probabaly don't fit the brakes.
  10. AyWoSch Motors

    K20/K30 bolt patterns

    You're welcome.. They should fit it too.
  11. AyWoSch Motors

    K20/K30 bolt patterns

    Same exact wheel bolt pattern, youll be fine, no worries at all. They're both 8x6.5. Any chevy or GMC c20, c30, k20, k30, c25, c35, k25, k35, c2500, c3500, k2500, k3500, up to about mid 2010s i think are all the 8x6.5 standard. Also older ford 3/4 and 1 ton up to mid to late 90s, older dodge up...
  12. AyWoSch Motors

    Bumper guards

    Bumper tusks in my parts, Haha
  13. AyWoSch Motors

    First post from Tahiti

    Dug threw my bolt bin and found 16 factory chrome squarebody bumper bolts, pick which ones you want. The hindges are off my 84 cucv blazer. Swing very free, no rust. The mirror pads are for dumbo style mirrors. These were off an 84. And i picked the best of the 4 bodyline cab trim pieces.
  14. AyWoSch Motors

    First post from Tahiti

    @tahitiansoul Heres what i came up with...
  15. AyWoSch Motors

    Bumper Brackets

    Will these do? Little dirty and have some coats of paint, but if i know you thats not a concern.
  16. AyWoSch Motors

    Bumper Brackets

    I believe i have a set or 2, will have to look today. This is for 81 and newer bumper, right?
  17. AyWoSch Motors

    K20 Front Brake Dust Shields

    Sadly, i have nothing like that around here at the moment, but ill keep an eye out.
  18. AyWoSch Motors

    Donkey. Dirt track race car build.

    Yaaay!!!! its back! Glad to see it again, was wondering if you had given up on it or not. Long time no info. Nice.
  19. AyWoSch Motors

    Bvllsh!t on craigslist.

    What, does it come with a free truck attached, or what?
  20. AyWoSch Motors

    1227747 ECM

    Ill PM you.. The intake i used on mine was a stock pre 87 cast iron, spread bore, 4bbl. Stock chevy equipment. And the blot pattern layout for a 87-95 tbi heads is the same as the 55-86 small block, except the 2 middle bolts sit a different angle, i made myself a wedge washer to adapt it...
  21. AyWoSch Motors

    1227747 ECM

    Thank you very much. I suspect its not head gasket, but the intake manifold. I never touched the heads, and when it did run before, it never smoked. I swapped the intakes, from a TBI style, to a 4bbl carbuarted style. Its been modified, so maybe it warped.i lathered it with RTV when putting it...
  22. AyWoSch Motors

    1227747 ECM

    Its out of a 1987 Chevrolet Custom Deluxe V20. TBI 5.7l 350, SM465 4 speed manual, New Process 205 transfer cases, 14bolt semi float. No, i didnt remove the harness, its still in place, but its carburetored now, so most of the harness is unused and hanging there. I could cut off pigtails for...
  23. AyWoSch Motors

    What have you done to your square lately??

    Good music, and great job
  24. AyWoSch Motors

    1227747 ECM

    @RanchWelder This the right one?
  25. AyWoSch Motors

    First post from Tahiti

    @tahitiansoul

Latest posts

Forum statistics

Threads
48,671
Posts
1,074,282
Members
43,343
Latest member
Joestreml
Top