Search results
-
Hello from SE Texas
Welcome. I own a lawn business too. Let's see that Sub!- mlsceo
- Post #6
- Forum: Introduction
-
-
Show me your lowered truck. The lower the better!
Maybe try a 235/70 up front. It's only .30" narrower and it's 1.4" taller so it fills out the wheel well better and will give you better ground clearance. It will fit well on an 8" wheel. You can see the 235/70 on my truck, post#3 and #18- mlsceo
- Post #29
- Forum: Lowered & Street Systems
-
LMC tailgate mat
I have their bed mat and am happy with it, Sounds like the tailgate mat is made of the same material, but you'll need to attach it of course. That means drilling and I didn't want to do that.- mlsceo
- Post #4
- Forum: Aftermarket Accessories
-
Question about converting to a roller cam
I put a Comp Cams roller in my boat a few years back. Factory LS6 MK IV. Give them a call, they can set you right up with everything you need.- mlsceo
- Post #4
- Forum: Engine & Performance
-
Show me your lowered truck. The lower the better!
235/70-15 front, 275/60-15 rear, with 2.5" drop spindles+2" drop springs in front, and flip kit out back.- mlsceo
- Post #18
- Forum: Lowered & Street Systems
-
Show me your lowered truck. The lower the better!
Looks like a 50 series front tire? You lose a lot of ground clearance with that choice.- mlsceo
- Post #17
- Forum: Lowered & Street Systems
-
-
Smoke Blue Metallic - where to find for touch ups
Automotivetouchup.com They have your code 27. They call it light blue metallic.- mlsceo
- Post #5
- Forum: Paint and Body
-
-
My new truck. 1980 GMC k3500 4x4 DUALLY
That is one kickass truck.- mlsceo
- Post #20
- Forum: Introduction
-
Lowering my 82 C20
Call Switch Suspension, 800-928-1984. They can set you up with what you need.- mlsceo
- Post #2
- Forum: Suspension, Steering & Brakes
-
Just advice please
Bring that puppy home and keep us posted as to how it all works out.- mlsceo
- Post #17
- Forum: Engine & Performance
-
Dash Brake light comes on after a couple minutes of driving
My dash warning light was doing the same thing. Changed the master cylinder, (it was weeping fluid) and the light issue disappeared.- mlsceo
- Post #7
- Forum: Suspension, Steering & Brakes
-
new glass options
The windshield in my 77 is factory original and definitely tinted green.- mlsceo
- Post #6
- Forum: Glass & Mirrors
-
-
Gauge cluster
I replaced my temp and volt gauges with LMC units. Work and look great, $35 and $40 respectively. The temp gauge for yours is on backorder though. What test method are you using? -
1982 C30 looking for 4/6 drop. What did you actually get versus what was advertised?
My truck is a C10 but to give you an example. I installed a kit advertised as 4.5/6. The actual result at the rear was 7. The front was 5.5. I was perfectly happy with the rear. In front I ended up using a 5/8" aluminum spring spacer to put the drop where I wanted it. Turned out the aftermarket...- mlsceo
- Post #2
- Forum: Lowered & Street Systems
-
Starter problems after doing 5 speed swap
You mean finish. I have a friend whose wife is Finnish, she's really nice.- mlsceo
- Post #39
- Forum: Tech Discussion
-
How would you make this truck less ugly??
So the screen writers on Gilligan's Island were pulling our legs the whole time!! :33:- mlsceo
- Post #29
- Forum: Paint and Body
-
How would you make this truck less ugly??
Yes, Go with God. So often folks will use a word or phrase in Spanish and not get it right. Just trying to be helpful. A perfect example that I hear all the time "mano y mano" It's actually "mano a mano". Means "hand to hand" as in fighting, competing, etc. When a "y" is used rather than an "a"...- mlsceo
- Post #27
- Forum: Paint and Body
-
Header swap begins.
Now that I've taken a closer look at the pics, yep, stainless. :) Actually my system is stainless as well. the cermachrome helps with heat radiation.- mlsceo
- Post #24
- Forum: Engine & Performance
-
How would you make this truck less ugly??
Not sure what that means. I was simply correcting the spelling in post #18- mlsceo
- Post #23
- Forum: Paint and Body
-
-
Header swap begins.
Nice job with the wrap. I'm on the Xweb forum and there has been a lot of discussion about wraps holding moisture and causing premature rusting on headers. I had mine done in Cermachrome. Maybe keep an eye on that if you get much wet weather down the road. Here's the ride that header is on.- mlsceo
- Post #18
- Forum: Engine & Performance
