Search results

  1. mtbadbob

    Stereo help

    There are companies that make the connection harness from the Pioneer to the stock GM plugs
  2. mtbadbob

    Windshield Woes

    Yeah, the windshields are under $100, they make about $75-$100 to install, and I guess the real expensive thing is the tubes of urethane sealant. My buddy installs them in about 40 minutes.
  3. mtbadbob

    Windshield Woes

    My glass shop buddy said that's the only way they're making the Square's windshields anymore
  4. mtbadbob

    Windshield Woes

    Yeah, that's steep! I paid $275 installed in my yard for one in my Square AND my '15 HD! My buddy has a glass business and say's the square windshields cost about $75
  5. mtbadbob

    Fuel pump pushrod won’t slide into block

    Try an EZ Out to see if that sleeve looking thing will rotate, it might pull out if it does. If it doesn't, the block is probably not prepped like others have suggested.
  6. mtbadbob

    New Member - level front ‘77 k-10

    I added a Tuff Country 2" Add-a-leaf to my V20 & it worked about perfect. It's a tad higher than the rear, but once the springs get some miles on them & relax a bit, it'll be good. Definitely got the front sag out of it.
  7. mtbadbob

    For Sale

    That is super-cool! Love to have that thing!
  8. mtbadbob

    I bought a 1984 and don’t know what to do???

    Nice little shorty! Welcome & good luck with it.
  9. mtbadbob

    1987 C10 Spark Plug Gap?

    Yep, .035-.045 is a good range with standard ignition.
  10. mtbadbob

    Pissing match

    Back in high school, I made a pair of smoked plexiglass headlight covers for my dad's '79, they matched his smoked bug shield! They fit right into that recess & used the bezel screws to hold them on. It was a bad-azz looking square!
  11. mtbadbob

    Question about dash speaker hookup

    ****-can the capacitor, use the stock wires and make a pair of jumpers/adapter wires that'll plug onto your new speakers and into the factory plug if they are different. Check the ohm rating of the speakers if you can, that may be why the PO put in the capacitor. The speaker should say what the...
  12. mtbadbob

    Pissing match

    My wife gets bright-lighted constantly in her '21 Trailblazer when she has them on low beam, or when they're on the auto-dim setting. The new LED's are super-bright for sure. What p*sses me off is when truckers do it when they have 75-100 lights on their truck and their seat height is about 3...
  13. mtbadbob

    Pissing match

    You got the headlights for the 81-87 4-headlight system instead.
  14. mtbadbob

    Bvllsh!t on craigslist.

    Montana is about as bad. Big out-of-state $ run real estate prices through the roof, but the people influx is horrible! I literally NEVER leave my house without my 9 w/27 rounds. The idiot level nowadays is off the charts.
  15. mtbadbob

    Cab light question

    I believe they are daisy-chained, so the check the feed wire from the one that works to the one next to it that isn't working. Hopefully, that is the culprit and the rest of the lights will work once you get power to that light. You can check power with a 12v lighted stab tester.
  16. mtbadbob

    new to the club

    Welcome from MT! Try USA 1 Industries for the interior.
  17. mtbadbob

    Adhesive remover

    REAL lacquer thinner & a plastic scraper. Get it to soften, then scrape with plastic scraper. Brake cleaner or wax remover/degreaser should get the remaining residue off. WD-40 also works on a lighter scale.
  18. mtbadbob

    1987 Chevy R20 454 power steering reservoir hose

    Check Napa Online or Inline Tube. Napa online has pictures of several different hoses.
  19. mtbadbob

    Opinions please on possible use for zinc oil additive

    Lucus or Amsoil both make zinc additives.
  20. mtbadbob

    New wheels for 86

    What one man thinks is cool, another man laughs & gags!
  21. mtbadbob

    1976 k20 gas tank swap

    What about a port-valve switch??
  22. mtbadbob

    Greetings and seeking advice from San Diego!

    Have you ever watched Graveyard Cars?? They save a ton of that rusted-out Mopar junk!:hahano: My favorite saying..."It's only time & $$$"
  23. mtbadbob

    problems with my nuts, lugnuts

    You need to find out wheel hole diameter compared to the lug nuts. A lot of wheels have super-tight tolerances, so you just have to purchase the right lug nuts. Usually, those splined type are skinny enough to allow a thin wall socket into the wheel hole.
  24. mtbadbob

    Somebody help a newbie!

    Check to make sure you don't have a cracked spark plug
  25. mtbadbob

    Is anyone having any luck buying a vehicle from Craigslist/Facebook Marketplace right now?

    That's a pretty nice truck! The owner states tranny is a TH400, but factory code denotes its a TH350??? Still a cool truck.

Latest posts

Forum statistics

Threads
48,671
Posts
1,074,260
Members
43,342
Latest member
dudleyrushmore
Top