Search results

  1. Rumbledawg

    Duel Tank Question

    was your gauge at the 3:00 position by chance?
  2. Rumbledawg

    1987 Chevy R20 454 power steering reservoir hose

    actually it's .72 id and it comes a little long so you can trim it. this hose will fit from your ps pump to the ps reservoir mounted up high at the front of the block
  3. Rumbledawg

    Duel Tank Question

    ya, it doesn't look like my throttle body either...it does look almost like a 2 barrel. every pro flo i've seen is a 4 throater, but every thing else looks edelbrock all the way. maybe someone changed or used a diff throttle body, meaning it would have to be a pf2 or pf3 as there is no...
  4. Rumbledawg

    Front driveshaft clunk

    as mentioned, i would check the cv ball first. when you say you removed metal in the cv, did you mean the angle stops? i had to grind mine out, first time out it sounded horrible and kept binding and grabbing. their the little bumps inside the cv limiting how far they can go (angle-wise)
  5. Rumbledawg

    Spring Lift Ride Question

    this unless you spend mucho bucks for custom rear springs, lifted leaves will ride worse than your stock leafs. one thing to think about also, will you be hauling loads with the truck? i orig had 8" lift springs all the way around on my truck, but after carrying my camper and quads for TWO yrs...
  6. Rumbledawg

    1987 Chevy R20 454 power steering reservoir hose

    replaced the same hose on my 454 last yr when i swapped my steering box. bought a Gates hose, #362100...be aware, there not cheap, $50-$90 depending where ya get it
  7. Rumbledawg

    Duel Tank Question

    it is possible your truck was factory fi being an '87 and having in tank pumps, but i seriously doubt there is in tank pumps now. if you had in tank pumps, installing the pro flo external pump would be unnecessary. your pump is a Walbro and their extremely reliable, and have more than enough...
  8. Rumbledawg

    Duel Tank Question

    the older pro-flo's (1,2,3) use external pumps. i'm assuming he wasn't running a pf4 as he says the resto is a few yrs old. if it is a 1, 2, or 3, it is wired correctly. after thinking about what he has said, i would be checking the selector valve for obstructions, fuel out the weep hole, or...
  9. Rumbledawg

    New K30 CUCV member

    welcome good to see another BC'er here. ya, bigger tires will slow down your rpms. i have 4:56's in my crew, with the T400 and stock tires, my 454 would be wound right up at around 35-3600 rpm at 55-60 on the freeway. with my 38's on it, it comes down to a little more reasonable 29-3000 rpm's...
  10. Rumbledawg

    Duel Tank Question

    edelbrock fuel injection systems are some of the best aftermarket ones going. there super reliable. being one of the best also means comes with a hefty price tag. to help keep costs down for the avg. gearhead, they use an external fuel pump, as you have noted. yes, your single pump will run...
  11. Rumbledawg

    ignition switch feeling stiff

    before ya rip apart your column, check your key. when they get a little worn, they can become cranky. i replaced the keys for my stepper and my crewy when they started getting hard to rotate and all my probs disappeared, and didn't have to touch the column. sometimes KISS can save you a lot of work.
  12. Rumbledawg

    Electric Fuel Pump

    don't know where your buying your walbro pumps from (amazon?) but every walbro i have ever bought has been made right here. as to quality issues, maybe some people aren't paying attention to flow...... and the walbro pump came standard on my pro-flo system, and after 18 yrs, you don't need to...
  13. Rumbledawg

    Electric Fuel Pump

    yes, i'm fuel injected
  14. Rumbledawg

    Electric Fuel Pump

    walbro fuel pumps. not chineseum i been running an external Walbro fuel pump for my fi big block for close to 18 yrs before it crapped out....and it wasn't the pumps fault, i got too far out in the bush and ended up running my tanks almost dry. of course i replaced it with another Walbro pump...
  15. Rumbledawg

    What gauge size/diameter to replace stock ??

    if your talking about these gauges, then ya, Mike is right, 2 1/16". as you have to irrevocably modify your cluster, i would suggest doing all the small gauges at once. when i bought my square, only the speedo was working. i was going to change all the gauges, but i got my fuel gauge working so...
  16. Rumbledawg

    Dana 60 Death Wobble

    only had wobble on my 60 when i put my bias swamps on ( 42's) and it only happened at around 30 mph, go faster or slower and it would disappear, hold it at 30 and it could get pretty violent. new kingpin bushings, new bearings, spring bushings, cross over and stabilizers, nothing would get rid...
  17. Rumbledawg

    Pissing match

    you need the 4x6 led headlights. my son wanted to upgrade the crappy sealed beams in his '91 firebird for some leds, but he didn't like the looks of most of the led headlamps. found some glass 4x6 leds that look totally factory. when i went halogen on my '85 crew i needed to modify the buckets...
  18. Rumbledawg

    Need a new one, so Sliding or Solid Rear Window?

    this^^^ broke the glass on my stock slider, went with the one piece slider-waaaay better. no rattles and more secure. prob be replacing the factory double slider in my '90 stepper with a single as well, rattles like a mother
  19. Rumbledawg

    New Carpet, install Dynamat first?

    Custom Deluxe here, came with a mat on the floor and nothing else. wit a big block and 42" tires i had to always yell at my wife sitting in the pass. seat. used close to 100 sq ft in my crew. went from the rear winda to the dash and inside and outside of the doors, their like big echo chambers...
  20. Rumbledawg

    Champion radiator difficulties

    i think champion classify's them more by size. there web site says the 3 core will fit big and small blocks. and they have diff sizes of 2, 3, and 4 core rads for squares. i would suggest measure your stock rad then order the one closest in size to it. their 3 core was 1/8's difference in size...
  21. Rumbledawg

    Champion radiator difficulties

    like i said, installed it about 13 yrs ago so kinda hazy, but i do remember measuring height and width of my old one, didn't specific model order it. give me some time, i know i got the receipt in my big box of bills
  22. Rumbledawg

    Champion radiator difficulties

    weird.... i got a champ 3 core as well and it dropped right into my 85 crew-no mods. shroud, panel even my stock hoses fit . installed it '09, never had a prob, never overheats, even going thru the mountains with the camper and quad trailer
  23. Rumbledawg

    Distributor bat terminal remote kill switch/

    i prefer the MagnaVolt system. it won't even run down your battery.....
  24. Rumbledawg

    How much does your square body weigh?

    '85 K30 crew they leave the scales on at the truck scales all the time so i am always driving over it. lightest was 7600 lbs with a 1/4 tank of fuel and an empty truck, heaviest was 16 100 lbs with the camper, quad trailer and the boat
  25. Rumbledawg

    Dana 60 hubcaps.

    niiiice! would love to get a set in good shape as them

Latest posts

Forum statistics

Threads
48,666
Posts
1,074,187
Members
43,338
Latest member
hauto85
Top