Search results

  1. C

    Southeastern Truck Nationals 2026

    Happening July 17-18, 2026: https://gmtruckshow.com/?fbclid=IwY2xjawS9Q35leHRuA2FlbQIxMABicmlkETFDMHdOdzZCN1MyMTlENnFvc3J0YwZhcHBfaWQQMjIyMDM5MTc4ODIwMDg5MgABHrkzYk2dC4aHAVKA_yshilf1k6o-CYVKqBCemin5mhRXwHN8vgD8YmlqRq03_aem_pQngn9g8swAe_nqmrMU6MQ I bought tickets, then sold my Suburban, so...
  2. C

    Steering column

    Not squarebody, but GM, so similar, I've used this more than once: https://www.crankshaftcoalition.com/wiki/images/d/d6/Jazzman_Steering_Rack_Rebuild.pdf
  3. C

    Chuck’s engine build thread!

    Six hours of garage calisthenics will do that to fella. Let me guess- your hips hurt from rolling around on the floor and your neck is sore from holding your surprisingly heavy head up?
  4. C

    Power Tour 2026

    Yep it happens. One solution is to have the least desirable car everywhere you stay. Or park next to a more desirable one??? People always suggest standard options: participant security overnight- kinda F's up the next day for that guy, air tags, battery disconnects, back in parking etc. Sucks...
  5. C

    Power Tour 2026

    I went for three days each in 2017, 2018, and 2024 with my sons. Long Haul w/ wife in 2021, Long Haul solo (like the whole time- no group- nothing) in 2023. Bowling Green is always a mess- there's only one road in and out. 2024 Nashville Superspeedway was the worst for me-three hours getting in...
  6. C

    Fuk u

    Is there a MoistRid? Asking for a friend
  7. C

    1987 Suburban R20 for sale

    $12,500 with friend discount. Had a couple of offers of $10-11k and said no.
  8. C

    1987 Suburban R20 for sale

    Sold today to an old friend who I hadn't seen in ten years or so. Went to a good home so I'm happy about that versus some of the yahoos I've communicated with- whew! No offense to Oklahoma or Alabama intended.
  9. C

    1987 Suburban R20 for sale

    I have decided to part with my Suburban- the reason I first joined this forum. We bought it to pull our travel trailer. I retired recently and with the option of taking some longer trips my wife is worried that the '87 might break down in say Oklahoma or Alabama - God forbid, so we bought a...
  10. C

    Suburban overhead console switch

  11. C

    Suburban overhead console switch

    Yeah those are identical to the ones I ordered. They are too short to be activated by the console button as produced- about .100" too short. Stroke for on/off is good but height from the shoulder to tip is short. I can make a little cap on my HF lathe to add the extra length, but have been...
  12. C

    Suburban overhead console switch

    I ended up ordering both pairs of switches from Amazon. The ones Terlingueno suggested showed up today. The switches are held in by a rounded keyhole with a larger and smaller diameter and a thin shoulder on the switch. The threaded portion of the old switch is unused in my current assembly but...
  13. C

    Suburban overhead console switch

    I honestly don't remember how the switches are retained in the console. Guess I can disassemble it again and take some measurements. Those do look close but may be three wire(?). Might try these: https://www.amazon.com/dp/B0CRHB91JV/
  14. C

    Suburban overhead console switch

    When I bought my Suburban it came with an overhead console loose in the back, a bracket attached to the roof inner structure, and holes in the headliner for the console. After some investigation I figured out the bracket was backwards, leading to the console not fitting right. I decided to put...
  15. C

    JW's 383 build

    Oh, do not despair, this process started last May (2025)- a good 10 months at the machine shop. I told them I was in no hurry. Waited for them to say .060" over was good, I ordered pistons, three months later still not available, ordered different pistons, blah, blah, blah. I picked up the...
  16. C

    What parts do you carry with you?

    Small toolbox, fluids (oil, coolant, brake fluid), HEI ignition module, windshield wipers if a long trip- hard to make it to the parts store if you can't see where you're going.
  17. C

    JW's 383 build

    It's an '89 or '90 block- I would have to check to be certain- two local machine shops said .060" over would be fine. Time will tell. It had been "remanufactured" once before when I bought it at .040" over, hence the .060" over. As filthy as it was I hoped it was untouched but that was not the case.
  18. C

    JW's 383 build

    Understood- cleaning, crack checking, boring, decking block and heads, stroker clearancing, cam and core plug install hit me for $1025. Still have to get it balanced. Fortunately all the big parts are bought and paid for.
  19. C

    hypothetical, mpg

    First post/question coming in hot! Besides the aero complications, which are kinda "it is what it is", efficiency is the goal. Making the drivetrain as lightweight as possible yet able to handle the vehicle weight/engine torque, and low cruising RPM would be your best bet, that is apparently the...
  20. C

    JW's 383 build

    On the stand- cam bearings, freeze plugs, and oil galley plugs installed at machine shop. They also ran a machining program on their mill for strokercrank clearance. Cam card.
  21. C

    JW's 383 build

    You may have heard "Where there's a will there's a way", well there is also "If there's an impatient dumb*ss- it's gonna happen". I don't currently have a hoist but wanted to get the block off my trailer and onto a stand without a hernia, so I rigged up this mess:
  22. C

    JW's 383 build

    Messaged ChuckN about the die casts he had for sale and mentioned that I too am working on a 383 build. Although he suggested that I share my build on his thread I don't want to cobble it up with my slow pace. Alas mine is not for a Squarebody but instead for my '79 Cutlass. I have owned this...
  23. C

    Chuck’s engine build thread!

    I haven't seen anything on new cam specs? Did I just overlook it?
  24. C

    Thinking about changing from Detroit steels to these… whatcha think?

    p-Tina is looking pretty sweet. I've tried looking around different threads to figure out where you ended up with lowering hardware- could you tell us the current parts list? And current tire sizes? Is the big block and 4l80 all sorted out now?
  25. C

    Summit Pro SBC roller camshaft 8800

    What did you do for a distributor gear? I bought a 8802 cam for a (2026) 383 build and that is one piece I'm unsure of.

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,340
Latest member
hauto85
Top